Proud to be a UK-based company
Contact us
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 11.16 kg |
| Rim Hole Number | 10 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 365 mm |
| Thickness | 71.6 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71.1 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.26
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| External Thread Size | 1/4 " 18 NPT, 1/2 " 13 UNC, 3/8 " 16 UNC |
| Outer diameter | 160 mm |
| Thickness | 352 mm. 165 mm |
| Weight | 2.58 kg |
| Type | Bellow, air suspension |
| Rolling piston material | Plastic |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.27
Important compatibility info
| Function | Hydraulic Pump, steering |
| Weight | 1.57 kg |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.29
Important compatibility info
| Function | Steering Column Switch |
| Type | Steering Column Switch |
| Combi Switch Function | with wipe-wash function, with rear wipe-wash function, with radio control function |
| Weight | 0.253 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.30
Important compatibility info
| Weight | 0.12 kg |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.30
Important compatibility info
| Weight | 1.1 kg |
| Width of castor bearing surface | 26.5 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.31
Important compatibility info
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 169 mm |
| Thickness | 495 mm. 235 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5 |
| Weight | 7.4 kg |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.33
Important compatibility info
| Weight | 3.64 kg |
| Max. Length | 548 mm |
| Min. Length | 341 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Function | Shock Absorber |
| Pipe Diameter | 63.5 mm. 54 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20136 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.35
Important compatibility info
| Weight | 6.8 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 704 mm |
| Min. Length | 442 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20045 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.35
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 4.7 kg |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Pipe Diameter | 66 mm. 59 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 802 mm |
| Min. Length | 483 mm |
| Replaces | 20546 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.35
Important compatibility info
| Placement on Vehicle | Left, Upper |
| Weight | 3.832 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.36
Important compatibility info
| Extra Description | febi Plus |
| Function | Fitting, intake manifold |
| Type | Fitting, intake manifold |
| Weight | 3.593 kg |
| Material | Plastic |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.37
Important compatibility info
| Additional Information | with coolant level sensor |
| Material | Plastic |
| Additional Information 2 | with lid |
| Weight | 1.17 kg |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.37
Important compatibility info
| Weight | 3.32 kg |
| Placement on Vehicle | Front Axle |
| Length | 1035 mm |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | without coupling rod |
| Stabiliser Diameter | 23.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (45304)
- 4x Febi Fastening Bolt, stabiliser bar (45305)
£112.40
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 28 |
| Min. Length | 622 mm |
| Type | Drive Shaft |
| Weight | 8.250 kg |
| Thread Size | M22x1,5 |
| Paired article numbers | 193517 |
| External Teeth, Diff.Side | 24 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.42
Important compatibility info
| Function | Mounting, engine |
| Weight | 1.036 kg |
| Placement on Vehicle | Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.46
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
| Weight | 0.189 kg |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.QV |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.49
Important compatibility info
| Material | Steel |
| Length | 743 mm |
| Number of Connectors / Ports | 6 |
| Weight | 12.9 kg |
| Capacity | 40 l |
| Operating Pressure | 15 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 276 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.52
Important compatibility info
| Length | 609 mm |
| Material | Steel |
| Outer diameter | 300 mm |
| Number of Connectors / Ports | 7 |
| Weight | 10.4 kg |
| Capacity | 36 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.52
Important compatibility info
| Filter type | Activated Carbon Filter, High efficiency air filter (HEPA) |
| Height | 31 mm |
| Weight | 1.290 kg |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Length | 1022 mm |
| Width | 318 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.53
Important compatibility info
| Additional Information | with piston |
| Rolling piston material | Steel |
| Weight | 12.0 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| External Thread Size | M12 x 1,75, M22 x 1,5, M16 x 2 |
| Thickness | 690 mm. 385 mm |
| Outer diameter | 257 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.54
Important compatibility info
| Weight | 1.088 kg |
| Length | 1060 mm |
| Width | 238 mm |
| Material | Metal, FPM (fluoride rubber) |
| Thickness | 1.3 mm |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.56
Important compatibility info
| Additional Information | with gasket/seal |
| for OE number | 03L 128 063 T |
| Weight | 0.649 kg |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.56
Important compatibility info
| Material | Grey Cast Iron |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Weight | 9.270 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.58
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Function | EGR Valve |
| Weight | 0.608 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Weight | 1.451 kg |
| Placement on Vehicle | Exhaust Side |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Mounting points diameter | 14 mm. 35 mm |
| Pipe Diameter | 45 mm |
| Placement on Vehicle | Front |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Weight | 3.8 kg |
| Min. Length | 103 mm |
| Max. Length | 362 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 50 mm |
| Weight | 5.99 kg |
| Current Strength | 90 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Length | 160 mm |
| Outer diameter | 160 mm |
| Thickness | 35 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Weight | 1.444 kg |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101778)
- 3x Febi Screw (109456)
- 4x Febi Screw (109454)
- 4x Febi Nut (19104)
£112.60
Important compatibility info
| Weight | 3.0 kg |
| Length | 520 mm |
| Height | 210 mm |
| Width | 390 mm |
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Fill quantity | 12 l |
| Extra Description | ProKit |
| Opening pressure | 120 kPa |
| Type | Expansion Tank, coolant |
| Additional Information | with lids, with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023