Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 3.05 kg |
| Placement on Vehicle | Lower Front Axle, Rear |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Type | Alternator |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 48 mm |
| Alternator Charge Current | 80 A |
| Weight | 4.95 kg |
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Function | Master Cylinder, clutch |
| Additional Information | with gasket/seal |
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Driver Position | for right-hand drive vehicles |
| Type | Master Cylinder, clutch |
| Weight | 0.264 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.68
Important compatibility info
| Weight | 6.70 kg |
| Thickness | 435 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bellow, air suspension |
| Internal Thread Size | M10 x 1,5, M12 x 1,75, M16 x 1,5 |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.72
Important compatibility info
| Weight | 0.97 kg |
| Function | Joint, propshaft |
| Outer diameter | 160 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
| Number of Holes | 8 |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101772)
- 8x Febi Collar Bolt, propshaft (31177)
- 8x Febi Nut (19104)
- 8x Febi Washer (19107)
£106.74
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 228 mm |
| Thickness | 290 mm. 500 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Weight | 9.1 kg |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.75
Important compatibility info
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 202 mm |
| Thickness | 240 mm. 600 mm |
| External Thread Size | M12 x 1,75, M20 x 1,5, M16 x 2 |
| Weight | 9.5 kg |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.80
Important compatibility info
| Weight | 7.128 kg |
| Thread Size | M20x1,5 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| External Teeth, Diff.Side | 22 |
| Min. Length | 973 mm |
| ABS Ring Diameter | 86 mm |
| Wheel Sided Joint Diameter | 76.3 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.81
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 4.4 kg |
| Outer diameter | 81 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Width | 136 mm |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.89
Important compatibility info
| Weight | 0.873 kg |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49713)
- 1x Febi Tensioner, timing chain (170098)
- 1x Febi Guide, timing chain (170101)
- 1x Febi Guide, timing chain (170103)
£106.97
Important compatibility info
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 112 |
| Chain Type | Simplex, Closed chain |
| Weight | 1.021 kg |
| for OE number | 11 31 1 485 400 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31803)
- 1x Febi Tensioner, timing chain (37587)
- 1x Febi Guide, timing chain (37586)
- 1x Febi Guide, timing chain (37588)
- 1x Febi Screw Plug, timing chain tensioner (37589)
- 1x Febi Gear/Sprocket, camshaft (177237)
- 1x Febi Sprocket, crankshaft (177084)
- 1x Febi Shaft Seal, crankshaft (177734)
£107.01
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Wheel Sided Joint Diameter | 72.7 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Drive Shaft |
| Transmission-side joint diameter | 72 mm |
| Weight | 5.556 kg |
| Min. Length | 748 mm |
| Thread Size | M10 x 1,5 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.03
Important compatibility info
| Number of spring leaves | 1 |
| Length | 695 mm. 672 mm |
| Function | Spring Pack |
| Type | Spring Pack |
| Weight | 12.2 kg |
| Spring Design | Leaf spring |
| Width | 57 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.04
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 205 mm. 228 mm |
| Thickness | 340 mm |
| Weight | 8.3 kg |
| External Thread Size | M14 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.05
Important compatibility info
| Minimum thickness | 38 mm |
| Bolt Hole Circle Diameter | 144 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Surface | Coated |
| Function | Brake Disc |
| Number of Holes | 10 |
| Thickness | 99 mm |
| Weight | 23.9 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 375 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.13
Important compatibility info
| Height | 239 mm |
| Outer diameter | 117 mm |
| Filter type | Filter Insert |
| Function | Fuel filter set |
| Type | Fuel filter set |
| Weight | 0.690 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.18
Important compatibility info
| Weight | 5.476 kg |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40342 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (14522)
- 2x Febi Camber Correction Screw (07758)
- 1x Febi Bolt, control arm (11154)
- 1x Febi Nut, exhaust manifold (01554)
- 1x Febi Nut (06877)
- 1x Febi Nut (22263)
£107.20
Important compatibility info
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Weight | 2.088 kg |
| Type | Expansion Tank, coolant |
| Additional Information | with lids |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.21
Important compatibility info
| Extra Description | febi Plus |
| for OE number | 22391563 |
| Function | Dosing Module, urea injection |
| Type | Dosing Module, urea injection |
| Weight | 0.283 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.22
Important compatibility info
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 258 mm. 178 mm |
| Thickness | 280 mm. 130 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M12 x 1,5, M18 x 2 |
| Weight | 8.53 kg |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.24
Important compatibility info
| Weight | 11.5 kg |
| Placement on Vehicle | Rear Axle |
| Length | 575 mm |
| Steering arm type | Trailing Arm, Triangular Control Arm (CV) |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.29
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 612 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 20 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.32
Important compatibility info
| Number of Wings | 7 |
