Important compatibility info
Material | Aluminium |
Weight | 1.507 kg |
Steering arm type | Control Arm, Triangular Control Arm (CV) |
Placement on Vehicle | Front Axle Right, Upper |
Additional Information 2 | with ball joint |
Paired article numbers | 182235 |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 20 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 7 |
Pulleys | with belt pulley |
Alternator Charge Current | 90 A |
Belt Pulley Diameter | 55 mm |
Function | Alternator |
Weight | 6.145 kg |
Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.5 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Surface | Coated |
Number of Teeth | 129 |
Function | Water Pump & Timing Belt Kit |
Type | Water Pump & Timing Belt Kit |
Width | 25 mm |
Weight | 1.598 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (23437)
- 1x Febi Water Pump, engine cooling (24194)
Important compatibility info
Additional Information | with seal rings |
Material | Grey Cast Iron |
Weight | 1.040 kg |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Metal, Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 37 mm |
Outer diameter | 157 mm |
Thickness | 39.5 mm |
Number of Ribs | 6 |
Weight | 2.498 kg |
Parameter | 7PK |
Type | Belt Pulley, crankshaft |
Additional Information 2 | with spacer disc, with screw |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (105958)
- 1x Febi Screw (173360)
- 1x Febi Washer, crankshaft pulley (174269)
Important compatibility info
Placement on Vehicle | Rear Axle |
Mounting points diameter | 16 mm |
Function | Shock Absorber |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 667 mm |
Min. Length | 407 mm |
Pipe Diameter | 73 mm. 63 mm |
Weight | 3.41 kg |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.550 kg |
for OE number | 03G 115 105 H |
Function | Oil Pump |
Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating pressure to | 8 bar |
for OE number | 49110-3X01A |
Type | Hydraulic Pump, steering |
Function | Hydraulic Pump, steering |
Weight | 1.906 kg |
Rotation Direction | Clockwise rotation |
Operating Mode | Hydraulic |
Outer diameter | 17 mm |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.730 kg |
Function | Throttle body |
Number of Connectors / Ports | 6. 2 |
Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear |
Additional Information | with adjuster |
Paired article numbers | 197192 |
Number of Connectors / Ports | 6 |
Weight | 1.0 kg |
Type | Door Lock |
Function | Door Lock |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | Full Kit |
Weight | 1.22 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 150 |
Timing Chain Size | Z46-16 |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Additional Information | with chain tensioner, with slide rails |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. The special tool must be used for installation / removal.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48577)
- 1x Febi Tensioner, timing chain (40379)
- 1x Febi Guide, timing chain (36631)
- 1x Febi Guide, timing chain (36632)
- 1x Febi Gear/Sprocket, camshaft (104253)
- 1x Febi Bolt, camshaft gear (46364)
- 1x Febi Shaft Seal, crankshaft (38238)
- 1x Febi Pulley Bolt (32025)
- 12x Febi Screw (172940)
- 1x Febi Screw (172938)
- 2x Febi Screw (173689)
- 1x Febi Screw (173512)
Important compatibility info
Weight | 1.7 kg |
Placement on Vehicle | Rear |
Operating Mode | Pneumatic |
Pipe Diameter | 70 mm. 41 mm |
Min. Length | 217 mm |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Function | Shock Absorber, driver cab suspension |
Piston conrod diameter | 13 mm |
Max. Length | 279 mm |
External Thread Size | M12 x 1,75 |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.6 kg |
Placement on Vehicle | Rear Axle |
Length | 568 mm |
Steering arm type | Trailing Arm |
Pipe Diameter | 50 mm |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1675 mm |
Weight | 1.096 kg |
Tensile Cord Material | Polyester |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Number of Ribs | 7 |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (180079)
- 1x Febi Belt Tensioner, v-ribbed belt (100188)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (36826)
Important compatibility info
Weight | 14.1 kg |
Length | 1944 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Type | Centre Rod Assembly |
External Thread Size | M24 x 1,5 |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Starter |
Weight | 3.96 kg |
Type | Starter |
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 2.2 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 142 mm |
Weight | 0.680 kg |
Mounting bores distance | 85 mm |
Fill Medium | Mineral Oil |
Type | Shift Cylinder |
Function | Shift Cylinder |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Fill Medium | Brake Fluid |
Function | Clutch Booster |
Weight | 2.934 kg |
Type | Clutch Booster |
Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Pump |
Weight | 1.325 kg |
Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023