Important compatibility info
Material | AEM (Ethylene Acrylate Rubber) |
Type | Gasket Set, cylinder head cover |
Function | Gasket Set, cylinder head cover |
Weight | 0.47 kg |
Number of screws | 18 |
for OE number | 51.03905.0177 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, kingpin |
Length | 222.5 mm |
Outer diameter | 50 mm |
Paired article numbers | 11403 |
Weight | 4.2 kg |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information 2 | without bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 1x Febi Seal Ring, steering knuckle (05868)
- 2x Febi Seal Ring, steering knuckle (15795)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (03727)
- 1x Febi Spacer, kingpin (15797)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with screw |
Thread Size | M10x1,5 |
External Teeth, Wheel Side | 40 |
Weight | 8.584 kg |
External Teeth, Diff.Side | 31 |
Min. Length | 580 mm |
Wheel Sided Joint Diameter | 102.8 mm |
Transmission-side joint diameter | 93.5 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.272 kg |
Type | Valve Plate, air compressor |
Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.051 kg |
Housing Type | without housing |
Material | Plastic |
Colour | Black |
Number of Connectors / Ports | 5 |
Function | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without screw |
Placement on Vehicle | Intake Side |
Number of Teeth | 38 |
Weight | 1.546 kg |
Type | Camshaft Adjuster |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 196 mm |
Number of Connectors / Ports | 4 |
Function | Air Suspension Valve |
Weight | 0.82 kg |
Internal Thread Size | M16 x 1,5 |
Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1120 mm |
Material | Steel |
Outer diameter | 276 mm |
Number of Connectors / Ports | 4 |
Weight | 16.4 kg |
Capacity | 60 l |
Operating Pressure | 15.5 bar |
Type | Air Tank, compressed-air system |
Function | Air Tank, compressed-air system |
Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.900 kg |
Fill Medium | Brake Fluid |
Type | Clutch Booster |
Function | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.054 kg |
Voltage | 12 V |
Pulleys | with belt pulley |
Alternator Charge Current | 124 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Fitting, intake manifold |
Type | Fitting, intake manifold |
Weight | 1.820 kg |
Number of Connectors / Ports | 4 |
Colour | Black |
Material | Plastic |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.940 kg |
Length | 537 mm |
Width | 377 mm |
Material | PP (Polypropylene) |
Thickness | 219 mm |
Function | Expansion Tank, coolant |
Extra Description | ProKit |
Type | Expansion Tank, coolant |
Number of Connectors / Ports | 2 |
Additional Information 2 | with lid |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 155 mm. 280 mm |
Thickness | 155 mm. 310 mm |
Function | Bellow, air suspension |
Weight | 8.5 kg |
Port / Connector type | Voss 232 |
External Thread Size | M16 x 1,5, M24 x 1,5 |
Type | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Additional Information 2 | without sensor |
Weight | 0.148 kg |
Colour | Black |
Number of Connectors / Ports | 4. 6 |
Extra Description | febi Plus |
Function | Clock Spring, airbag |
Type | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Type | Oil Pressure |
Placement on Vehicle | Front Axle |
External Thread Size | M14 x 1,5 |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 4.3 kg |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Max. Length | 753 mm |
Min. Length | 443 mm |
Pipe Diameter | 63 mm. 55 mm |
Function | Shock Absorber |
Type | Shock Absorber |
Piston conrod diameter | 14 mm |
Mounting points diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 503 mm |
Transmission Type | Automatic Transmission |
Filter type | Screen Filter |
Function | Hydraulic Filter, automatic transmission |
Width | 339 mm |
Extra Description | febi Plus |
Height | 46 mm |
Weight | 1.38 kg |
Type | Hydraulic Filter, automatic transmission |
Additional Information | Oil sump with permanently integrated filter element |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 7 |
Length | 1753 mm |
Width | 30 mm |
Operating Mode | Automatic |
Function | V-Ribbed Belt Set |
Weight | 1.097 kg |
Units / Pulleys | incl. deflection pulley |
Outer diameter | 70 mm |
Track rollers material | Metal |
Extra Description | ProKit |
Type | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information | with belt tensioner for V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Tensioner, v-ribbed belt (40126)
- 1x Febi V-Ribbed Belt (29033)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (40127)
Important compatibility info
Weight | 0.556 kg |
Type | Oil Pump |
Internal Thread Size | M6 x 1 |
Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.912 kg |
Placement on Vehicle | Front Axle |
Function | Stabiliser Bar, suspension |
Extra Description | ProKit |
Stabiliser Diameter | 25.5 mm |
Additional Information | with rubber mounts |
Type | Stabiliser Bar, suspension |
Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171018)
- 2x Febi Link/Coupling Rod, stabiliser bar (36043)
- 4x Febi Nut, stabiliser bar (22264)
- 4x Febi Screw (45756)
Important compatibility info
Extra Description | febi Plus |
Additional Information 2 | without pressure sensor |
Housing material | Aluminium |
Weight | 1.57 kg |
Function | Housing, fuel filter |
Type | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023