Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 7.526 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 687 mm |
| Wheel Sided Joint Diameter | 88.9 mm |
| Transmission-side joint diameter | 85.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 29 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.26
Important compatibility info
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
| Belts | with rounded tooth profile |
| Width of castor bearing surface | 27 mm |
| Weight | 1.430 kg |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Width | 22 mm |
| Number of Teeth | 117 |
| Surface | Coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (40849)
- 1x Febi Water Pump, engine cooling (39114)
£114.28
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 414 mm |
| Min. Length | 382 mm |
| Mounting points diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 5.0 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Pipe Diameter | 70 mm. 50 mm |
| Piston conrod diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.33
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bore Diameter | 16 mm |
| Shock Absorber Type | Gas Pressure |
| External Thread Size | M14 x 1,5 |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Pipe Diameter | 60 mm |
| Function | Shock Absorber |
| Weight | 6.227 kg |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Max. Length | 688 mm |
| Min. Length | 499 mm |
| Type | Shock Absorber |
| Piston conrod diameter | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.33
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 5.63 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 526 mm |
| Min. Length | 325 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Replaces | 20032 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.33
Important compatibility info
| Weight | 3.64 kg |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Thread Length | 30 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 512 mm |
| Min. Length | 322 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Replaces | 20122 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.33
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 600 mm |
| Min. Length | 350 mm |
| Pipe Diameter | 63 mm. 54 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| Weight | 3.9 kg |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.33
Important compatibility info
| Weight | 3.64 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 479 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Max. Length | 801 mm |
| Replaces | 20398 |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.33
Important compatibility info
| Weight | 6.35 kg |
| Type | Shock Absorber |
| Piston conrod diameter | 20 mm |
| Max. Length | 890 mm |
| Min. Length | 525 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 16 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.33
Important compatibility info
| Weight | 1.94 kg |
| Placement on Vehicle | Upper Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1807.Q4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.38
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 55 mm |
| Function | Alternator |
| Weight | 6.145 kg |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.39
Important compatibility info
| Weight | 1.1 kg |
| Placement on Vehicle | Left |
| Length | 124 mm |
| Outer diameter | 110 mm |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Number of Connectors / Ports | 2 |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.39
Important compatibility info
| Type | Repair Kit, control arm |
| Function | Repair Kit, control arm |
| for OE number | 179-23.30.213-02 S1 |
| Weight | 5.65 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Nut (15512)
- 1x Febi Fastening Bolt, control arm (15511)
- 2x Febi Spacer Ring (15516)
- 2x Febi Mounting, control/trailing arm (15513)
£114.41
Important compatibility info
| Function | Bellow, driver cab suspension |
| Type | Bellow, driver cab suspension |
| Placement on Vehicle | Front |
| Length | 265 mm |
| Outer diameter | 108 mm. 102 mm |
| Weight | 0.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.43
Important compatibility info
| Surface | Coated |
| Number of Teeth | 129 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Weight | 1.598 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (23437)
- 1x Febi Water Pump, engine cooling (24194)
£114.44
Important compatibility info
| Weight | 0.550 kg |
| for OE number | 03G 115 105 H |
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.52
Important compatibility info
| Weight | 1.170 kg |
| Width | 25.4 mm |
| Number of Teeth | 143 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (29270)
- 1x Febi Tensioner Pulley, timing belt (27376)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (27377)
£114.53
Important compatibility info
| Operating pressure to | 8 bar |
| for OE number | 49110-3X01A |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Weight | 1.906 kg |
| Rotation Direction | Clockwise rotation |
| Operating Mode | Hydraulic |
| Outer diameter | 17 mm |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.53
Important compatibility info
| Function | Timing Chain Kit |
| Weight | 0.973 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 180 |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (179465)
- 1x Febi Tensioner, timing chain (170729)
- 1x Febi Guide, timing chain (180667)
- 1x Febi Guide, timing chain (180500)
£114.57
Important compatibility info
| Number of Connectors / Ports | 2 |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Function | Mounting, engine |
| Weight | 1.509 kg |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.57
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1 kW |
| Weight | 3.2 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Clutch Booster |
| Weight | 2.934 kg |
| Type | Clutch Booster |
| Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Length | 1675 mm |
| Weight | 1.096 kg |
| Tensile Cord Material | Polyester |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Number of Ribs | 7 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (180079)
