Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Placement on Vehicle | Front |
| Weight | 0.741 kg |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 6x Febi Screw (43413)
£102.98
Important compatibility info
| Weight | 0.394 kg |
| Function | Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 116 |
| Width | 16 mm |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47946)
- 1x Febi Toothed Belt, power take-off (49234)
- 1x Febi Tensioner Pulley, timing belt (100320)
- 1x Febi Bolt, tensioner pulley (196873)
£103.02
Important compatibility info
| Number of Teeth | 116 |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Weight | 1.531 kg |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Replaces | 104948 |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (103080)
- 1x Febi Water Pump, engine cooling (39304)
£103.07
Important compatibility info
| Material | Plastic |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Weight | 0.14 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.GG |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.08
Important compatibility info
| Material | Plastic |
| Weight | 0.98 kg |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.10
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 183228 |
| Weight | 2.9 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.12
Important compatibility info
| Weight | 0.498 kg |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.17
Important compatibility info
| Weight | 7.2 kg |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 274 mm |
| Thickness | 82.3 mm |
| Brake Disc Thickness | 10.9 mm |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 52.3 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.18
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 375 mm |
| Thickness | 119 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 37 mm |
| Bolt Hole Circle Diameter | 142 mm |
| Surface | Coated |
| Function | Brake Disc |
| Weight | 24.240 kg |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.18
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Machining | High-carbon |
| Weight | 10.6 kg |
| Surface | Coated |
| Centering Diameter | 63 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Brake Disc Thickness | 25 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 350 mm |
| Minimum thickness | 23 mm |
| Thickness | 48.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.19
Important compatibility info
| Additional Information | with belt tensioner for V-ribbed belt |
| Length | 1642 mm |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Weight | 0.928 kg |
| Number of Ribs | 6 |
| Units / Pulleys | incl. deflection pulley |
| Width | 21 mm |
| Operating Mode | Automatic |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (39793)
- 1x Febi Belt Tensioner, v-ribbed belt (45554)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (100154)
£103.21
Important compatibility info
| Weight | 2.40 kg |
| Placement on Vehicle | Front Axle |
| Width | 150 mm |
| Outer diameter | 150 mm |
| Thickness | 89.6 mm |
| Inner diameter | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (27163)
- 1x Febi Wheel Bearing (27164)
- 1x Febi Shaft Seal, wheel hub (38868)
- 1x Febi Shaft Seal, wheel hub (27165)
£103.21
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M29x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 9.669 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 864 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.22
Important compatibility info
| Function | Bellow, air suspension |
| Weight | 6.5 kg |
| Outer diameter | 227 mm. 190 mm |
| Thickness | 272 mm. 525 mm |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.23
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with piston |
| Outer diameter | 259 mm. 175 mm |
| Thickness | 130 mm. 520 mm |
| Weight | 7.8 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M16 x 1,5, M12 x 1,5, M18 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.25
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Weight | 9.8 kg |
| Type | Spring-loaded Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Function | Spring-loaded Cylinder |
| Placement on Vehicle | Right |
| Paired article numbers | 184763 |
| Brake Type | Disc Brake |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.25
Important compatibility info
| Additional Information 2 | with switch, with bolts/screws |
| Weight | 0.93 kg |
| Type | Steering Lock |
| Function | Steering Lock |
| Lock System | with two keys, with lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.25
Important compatibility info
| Placement on Vehicle | both sides, Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 3.900 kg |
| for OE number | 2 611 113 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.27
Important compatibility info
| Weight | 5.6 kg |
| External Thread Size | M10 x 1,5, M22 x 1,5 |
| Outer diameter | 228 mm. 242 mm |
| Thickness | 125 mm. 515 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Axle | Lift Axle |
| Additional Information | with piston |
| Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.27
Important compatibility info
| Weight | 0.51 kg |
| Width | 41.5 mm |
| Outer diameter | 55 mm |
| Function | Tensioner Pulley, timing belt |
| Additional Information 2 | with screw |
| Type | Tensioner Pulley, timing belt |
| Additional Information | with spring |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, tensioner pulley (31844)
- 1x Febi Tension Spring, tensioner pulley (timing belt) (31828)
- 1x Febi Tensioner Pulley, timing belt (31310)
£103.31
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023