Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Weight | 4.0 kg |
| Mounting points diameter | 14 mm |
| Pipe Diameter | 45 mm |
| Max. Length | 429 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Number of Connectors / Ports | 5 |
| Function | Ignition Coil |
| Weight | 1.63 kg |
| Type | Ignition Coil |
| for OE number | 078 905 104 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Weight | 0.904 kg |
| Type | Wiper Motor |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Function | Wiper Motor |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Weight | 1.57 kg |
| Seal Material | Rubber |
| Number of grooves | 6 |
| Function | Water Pump, engine cooling |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Additional Information 2 | switchable water pump |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Paired article numbers | 188146 |
| External Teeth, Wheel Side | 36 |
| Weight | 5.073 kg |
| External Teeth, Diff.Side | 28 |
| Min. Length | 627 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Type | Centre Rod Assembly |
| Weight | 11.460 kg |
| Placement on Vehicle | Front Axle |
| Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Pipe Diameter | 62 mm |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Weight | 3.9 kg |
| Pipe Diameter | 45 mm |
| Min. Length | 349 mm |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Piston Diameter | 20 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 10.290 kg |
| Length | 223 mm |
| Outer diameter | 49.5 mm. 50 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Sealing/Protective Cap (08522)
- 4x Febi Grease Nipple (01094)
- 4x Febi Circlip (03729)
- 4x Febi Lock Ring, steering knuckle (03728)
- 4x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Spacer, kingpin (15758)
- 2x Febi Bush, steering knuckle (08524)
- 4x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Kingpin (03785)
- 2x Febi Bush, kingpin (03789)
- 2x Febi Spacer, kingpin (05007)
- 2x Febi Spacer, kingpin (05008)
- 2x Febi Spacer, kingpin (05009)
- 2x Febi Spacer, kingpin (05010)
- 2x Febi Spacer, kingpin (04997)
- 2x Febi Spacer, kingpin (04998)
- 2x Febi Spacer, kingpin (04999)
- 2x Febi Spacer, kingpin (05000)
- 2x Febi Spacer, kingpin (05001)
£110.62
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 3 |
| Weight | 0.06 kg |
| Type | Sensor, oil pressure |
| Function | Sensor, oil pressure |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Function | Cable Pull, manual transmission |
| Weight | 1.110 kg |
| for OE number | 81.32655.6311 |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 2845 mm |
| Outer length 1 | 3190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 50 mm |
| Weight | 5.0 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Seal Material | Metal |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Weight | 1.6 kg |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Length | 110 mm |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 58 80 |
| Width | 95 mm |
| Height | 95 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Weight | 2.229 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| Weight | 8.210 kg |
| External Teeth, Wheel Side | 40 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Thread Size | M10x1,5 |
| Transmission-side joint diameter | 93.5 mm |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 92.2 mm |
| External Teeth, Diff.Side | 31 |
| Min. Length | 548 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
| Function | Alternator |
| Weight | 5.5 kg |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Front |
| Weight | 1.946 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.63
Important compatibility info
| Weight | 5.9 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm |
| Thickness | 210 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.65
Important compatibility info
| Weight | 0.637 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Rubber/Metal |
| Paired article numbers | 106135 |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.68
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Thickness | 330 mm |
| Type | Bellow, air suspension |
| Weight | 4.0 kg |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 150 mm |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Spanner Size | 22 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Weight | 0.080 kg |
| Placement on Vehicle | before catalytic converter |
| External Thread Size | M18 x 1,5 |
| Cable Length | 370 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Additional Information | with seal rings |
| Material | Grey Cast Iron |
| Weight | 1.040 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal, Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Number of Teeth | 145 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Weight | 2.021 kg |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with fastening/mounting material |
| Water pump impeller material | Metal |
| Additional Information 2 | non-switchable water pump |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (103078)
- 1x Febi Timing Belt Kit (100790)
£110.70
Important compatibility info
| Placement on Vehicle | both sides, Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 6.597 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.76
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 6 |
| Weight | 0.03 kg |
| for OE number | 13 62 7 585 680 |
| Housing Type | without housing |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.78
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 17 mm |
| Weight | 10.5 kg |
| Rod/Strut | Guide Rod |
| Length | 449 mm |
| Pipe Diameter | 50 mm |
| Steering arm type | Trailing Arm |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.78
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.558 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
Technical Information
Not replaceable by 4G0 199 381 NF (febi 180761 / SWAG 33 10 7602).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.79
Important compatibility info
| External Thread Size | M12 x 1,75, M16 x 1,5 |
| Outer diameter | 228 mm. 238 mm |
| Thickness | 348 mm. 122 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Weight | 5.7 kg |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.80
Important compatibility info
| Surface | Coated |
| Weight | 2.63 kg |
| Number of Teeth | 160 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 03L 198 119 F S1 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (37021)
- 1x Febi Water Pump, engine cooling (36048)
£110.84
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 102 mm |
| Transmission-side joint diameter | 95.5 mm |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 29 |
| Weight | 9.280 kg |
| External Teeth, Diff.Side | 29 |
| Min. Length | 650 mm |
| Paired article numbers | 182959 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.94
Important compatibility info
| Weight | 1.8 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.96
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023