Proud to be a UK-based company
Contact us
Important compatibility info
| Extra Description | febi Plus |
| Material | Plastic |
| Colour | Black |
| Weight | 1.058 kg |
| Additional Information | with gasket/seal |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| Width | 175 mm |
| Length | 366 mm |
| Height | 139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Weight | 14.1 kg |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Length | 1358 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Placement on Vehicle | Front Axle, from the steering gear to the 1st idler arm |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 6.4 kg |
| Current Strength | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Height | 83 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Weight | 0.94 kg |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Additional Information | with lock nut, with rubber mounts |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40164 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 9.86 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (33523)
- 1x Febi Nut (40161)
£116.56
Important compatibility info
| Number of Ribs | 6 |
| Voltage | 12 V |
| Function | Alternator |
| Belt Pulley Diameter | 54 mm |
| Weight | 5.15 kg |
| Type | Alternator |
| Alternator Charge Current | 90 A |
| Pulleys | with freewheel belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 2 |
| Operating Mode | Manual |
| Weight | 3.5 kg |
| Suction side external thread size | M12 x 1,5 |
| Internal Thread Size | M10 x 1,5 |
| Type | Tilt Pump, driver cab |
| Hole Spacing | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Weight | 1.23 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 144 |
| Timing Chain Size | G53HR |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 11 31 8 618 317 S6 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Guide, timing chain (30446)
- 1x Febi Guide, timing chain (30448)
- 1x Febi Guide, timing chain (30453)
- 1x Febi Tensioner, timing chain (47638)
- 1x Febi Sprocket, crankshaft (30477)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
£116.56
Important compatibility info
| Type | Clutch Disc |
| for OE number | 1395 705 |
| Weight | 8.951 kg |
| Function | Clutch Disc |
| Outer diameter | 420 mm |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Pipe Diameter | 30 mm |
| Function | Centre Rod Assembly |
| Length | 1080 mm |
| Rod/Strut | Guide Rod |
| Adjustable | Adjustable on one side |
| Weight | 5.8 kg |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Pipe Diameter | 50 mm |
| Adjustable | Adjustable on one side |
| Length | 997 mm |
| Brake Type | Disc Brake |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Cone Size | 30 mm |
| Weight | 9.250 kg |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Weight | 4.12 kg |
| Outer diameter | 194 mm |
| Thickness | 86 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 8 |
| Parameter | 4PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Function | Oil Pump |
| Weight | 1.369 kg |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Length | 926 mm |
| Width | 68 mm |
| Thickness | 100 mm |
| Rod/Strut | Guide Rod |
| External Thread Size | M24 x 1,5 |
| Cone Size | 27 mm |
| Pipe Diameter | 46 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| Weight | 9.72 kg |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Weight | 2.3 kg |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 52 mm |
| Weight | 5.12 kg |
| Current Strength | 70 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Thickness | 125 mm |
| Function | Clutch, radiator fan |
| Weight | 2.117 kg |
| Outer diameter | 165 mm |
| for OE number | 904 200 08 22 |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Additional Information | with gaskets/seals |
| Weight | 1.006 kg |
| Function | EGR Valve |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Function | Cable Pull, manual transmission |
| Inner length 1 | 722 mm |
| Type | Cable Pull, manual transmission |
| Weight | 1.258 kg |
| Inner length 2 | 742 mm |
| Outer length 1 | 990 mm |
| Outer length 2 | 1010 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Function | Timing Belt Kit |
| Weight | 1.59 kg |
| Type | Timing Belt Kit |
| Number of Teeth | 122. 81 |
| Replaces | 27498 |
Additional Information
Technical Information
The diamond-coated washer included in this kit has to be used to replace the formerly fitted washer.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (22738)
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (11559)
- 1x Febi Tensioner Pulley, timing belt (11561)
- 1x Febi Tensioner Pulley, timing belt (14734)
- 1x Febi Washer, crankshaft pulley (31815)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178781)
£116.57
Important compatibility info
| Parameter | Typ 44 |
| Internal Thread Size | M22 x 1,5 |
| Type | Diaphragm Brake Cylinder |
| Function | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Thread | M20 x 1,5 |
| Weight | 8.7 kg |
| Stroke | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.58
Important compatibility info
| Weight | 9.6 kg |
| Placement on Vehicle | Rear Axle |
| Length | 523 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.61
Important compatibility info
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Weight | 2.700 kg |
| Number of mounting bores | 3 |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.62
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.800 kg |
| External Thread Size | M12 x 1,75 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.72
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 1.501 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.72
Important compatibility info
| Placement on Vehicle | Right, Lower |
| Weight | 2.145 kg |
| for OE number | 21810-2S900 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.75
Important compatibility info
| Type | Interior Blower |
| Function | Interior Blower |
| Weight | 1.6 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.77
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Bolt Hole Circle Diameter | 131.3 mm |
| Bore Diameter | 10.8 mm |
| External Teeth, Wheel Side | 29 |
| Weight | 12.440 kg |
| Number of mounting bores | 2 |
| External Teeth, Diff.Side | 29 |
| Min. Length | 1006 mm |
| Wheel Sided Joint Diameter | 100.4 mm |
