Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 4.976 kg |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 14522 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.58
Important compatibility info
| Paired article numbers | 104660 |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Weight | 2.594 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.58
Important compatibility info
| for OE number | 02M 911 024 PX |
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.7 kW |
| Weight | 3.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 38 |
| Weight | 12.311 kg |
| External Teeth, Diff.Side | 25 |
| Min. Length | 880 mm |
| Wheel Sided Joint Diameter | 106 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Weight | 0.58 kg |
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Stabiliser Diameter | 21 mm |
| Length | 1075 mm |
| Placement on Vehicle | Front Axle |
| Function | Stabiliser Bar, suspension |
| Weight | 4.55 kg |
| Additional Information | with rubber mounts |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (36651)
- 1x Febi Repair Kit, stabiliser bush (36757)
£105.63
Important compatibility info
| Weight | 2.400 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Weight | 3.755 kg |
| Additional Information | with lids |
| Length | 750 mm |
| Width | 330 mm |
| Material | PP (Polypropylene) |
| Thickness | 200 mm |
| Pressure | 0.9 bar |
| Function | Expansion Tank, coolant |
| Fill quantity | 11.5 l |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Weight | 2786.0 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 139 mm |
| Outer diameter | 139 mm |
| Thickness | 100 mm |
| Inner diameter | 28 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bolt Hole Circle Diameter | 114 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (185358)
- 1x Febi Nut (185828)
£105.63
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1734 mm |
| Width | 35 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Weight | 11.0 kg |
| Thickness | 103 mm |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Number of Chain Links | 138 |
| Extra Description | Basic Short Kit |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Weight | 1.039 kg |
| Chain Type | Silent Chain, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (108221)
- 1x Febi Tensioner, timing chain (180751)
- 1x Febi Guide, timing chain (180870)
- 1x Febi Guide, timing chain (180868)
£105.67
Important compatibility info
| for OE number | 403 180 17 01 |
| Weight | 4.5 kg |
| Type | Oil Pump |
| Function | Oil Pump |
| Number of Teeth | 44. 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | with electric motor |
| Type | Window Regulator |
| Function | Window Regulator |
| Operating Mode | Electric |
| Weight | 1.6 kg |
| Paired article numbers | 180627 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Seal Material | Rubber |
| Weight | 9.46 kg |
| Material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Number of Wings | 12 |
| Water pump impeller material | Grey Cast Iron |
| Replaces | 12848 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Inner diameter | 10 mm. 45 mm |
| Outer diameter | 185 mm |
| Material | Rubber/Metal |
| Weight | 3.34 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Function | Cylinder Head, air compressor |
| Weight | 2.2 kg |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Width of castor bearing surface | 24 mm |
| Width | 70 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Weight | 0.435 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1679 mm |
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Cone Size | 30 mm |
| Weight | 16.5 kg |
| External Thread Size | M24 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
| Paired article numbers | 26720 |
| Function | Window Regulator |
| Additional Information | without electric motor |
| Type | Window Regulator |
| Weight | 1.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.282 kg |
| Voltage | 19 V |
| Spanner Size | 36 |
| Function | Glow Plug |
| Glow Plug Type | Flame Glow Plug |
| Type | Glow Plug |
| External Thread Size | M32 x 1,5 |
| Length | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 4.6 kg |
| for OE number | 31400-60G13-000 |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Number of Chain Links | 134 |
| Weight | 1.182 kg |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | 1 717 599 S1 |
| Chain Type | Simplex, Closed chain |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (182108)
- 1x Febi Tensioner, timing chain (46511)
- 1x Febi Guide, timing chain (179385)
- 1x Febi Guide, timing chain (179396)
- 1x Febi Guide, timing chain (179382)
- 1x Febi Guide, timing chain (46773)
£105.67
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 2.32 kg |
| Length | 433 mm |
| Spanner Size | 19 |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Weight | 0.07 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter, Left |
| Type | Sensor, exhaust gas temperature |
| for OE number | 07Z 906 088 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Weight | 6.074 kg |
| Number of mounting bores | 6 |
| Bolt Hole Circle Diameter | 86 mm |
| Thread Size | M27x1,5 |
| Bore Diameter | 10.5 mm |
| Min. Length | 682 mm |
| ABS Ring Diameter | 83 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Weight | 0.24 kg |
| Operating Mode | Hydraulic |
| Thickness | 54 mm |
| Function | Tensioner, timing belt |
| Outer diameter | 32 mm |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Weight | 6.66 kg |
| Voltage | 12 V |
| Function | Alternator |
| Type | Alternator |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 43020 |
