Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.254 kg |
| Type | Solenoid Valve, retarder |
| Length | 90 mm |
| Thickness | 40 mm |
| Function | Solenoid Valve, retarder |
| Width | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.59
Important compatibility info
| Weight | 1.5 kg |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Function | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 145 mm |
| Outer diameter | 145 mm |
| Thickness | 90 mm |
| Bolt Hole Circle Diameter | 67 mm |
| Function | Wheel Bearing Kit |
| Weight | 2.668 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (24994)
- 1x Febi Wheel Bearing (05417)
- 1x Febi Anti-friction Bearing Grease (28194)
£108.60
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.2 kW |
| Weight | 3.9 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1515 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Weight | 11.7 kg |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Weight | 1.392 kg |
| Material | Plastic |
| Colour | Black |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 1.8 kW |
| Weight | 3.85 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.60
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 160 |
| Surface | Coated |
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Type | Timing Belt Kit |
| Weight | 1.805 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (34127)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (17712)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (24754)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (21708)
- 1x Febi Tensioner Pulley, timing belt (30215)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (177915)
£108.62
Important compatibility info
| Weight | 1.57 kg |
| Seal Material | Rubber |
| Number of grooves | 6 |
| Function | Water Pump, engine cooling |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Additional Information 2 | switchable water pump |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Outer diameter | 198.5 mm |
| Inner diameter | 45 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 6.54 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Type | Centre Rod Assembly |
| Weight | 11.460 kg |
| Placement on Vehicle | Front Axle |
| Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Pipe Diameter | 62 mm |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| External Thread Size | M16 x 2, M10 x 1,5, M22 x 1,5 |
| Outer diameter | 226 mm. 190 mm |
| Thickness | 533 mm. 138 mm |
| Function | Bellow, air suspension |
| Weight | 6.430 kg |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Number of Connectors / Ports | 5 |
| Function | Ignition Coil |
| Weight | 1.63 kg |
| Type | Ignition Coil |
| for OE number | 078 905 104 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Weight | 3.9 kg |
| Pipe Diameter | 45 mm |
| Min. Length | 349 mm |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Piston Diameter | 20 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 10.290 kg |
| Length | 223 mm |
| Outer diameter | 49.5 mm. 50 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Sealing/Protective Cap (08522)
- 4x Febi Grease Nipple (01094)
- 4x Febi Circlip (03729)
- 4x Febi Lock Ring, steering knuckle (03728)
- 4x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Spacer, kingpin (15758)
- 2x Febi Bush, steering knuckle (08524)
- 4x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Kingpin (03785)
- 2x Febi Bush, kingpin (03789)
- 2x Febi Spacer, kingpin (05007)
- 2x Febi Spacer, kingpin (05008)
- 2x Febi Spacer, kingpin (05009)
- 2x Febi Spacer, kingpin (05010)
- 2x Febi Spacer, kingpin (04997)
- 2x Febi Spacer, kingpin (04998)
- 2x Febi Spacer, kingpin (04999)
- 2x Febi Spacer, kingpin (05000)
- 2x Febi Spacer, kingpin (05001)
£108.64
Important compatibility info
| for OE number | 21100904 |
| Number of Connectors / Ports | 2. 3 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 687 mm |
| Weight | 0.820 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Function | Cable Pull, manual transmission |
| Weight | 1.110 kg |
| for OE number | 81.32655.6311 |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 2845 mm |
| Outer length 1 | 3190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Weight | 0.904 kg |
| Type | Wiper Motor |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Function | Wiper Motor |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
| Function | Alternator |
| Weight | 5.5 kg |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from engine to engine cooler |
| Weight | 1.052 kg |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 6.220 kg |
| Min. Length | 473 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Length | 172 mm |
| Outer diameter | 32 mm |
| Function | Repair Kit, kingpin |
| Weight | 3.3 kg |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Kingpin (29731)
- 2x Febi Bush, steering knuckle (29732)
- 2x Febi Bush, kingpin (29733)
- 2x Febi Bush, kingpin (29734)
- 4x Febi Seal Ring, steering knuckle (29735)
- 2x Febi Seal Ring, steering knuckle (29736)
- 2x Febi Seal Ring, steering knuckle (29737)
- 2x Febi Spacer, kingpin (29740)
- 2x Febi Spacer, kingpin (29741)
- 2x Febi Spacer, kingpin (29742)
- 2x Febi Spacer, kingpin (29743)
£108.64
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 1.834 kg |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Type | Wiper Linkage |
| Function | Wiper Linkage |
| Extra Description | febi Plus |
| Weight | 4.07 kg |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Type | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Weight | 4.0 kg |
| Mounting points diameter | 14 mm |
| Pipe Diameter | 45 mm |
| Max. Length | 429 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 785 mm |
| Weight | 0.848 kg |
| Inner length 1 | 792 mm |
| Outer length 1 | 1015 mm |
| Outer length 2 | 1020 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 3 |
| Weight | 0.06 kg |
| Type | Sensor, oil pressure |
| Function | Sensor, oil pressure |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.64
Important compatibility info
| Parameter | 6PK |
| Additional Information 2 | with bolts/screws |
| Weight | 3.400 kg |
| Material | Rubber/Metal |
| Outer diameter | 185 mm |
| Number of Ribs | 5 |
| Inner diameter 1 | 10 mm |
| Inner diameter 2 | 45 mm |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (37419)
- 4x Febi Centering Bolt, crankshaft pulley (33076)
£108.65
Important compatibility info
| Extra Description | febi Plus |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 2. 10 |
| Weight | 0.304 kg |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.65
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.293 kg |
| for OE number | 22 11 6 860 482 |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.72
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023