- 1x Febi Belt Tensioner, v-ribbed belt (100188)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (36826)
£114.58
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.86 kg |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 448 mm |
| Core Width | 153 mm |
| Core Depth | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Function | Starter |
| Weight | 3.96 kg |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Weight | 14.1 kg |
| Length | 1944 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Additional Information | with nuts |
| Weight | 13.0 kg |
| Placement on Vehicle | Front Axle |
| Length | 1657 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT, M30 x 1,5 LHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Number of mounting bores | 4 |
| Bolt Hole Circle Diameter | 110.5 mm |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 538 mm |
| Wheel Sided Joint Diameter | 88.90 mm |
| Transmission-side joint diameter | 79 mm |
| Weight | 5.618 kg |
| Bore Diameter | 10.9 mm |
| External Teeth, Wheel Side | 28 |
| Function | Drive Shaft |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Function | Oil Pump |
| Weight | 1.325 kg |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Number of Holes | 6 |
| Weight | 0.32 kg |
| Type | Solenoid Valve, shift cylinder |
| Function | Solenoid Valve, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Function | Timing Chain Kit |
| Weight | 0.711 kg |
| Number of Chain Links | 98 |
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain Kit |
| Timing Chain Size | G68V |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25404)
- 1x Febi Tensioner, timing chain (32786)
- 1x Febi Guide, timing chain (45731)
- 1x Febi Guide, timing chain (49229)
- 1x Febi Guide, timing chain (49231)
£114.58
Important compatibility info
| Weight | 12.2 kg |
| Placement on Vehicle | Front Axle |
| Length | 1734 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Internal Thread Size | M30 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Weight | 3.8 kg |
| Placement on Vehicle | Rear Axle |
| Width | 136 mm |
| Outer diameter | 81 mm |
| Inner diameter | 27 mm |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Weight | 1.7 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Pipe Diameter | 70 mm. 41 mm |
| Min. Length | 217 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 13 mm |
| Max. Length | 279 mm |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Operating Mode | Manual |
| Number of Connectors / Ports | 3 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Weight | 2.375 kg |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Weight | 0.843 kg |
| Function | EGR Valve |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Weight | 9.51 kg |
| Material | Grey Cast Iron |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Internal Thread Size | M10 x 1,5 |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 60 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.58
Important compatibility info
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Weight | 1.701 kg |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Function | Cylinder Head Cover |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.66
Important compatibility info
| Weight | 2.051 kg |
| Outer diameter | 390 mm |
| Rated Power | 90 W, 260 W |
| Number of Wings | 8 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.70
Important compatibility info
| Thickness | 62.5 mm |
| Outer diameter | 196 mm |
| Inner diameter | 34 mm |
| Number of Holes | 4 |
| Function | Belt Pulley, crankshaft |
| Width | 196 mm |
| Weight | 5.12 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.71
Important compatibility info
| Rolling piston material | Plastic |
| Weight | 5.9 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm. 200 mm |
| Thickness | 182 mm. 640 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M22 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.71
Important compatibility info
| Brake Disc Thickness | 32 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 322 mm |
| Thickness | 51.7 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 30 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Weight | 11.0 kg |
| Type | Brake Disc Rotor |
| Rotor Style | perforated/vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.73
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 5.895 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 789 mm |
| Wheel Sided Joint Diameter | 71.9 mm |
| Transmission-side joint diameter | 72 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.74
Important compatibility info
| Weight | 1.877 kg |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 39 mm |
| Operating Mode | Automatic |
| Number of Ribs | 10 |
| Outer diameter | 78 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.77
Important compatibility info
| Weight | 1.110 kg |
| Outer diameter | 76.5 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 37 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.78
Important compatibility info
| Placement on Vehicle | both sides, Rear |
| Weight | 4.150 kg |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.82
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 2.750 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.89
Important compatibility info
| Weight | 1.258 kg |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 154 mm |
| Core Width | 416 mm |
| Core Depth | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.91
Important compatibility info
| Weight | 2.56 kg |
| Number of Teeth | 160 |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (34128)
- 1x Febi Water Pump, engine cooling (24360)
£114.94
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 694 mm. 681 mm |
| Width | 84 mm |
| Spring Design | Leaf spring |
| Weight | 14.6 kg |
| Number of spring leaves | 1 |
| Type | Spring Pack |
| Function | Spring Pack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.96
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023