Important compatibility info
Weight | 12.2 kg |
Additional Information 2 | with ball joint |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 05040 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of mounting bores | 3 |
Type | Central Slave Cylinder, clutch |
Weight | 0.456 kg |
for OE number | 1 672 781 |
Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.86 kg |
Type | Starter |
Function | Starter |
Number of Teeth | 10 |
Rated Power | 2.2 kW |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.16 kg |
Type | Valve Plate, air compressor |
Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.5 kg |
External Thread Size | M12 x 1,75 |
Placement on Vehicle | Rear |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 396 mm |
Min. Length | 314 mm |
Pipe Diameter | 45 mm. 55 mm |
Mounting points diameter | 16 mm |
Piston conrod diameter | 20 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Push Rod |
Length | 620 mm |
Outer diameter | 40 mm |
Weight | 7.3 kg |
Cone Size | 30.2 mm |
Thread Type | with left-hand thread, with right-hand thread |
Placement on Vehicle | from 1st idler arm to the 2nd idler arm |
Pipe Diameter | 38 mm |
Function | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.282 kg |
Voltage | 19 V |
Spanner Size | 36 |
Function | Glow Plug |
Glow Plug Type | Flame Glow Plug |
Type | Glow Plug |
External Thread Size | M32 x 1,5 |
Length | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 1679 mm |
Extra Description | ProKit |
Function | Tie Rod |
Type | Tie Rod |
Pipe Diameter | 52 mm |
Cone Size | 30 mm |
Weight | 16.5 kg |
External Thread Size | M24 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Operating Mode | Electric |
Paired article numbers | 26720 |
Function | Window Regulator |
Additional Information | without electric motor |
Type | Window Regulator |
Weight | 1.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 286 mm |
Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
Weight | 1.65 kg |
Function | Hydraulic Filter, automatic transmission |
Extra Description | febi Plus |
Filter type | Screen Filter |
Additional Information 2 | with bolts/screws |
Height | 59 mm |
Type | Hydraulic Filter, automatic transmission |
Length | 608 mm |
Transmission Type | Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Weight | 9.46 kg |
Material | Grey Cast Iron |
Function | Water Pump, engine cooling |
Number of Wings | 12 |
Water pump impeller material | Grey Cast Iron |
Replaces | 12848 |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Material | Grey Cast Iron |
Number of Wings | 8 |
Seal Material | Rubber |
Weight | 3.76 kg |
Type | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Additional Information 2 | with seal ring, with bolts |
for OE number | 5 0036 1919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head, air compressor |
Weight | 2.2 kg |
Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M27x1,5 |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Wheel Side | 30 |
Weight | 8.542 kg |
External Teeth, Diff.Side | 27 |
Min. Length | 971 mm |
Wheel Sided Joint Diameter | 86.2 mm |
Transmission-side joint diameter | 81.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 64.5 mm |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Type | Wheel Bearing Kit |
Weight | 3.303 kg |
Bearing Type | Angular Ball Bearing |
Inner diameter | 27 mm |
Outer diameter | 83 mm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 2.32 kg |
Length | 433 mm |
Spanner Size | 19 |
Type | Oil sump |
Function | Oil sump |
Extra Description | febi Plus |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.66 kg |
Voltage | 12 V |
Function | Alternator |
Type | Alternator |
Number of Ribs | 5 |
Pulleys | with belt pulley |
Alternator Charge Current | 120 A |
Belt Pulley Diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 4 |
Pulleys | with belt pulley |
Alternator Charge Current | 70 A |
Belt Pulley Diameter | 55 mm |
Weight | 4.6 kg |
for OE number | 31400-60G13-000 |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.2 kg |
Number of grooves | 7 |
Number of Wings | 8 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Suction side external thread size | M12 x 1,5 |
Number of Connectors / Ports | 3 |
Operating Mode | Manual |
Pressure side external thread size | M14 x 1,5 |
Function | Tilt Pump, driver cab |
Type | Tilt Pump, driver cab |
Weight | 2.4 kg |
Hole Spacing | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023