Important compatibility info
Additional Information 2 | with bolts/screws |
Weight | 4.542 kg |
Extra Description | febi Plus |
Type | Release Fork, clutch |
Function | Release Fork, clutch |
Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.645 kg |
Voltage | 24 V |
Number of Connectors / Ports | 5 |
Function | Wiper Motor |
Placement on Vehicle | Front |
Type | Wiper Motor |
Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Height | 130 mm |
Width | 350 mm |
Additional Information 2 | with bulbs |
Voltage | 24 V |
Inspection Tag | ADR |
Paired article numbers | 193022 |
Port / Connector type | ASS2 7 pin |
Number of Connectors / Ports | 7 |
Light Function | with indicator, with stop light, with rear fog light, with reverse light, with side marker light, with reflector (triangular), with taillight, without number plate light |
Weight | 1.17 kg |
Depth | 120 mm |
Protection Type (IP Code) | IP54 |
Type | Tail Light Assembly |
Fulfils ECE norm | R3, R6, R7, R23, R38, R91 |
Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Thread Size | M16x1,5 |
External Teeth, Wheel Side | 36 |
Weight | 6.220 kg |
Min. Length | 473 mm |
Wheel Sided Joint Diameter | 97.9 mm |
Transmission-side joint diameter | 85 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rated Power | 1 kW |
Weight | 3.2 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Wiper Linkage |
Function | Wiper Linkage |
Extra Description | febi Plus |
Weight | 4.07 kg |
Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Holes | 6 |
Weight | 0.32 kg |
Type | Solenoid Valve, shift cylinder |
Function | Solenoid Valve, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Intake Side |
Weight | 1.834 kg |
Type | Camshaft |
Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.466 kg |
Number of Holes | 6 |
Placement on Vehicle | Front |
Thickness | 12 mm |
Bolt Hole Circle Diameter | 110 mm |
Function | Joint, propshaft |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Parameter | Typ 44 |
Internal Thread Size | M22 x 1,5 |
Type | Diaphragm Brake Cylinder |
Function | Diaphragm Brake Cylinder |
Distance of fastening bolts | 120 mm |
Piston Rod Thread | M20 x 1,5 |
Weight | 8.7 kg |
Stroke | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.3 kg |
Placement on Vehicle | Rear Axle |
Length | 840 mm |
Steering arm type | Trailing Arm |
Pipe Diameter | 50 mm |
Mounting points diameter | 20 mm |
Function | Control/Trailing Arm, wheel suspension |
Internal Thread Size | M30 x 1,5 RHT |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.6 kg |
Placement on Vehicle | Rear Axle |
Length | 523 mm |
Steering arm type | Trailing Arm |
Pipe Diameter | 50 mm |
Mounting points diameter | 19 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Hydraulic |
Rotation Direction | Clockwise rotation |
Number of Connectors / Ports | 2 |
Weight | 2.700 kg |
Number of mounting bores | 3 |
Type | Hydraulic Pump, steering |
Function | Hydraulic Pump, steering |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Mounting points diameter | 12 mm. 14 mm |
Piston conrod diameter | 16 mm |
Function | Shock Absorber |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 659 mm |
Min. Length | 404 mm |
Pipe Diameter | 63.5 mm. 54 mm |
Weight | 3.345 kg |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Replaces | 20044; 20346 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.800 kg |
External Thread Size | M12 x 1,75 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 1.501 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right, Lower |
Weight | 2.145 kg |
for OE number | 21810-2S900 |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Interior Blower |
Function | Interior Blower |
Weight | 1.6 kg |
Voltage | 12 V |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information | with Split Pin |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
Bolt Hole Circle Diameter | 131.3 mm |
Bore Diameter | 10.8 mm |
External Teeth, Wheel Side | 29 |
Weight | 12.440 kg |
Number of mounting bores | 2 |
External Teeth, Diff.Side | 29 |
Min. Length | 1006 mm |
Wheel Sided Joint Diameter | 100.4 mm |
Transmission-side joint diameter | 94 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 137 mm |
Inner diameter | 50 mm |
Inner diameter 1 | 12 mm |
Function | Joint, propshaft |
Screw length below head | 65 mm |
Weight | 0.860 kg |
Extra Description | ProKit |
Type | Joint, propshaft |
External Thread Size | M12 x 1,5 |
Number of Holes | 6 |
Additional Information 2 | with bolts/screws, with washers |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (45722)
- 3x Febi Screw (09759)
- 1x Febi Assembly Kit, propshaft joint (22118)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023