Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 6 |
| Weight | 0.03 kg |
| for OE number | 13 62 7 585 680 |
| Housing Type | without housing |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.78
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.558 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
Technical Information
Not replaceable by 4G0 199 381 NF (febi 180761 / SWAG 33 10 7602).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.79
Important compatibility info
| External Thread Size | M12 x 1,75, M16 x 1,5 |
| Outer diameter | 228 mm. 238 mm |
| Thickness | 348 mm. 122 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Weight | 5.7 kg |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.80
Important compatibility info
| Surface | Coated |
| Weight | 2.63 kg |
| Number of Teeth | 160 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 03L 198 119 F S1 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (37021)
- 1x Febi Water Pump, engine cooling (36048)
£110.84
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 102 mm |
| Transmission-side joint diameter | 95.5 mm |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 29 |
| Weight | 9.280 kg |
| External Teeth, Diff.Side | 29 |
| Min. Length | 650 mm |
| Paired article numbers | 182959 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.94
Important compatibility info
| Weight | 1.8 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.96
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Weight | 1.630 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.99
Important compatibility info
| Weight | 6.945 kg |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21302 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.01
Important compatibility info
| Extra Description | febi Plus |
| Function | Clock Spring, airbag |
| Type | Clock Spring, airbag |
| Weight | 0.197 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.08
Important compatibility info
| Weight | 5.43 kg |
| Material | Aluminium |
| Paired article numbers | 174696 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.08
Important compatibility info
| Paired article numbers | 174697 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Weight | 5.43 kg |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.08
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 144 |
| Timing Chain Size | G53HR |
| Function | Timing Chain Kit |
| Replaces | 30335 |
| Weight | 1.48 kg |
| Type | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29533)
- 1x Febi Guide, timing chain (29532)
- 1x Febi Sliding Rail Bolts, timing chain (47398)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Sprocket, crankshaft (30458)
£111.08
Important compatibility info
| Inner diameter | 18 mm |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Weight | 1.800 kg |
| Type | Hydraulic Pump, steering |
| Operating pressure to | 10 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.11
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Paired article numbers | 104660 |
| Placement on Vehicle | Right |
| Weight | 2.579 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.20
Important compatibility info
| Weight | 2.37 kg |
| Material | Cast Aluminium |
| Number of grooves | 7 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Additional Information 2 | with seal ring |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.22
Important compatibility info
| Placement on Vehicle | Front, Left |
| Weight | 4.221 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.34
Important compatibility info
| Placement on Vehicle | Front, Right |
| Weight | 4.314 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.34
Important compatibility info
| Weight | 9.0 kg |
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Outer diameter | 273 mm. 227 mm |
| Thickness | 130 mm. 480 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.35
Important compatibility info
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 31 |
| Thread Size | M24x2,0 |
| Min. Length | 1093 mm |
| External Teeth, Diff.Side | 41 |
| Weight | 13.440 kg |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 99 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.37
Important compatibility info
| Thickness | 124 mm. 519 mm |
| Outer diameter | 258 mm. 229 mm |
| Function | Bellow, air suspension |
| Placement on Vehicle | Front Axle |
| Weight | 8.0 kg |
| Type | Bellow, air suspension |
| External Thread Size | M16 x 1,5 |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.38
Important compatibility info
| for OE number | 4M0 199 371 HD |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Weight | 2.050 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.38
Important compatibility info
| Placement on Vehicle | Upper Left |
| Weight | 1.997 kg |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.39
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 24 mm |
| Brake Disc Thickness | 26 mm |
| Thickness | 50.7 mm |
| Outer diameter | 330 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 8.48 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | perforated/vented, slotted |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.45
Important compatibility info
| Rolling piston material | Plastic |
| External Thread Size | M22 x 1,5 |
| Weight | 6.43 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 250 mm. 225 mm |
| Thickness | 270 mm. 623 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.48
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 1.646 kg |
| Type | Mounting, engine |
| Placement on Vehicle | Left |
| Paired article numbers | 184874, 183939 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.54
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05021 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Weight | 4.570 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.57
Important compatibility info
| Weight | 1.789 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 134 mm |
| Outer diameter | 134 mm |
| Inner diameter | 60 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.57
Important compatibility info