| Transmission-side joint diameter | 94 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.77
Important compatibility info
| Outer diameter | 137 mm |
| Inner diameter | 50 mm |
| Inner diameter 1 | 12 mm |
| Function | Joint, propshaft |
| Screw length below head | 65 mm |
| Weight | 0.860 kg |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| External Thread Size | M12 x 1,5 |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (45722)
- 3x Febi Screw (09759)
- 1x Febi Assembly Kit, propshaft joint (22118)
£116.80
Important compatibility info
| Weight | 1.464 kg |
| Surface | Coated |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 130 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49583)
- 1x Febi Tensioner, timing chain (12119)
- 1x Febi Guide Rails Kit, timing chain (46414)
- 1x Febi Gear Set, engine timing (33033)
- 1x Febi Screw Set, gears (timing chain) (46415)
- 1x Febi Sleeve (46469)
- 1x Febi Gasket Kit, crankcase (46470)
£116.82
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Additional Information 2 | without screw |
| Number of Teeth | 36 |
| Weight | 0.785 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.83
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 395 mm |
| Thickness | 62 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Weight | 18.9 kg |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.86
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 395 mm |
| Thickness | 62 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Weight | 18.9 kg |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.86
Important compatibility info
| Weight | 1.370 kg |
| Outer diameter | 420 mm |
| Thickness | 74 mm |
| Inner diameter | 10.5 mm |
| Inner diameter 1 | 17.5 mm |
| Number of Wings | 7 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| for OE number | 000 200 96 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.97
Important compatibility info
| Length | 620 mm |
| Material | Steel |
| Outer diameter | 310 mm |
| Number of Connectors / Ports | 5 |
| Weight | 13.0 kg |
| Capacity | 40 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 155 mm |
| Outer diameter | 330 mm |
| Thickness | 144 mm |
| Centering Diameter | 133 mm |
| Surface | Coated |
| Number of mounting bores | 8 |
| Function | Brake Disc |
| Type | Brake Disc |
| Weight | 19.0 kg |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.11
Important compatibility info
| Weight | 12.9 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 625 mm |
| Inner diameter | 17 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.16
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 8.4 kg |
| Function | Bellow, air suspension |
| Thickness | 290 mm. 405 mm |
| Outer diameter | 227 mm. 204 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Placement on Vehicle | Rear Axle |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.16
Important compatibility info
| for OE number | 14401-RB1-003 S3 |
| Chain Type | Silent Chain, Closed chain |
| Weight | 0.858 kg |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49572)
- 1x Febi Guide, timing chain (175061)
- 1x Febi Holder, timing chain slide rail (175068)
- 1x Febi Guide, timing chain (175076)
- 1x Febi Gear/Sprocket, camshaft (175078)
- 1x Febi Sprocket, crankshaft (175065)
- 1x Febi Shaft Seal, camshaft (177678)
£117.19
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196593 |
| Weight | 9.967 kg |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.24
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Outer diameter | 228 mm. 220 mm |
| Thickness | 122 mm. 385 mm |
| Paired article numbers | 102809 |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| External Thread Size | M7 x 1, M10 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Weight | 4.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.26
Important compatibility info
| Function | Multi-circuit Protection Valve |
| Weight | 1.805 kg |
| Internal Thread Size | 7 x M22 x 1,5, 2 x M12 x 1,5 |
| Type | Multi-circuit Protection Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.27
Important compatibility info
| Weight | 2.3 kg |
| Placement on Vehicle | Upper, Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.41
Important compatibility info
| Material | Aluminium |
| Weight | 1.507 kg |
| Steering arm type | Control Arm, Triangular Control Arm (CV) |
| Placement on Vehicle | Front Axle Right, Upper |
| Additional Information 2 | with ball joint |
| Paired article numbers | 182235 |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.42
Important compatibility info
| Weight | 1.627 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.45
Important compatibility info
| Width | 50 mm |
| Type | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Weight | 9.995 kg |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bolt Hole Circle Diameter | 180 mm |
| Inner diameter | 30 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Outer diameter | 87.5 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.46
Important compatibility info
| Length | 723 mm |
| Height | 112 mm |
| Width | 326 mm |
| Material | Plastic |
| Function | Cylinder Head Cover |
| Colour | Black |
| Extra Description | febi Plus |
| Weight | 2.459 kg |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| for OE number | 11 12 1 432 928 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.49
Important compatibility info
| Weight | 1.09 kg |
| Number of Chain Links | 144 |
| Timing Chain Size | G53HR |
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain Kit |
| Replaces | 30337 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Tensioner, timing chain (29856)
- 1x Febi Guide, timing chain (29533)
- 1x Febi Guide, timing chain (29532)
- 1x Febi Sliding Rail Bolts, timing chain (48336)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Pulley Bolt (48338)
- 1x Febi Sprocket, crankshaft (30458)
£117.51
Important compatibility info
| Weight | 3.23 kg |
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 19 mm |
| Placement on Vehicle | Front Axle |
| Length | 1066 mm |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.51
Important compatibility info
| Weight | 1.422 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 55703651 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.51
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023