| Cone Size | 20 mm |
| External Thread Size | M16 x 1,5 |
| Weight | 6.995 kg |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Rod/Strut | Push Rod |
| Length | 620 mm |
| Outer diameter | 40 mm |
| Weight | 7.3 kg |
| Cone Size | 30.2 mm |
| Thread Type | with left-hand thread, with right-hand thread |
| Placement on Vehicle | from 1st idler arm to the 2nd idler arm |
| Pipe Diameter | 38 mm |
| Function | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Weight | 3.5 kg |
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 396 mm |
| Min. Length | 314 mm |
| Pipe Diameter | 45 mm. 55 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Paired article numbers | 180616 |
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Weight | 1.6 kg |
| Operating Mode | Electric |
| Function | Window Regulator |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Type | Starter |
| Number of Teeth | 8 |
| Rated Power | 0.8 kW |
| Weight | 3.28 kg |
| Voltage | 12 V |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Number of Ribs | 8 |
| Weight | 2.350 kg |
| Length | 2130 mm |
| Function | V-Ribbed Belt Set |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
| Type | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29077)
- 1x Febi Belt Tensioner, v-ribbed belt (23293)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (23296)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (23294)
£105.67
Important compatibility info
| Weight | 0.525 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.68
Important compatibility info
| Function | Oil Pump |
| Weight | 1.275 kg |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.72
Important compatibility info
| Width of castor bearing surface | 46 mm |
| Material | Metal |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Weight | 1.608 kg |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.73
Important compatibility info
| Length | 379 mm |
| Outer diameter | 300 mm |
| Number of Connectors / Ports | 5 |
| Weight | 7.0 kg |
| Capacity | 20 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.73
Important compatibility info
| Weight | 4.800 kg |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| External Thread Size | M18 x 1,5 |
| for OE number | 960 241 00 14 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.74
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 745 mm |
| Steering arm type | Control Arm |
| Bore Diameter | 21 mm |
| Weight | 11.600 kg |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.78
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Weight | 9.8 kg |
| Type | Spring-loaded Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Function | Spring-loaded Cylinder |
| Placement on Vehicle | Right |
| Paired article numbers | 184763 |
| Brake Type | Disc Brake |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.79
Important compatibility info
| Weight | 1.694 kg |
| Width of castor bearing surface | 39 mm |
| Outer diameter | 65 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Material | Metal |
| Type | Belt Tensioner, V-ribbed belt |
| Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.90
Important compatibility info
| Track rollers material | Metal |
| Additional Information 2 | with ball joint |
| Material | Aluminium |
| Placement on Vehicle | Left, Lower Front Axle |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 176882 |
| Rod/Strut | Pull Rod |
| Weight | 4.742 kg |
| Cone Size | 22.7 mm |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Additional Information | with hydro mount, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.92
Important compatibility info
| Length | 222 mm |
| Width | 44 mm |
| Outer diameter | 73 mm |
| Thickness | 142 mm |
| Inner diameter | 47 mm |
| Weight | 0.925 kg |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.94
Important compatibility info
| Function | Water Pump, engine cooling |
| Material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Weight | 11.5 kg |
| Seal Material | Rubber, Paper |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.96
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 6.96 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 260 mm |
| Thickness | 86.2 mm |
| Brake Disc Thickness | 8 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Function | Brake Disc |
| Surface | Oiled |
| Centering Diameter | 52.3 mm |
| Type | Brake Disc Rotor |
| Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.96
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Weight | 0.647 kg |
| Additional Information 2 | without screw |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 46 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.97
Important compatibility info
| Weight | 2.8 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 131 mm |
| Outer diameter | 84 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.99
Important compatibility info
| Outer diameter | 190 mm. 228 mm |
| Thickness | 610 mm. 180 mm |
| Function | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M16 x 2, M22 x 1,5 |
| Type | Bellow, air suspension |
| Weight | 6.0 kg |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 228 mm. 225 mm |
| Thickness | 153 mm. 410 mm |
| Function | Bellow, air suspension |
| External Thread Size | M12 x 1,5 |
| Weight | 7.3 kg |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.08
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 654 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.9 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.16
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023