| Voltage | 12 V |
| Function | Interior Blower |
| Weight | 1.1 kg |
| Type | Interior Blower |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.57
Important compatibility info
| Inner diameter | 26 mm |
| Placement on Vehicle | Rear Axle |
| Width | 133 mm |
| Outer diameter | 68 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Weight | 2.3 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.57
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.130 kg |
| Type | Master Cylinder, clutch |
| for OE number | 21 52 6 758 820 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.57
Important compatibility info
| Material | Cast Aluminium |
| Number of Teeth | 6 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Weight | 1.677 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 996 106 011 56 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.57
Important compatibility info
| Piston conrod diameter | 16 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 474 mm |
| Min. Length | 287 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Function | Shock Absorber |
| Weight | 5.6 kg |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.59
Important compatibility info
| Weight | 2.408 kg |
| Outer diameter | 157 mm |
| Thickness | 39.5 mm |
| Inner diameter | 37 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.59
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 4M0 199 371 GD |
| Number of Connectors / Ports | 2 |
| Weight | 2.020 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.60
Important compatibility info
| Type | Wiper Linkage |
| Function | Wiper Linkage |
| Extra Description | febi Plus |
| Weight | 4.07 kg |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| for OE number | 13506-26020 |
| Weight | 0.553 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 112 |
| Type | Timing Chain |
| Function | Timing Chain |
| Replaces | 182190 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 785 mm |
| Weight | 0.848 kg |
| Inner length 1 | 792 mm |
| Outer length 1 | 1015 mm |
| Outer length 2 | 1020 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Air Dryer, compressed-air system |
| Weight | 3.8 kg |
| Type | Air Dryer, compressed-air system |
| Voltage | 24 V |
| Additional Information 2 | with integrated oil separator, with dryer |
| Rated Power | 100 W |
| Cut-off Pressure | 12 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 985 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 10.600 kg |
| Cone Size | 30 mm |
| Adjustable | adjustable |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Additional Information 2 | with bearing |
| Outer diameter 1 | 52 mm |
| Outer diameter 2 | 53 mm |
| Type | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Length | 235 mm |
| Weight | 6.029 kg |
| Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (18995)
- 1x Febi Bush, steering knuckle (18990)
- 1x Febi Seal Ring, steering knuckle (18994)
- 2x Febi Seal Ring, steering knuckle (18992)
- 2x Febi Lock Ring, steering knuckle (19029)
- 2x Febi Lock Ring, steering knuckle (19224)
- 2x Febi Circlip (04687)
- 1x Febi Spacer, kingpin (19250)
- 1x Febi Spacer, kingpin (19251)
- 1x Febi Spacer, kingpin (19252)
- 1x Febi Spacer, kingpin (19253)
- 1x Febi Spacer, kingpin (19254)
- 1x Febi Spacer, kingpin (19255)
- 1x Febi Spacer, kingpin (170028)
- 1x Febi Spacer, kingpin (170029)
- 1x Febi Spacer, kingpin (170030)
- 1x Febi Bush, steering knuckle (172905)
£111.61
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 1.834 kg |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Weight | 10.985 kg |
| Placement on Vehicle | Front Axle |
| Length | 1477 mm |
| Outer diameter | 50 mm |
| Thread Length | 25 mm |
| Thread Type | with left-hand thread |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 LHT |
| External Thread Size | M24 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Outer diameter | 123 mm |
| Weight | 0.611 kg |
| Inner diameter | 115 mm |
| Function | Charge Air Hose |
| Additional Information 2 | with clamps |
| Extra Description | ProKit |
| Type | Charge Air Hose |
| Hose Length | 210 mm |
| Wall Thickness | 4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (26516)
- 2x Febi Fastening Clamp, charge air hose (39030)
£111.61
Important compatibility info
| Length | 172 mm |
| Outer diameter | 32 mm |
| Function | Repair Kit, kingpin |
| Weight | 3.3 kg |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Kingpin (29731)
- 2x Febi Bush, steering knuckle (29732)
- 2x Febi Bush, kingpin (29733)
- 2x Febi Bush, kingpin (29734)
- 4x Febi Seal Ring, steering knuckle (29735)
- 2x Febi Seal Ring, steering knuckle (29736)
- 2x Febi Seal Ring, steering knuckle (29737)
- 2x Febi Spacer, kingpin (29740)
- 2x Febi Spacer, kingpin (29741)
- 2x Febi Spacer, kingpin (29742)
- 2x Febi Spacer, kingpin (29743)
£111.61
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 750 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.6 kg |
| Hole Spacing | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184888 |
| Weight | 3.602 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 21 mm |
| External Thread Size | M14 x 1,5 |
| Cone Size | 16.6 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 6.220 kg |
| Min. Length | 473 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Pipe Diameter | 48 mm |
| Type | Tie Rod |
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 |
| Weight | 11.6 kg |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Function | Tie Rod |
| Length | 1675 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05023 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Weight | 5.277 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 30 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 85.95 mm |
| Thread Size | M27x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Rear Axle |
| Transmission-side joint diameter | 99.9 mm |
| Wheel Sided Joint Diameter | 94 mm |
| Min. Length | 661 mm |
| Number of mounting bores | 6 |
| Weight | 6.846 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.62
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023