Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 4.4 kg |
| Outer diameter | 81 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Width | 136 mm |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.89
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.083 kg |
| Cable Length | 402 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.89
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Weight | 0.18 kg |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.95
Important compatibility info
| Weight | 1.57 kg |
| Seal Material | Rubber |
| Number of grooves | 6 |
| Function | Water Pump, engine cooling |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Additional Information 2 | switchable water pump |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.95
Important compatibility info
| Weight | 0.873 kg |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49713)
- 1x Febi Tensioner, timing chain (170098)
- 1x Febi Guide, timing chain (170101)
- 1x Febi Guide, timing chain (170103)
£106.97
Important compatibility info
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 112 |
| Chain Type | Simplex, Closed chain |
| Weight | 1.021 kg |
| for OE number | 11 31 1 485 400 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31803)
- 1x Febi Tensioner, timing chain (37587)
- 1x Febi Guide, timing chain (37586)
- 1x Febi Guide, timing chain (37588)
- 1x Febi Screw Plug, timing chain tensioner (37589)
- 1x Febi Gear/Sprocket, camshaft (177237)
- 1x Febi Sprocket, crankshaft (177084)
- 1x Febi Shaft Seal, crankshaft (177734)
£107.01
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 600 mm |
| Min. Length | 364 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 3.64 kg |
| Replaces | 20015 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.03
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Wheel Sided Joint Diameter | 72.7 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Drive Shaft |
| Transmission-side joint diameter | 72 mm |
| Weight | 5.556 kg |
| Min. Length | 748 mm |
| Thread Size | M10 x 1,5 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.03
Important compatibility info
| Number of spring leaves | 1 |
| Length | 695 mm. 672 mm |
| Function | Spring Pack |
| Type | Spring Pack |
| Weight | 12.2 kg |
| Spring Design | Leaf spring |
| Width | 57 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.04
Important compatibility info
| Min. Length | 380 mm |
| Pipe Diameter | 76 mm. 65 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| External Thread Size | M16 x 1,5 |
| Max. Length | 640 mm |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Weight | 5.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023