| Material | Grey Cast Iron |
| Number of Teeth | 23 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Weight | 4.17 kg |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.36
Important compatibility info
| Distance of fastening bolts | 120 mm |
| Weight | 8.1 kg |
| Piston Rod Length | 15 mm |
| Function | Spring-loaded Cylinder |
| Internal Thread Size | M16 x 1,5 |
| Brake Type | Disc Brake |
| Type | Spring-loaded Cylinder |
| Parameter | Typ 16 / 24 |
| Stroke | 64 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.45
Important compatibility info
| Weight | 9.1 kg |
| Placement on Vehicle | Rear Axle |
| Width | 72.1 mm |
| Outer diameter | 310.7 mm |
| Thickness | 88 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Number of mounting bores | 1 |
| Max.skimmed drum measure | 269.5 mm |
| Function | Brake Drum |
| Rim Hole Number | 5 -Hole |
| Inner Brake Drum Diameter | 268 mm |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.47
Important compatibility info
| Weight | 1.043 kg |
| Type | Valve Plate, air compressor |
| Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.48
Important compatibility info
| Weight | 0.116 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Actuator, central locking system |
| Extra Description | febi Plus |
| Type | Actuator, central locking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.52
Important compatibility info
| Thickness | 124 mm. 519 mm |
| Outer diameter | 258 mm. 229 mm |
| Function | Bellow, air suspension |
| Placement on Vehicle | Front Axle |
| Weight | 8.0 kg |
| Type | Bellow, air suspension |
| External Thread Size | M16 x 1,5 |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.54
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 25 mm |
| Weight | 7.326 kg |
| Paired article numbers | 181823 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.59
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 181829 |
| Weight | 7.326 kg |
| Cone Size | 25 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.59
Important compatibility info
| Weight | 12.2 kg |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05040 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 190 |
| Timing Chain Size | G68HRF |
| Function | Timing Chain |
| Type | Timing Chain |
| Weight | 1.040 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Weight | 1.16 kg |
| Type | Valve Plate, air compressor |
| Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Number of mounting bores | 3 |
| Type | Central Slave Cylinder, clutch |
| Weight | 0.456 kg |
| for OE number | 1 672 781 |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Weight | 3.86 kg |
| Type | Starter |
| Function | Starter |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Length | 110 mm |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 58 80 |
| Width | 95 mm |
| Height | 95 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Weight | 2.229 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Number of Connectors / Ports | 5 |
| Function | Ignition Coil |
| Weight | 1.63 kg |
| Type | Ignition Coil |
| for OE number | 078 905 104 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 3 |
| Weight | 0.06 kg |
| Type | Sensor, oil pressure |
| Function | Sensor, oil pressure |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Surface | Coated |
| Number of Teeth | 163 |
| Type | Water Pump & Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Width | 24 mm |
| Weight | 1.302 kg |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (30792)
- 1x Febi Water Pump, engine cooling (10599)
£107.65
Important compatibility info
| Water pump impeller material | Metal |
| Width | 23 mm |
| Number of Teeth | 142 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Weight | 1.925 kg |
| for OE number | 30731727 S1 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (27559)
- 1x Febi Water Pump, engine cooling (22145)
£107.65
Important compatibility info
| Type | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Weight | 4.0 kg |
| Mounting points diameter | 14 mm |
| Pipe Diameter | 45 mm |
| Max. Length | 429 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1056 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 12.37 kg |
| Cone Size | 27 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Cone Size 2 | 30 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M38 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 50 mm |
| Weight | 5.0 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from engine to engine cooler |
| Weight | 1.052 kg |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Weight | 4.48 kg |
| Material | Grey Cast Iron |
| Number of grooves | 12 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| for OE number | 5 0035 6553 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Weight | 1.709 kg |
| Length | 516 mm |
| Height | 145 mm |
| Width | 289 mm |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Paired article numbers | 188146 |
| External Teeth, Wheel Side | 36 |
| Weight | 5.073 kg |
| External Teeth, Diff.Side | 28 |
| Min. Length | 627 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Type | Centre Rod Assembly |
| Weight | 11.460 kg |
| Placement on Vehicle | Front Axle |
| Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Pipe Diameter | 62 mm |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Additional Information 2 | with crown nut |
| Internal Thread Size | M38 x 1,5 LHT, M30 x 1,5 RHT |
| Pipe Diameter | 50 mm |
| Weight | 9.18 kg |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Cone Size 2 | 30 mm |
| External Thread Size | M24 x 1,5 |
| Length | 978 mm |
| Placement on Vehicle | Front Axle |
| Cone Size | 27 mm |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| External Thread Size | M16 x 2, M10 x 1,5, M22 x 1,5 |
| Outer diameter | 226 mm. 190 mm |
| Thickness | 533 mm. 138 mm |
| Function | Bellow, air suspension |
| Weight | 6.430 kg |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023