Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 49 mm |
| Weight | 4.52 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Weight | 1.451 kg |
| Placement on Vehicle | Exhaust Side |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Weight | 10.78 kg |
| Material | Grey Cast Iron |
| Number of Wings | 12 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Replaces | 03584 |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 80 mm |
| Outer diameter | 133 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 25 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 2.1 kg |
| Additional Information | with fastening/mounting material |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Weight | 5.5 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Function | EGR Valve |
| Weight | 0.608 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| for OE number | 03C 109 158 H S3 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Weight | 0.754 kg |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (105796)
- 1x Febi Tensioner, timing chain (36484)
- 1x Febi Guide, timing chain (174912)
- 1x Febi Guide, timing chain (173674)
£112.60
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Weight | 2.972 kg |
| Placement on Vehicle | Rear Axle Right |
| Function | Wheel Bearing Kit |
| Width | 60 mm |
| Outer diameter | 72 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Type | Wheel Bearing Kit |
| Inner diameter | 26 mm |
| Paired article numbers | 179850 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Weight | 10.2 kg |
| Placement on Vehicle | Front Axle |
| Length | 532 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Mounting points diameter | 14 mm. 35 mm |
| Pipe Diameter | 45 mm |
| Placement on Vehicle | Front |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Weight | 3.8 kg |
| Min. Length | 103 mm |
| Max. Length | 362 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Length | 160 mm |
| Outer diameter | 160 mm |
| Thickness | 35 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Weight | 1.444 kg |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101778)
- 3x Febi Screw (109456)
- 4x Febi Screw (109454)
- 4x Febi Nut (19104)
£112.60
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M16x1,5 |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 5.684 kg |
| Number of mounting bores | 6 |
| Min. Length | 472 mm |
| Wheel Sided Joint Diameter | 89.5 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Weight | 1.97 kg |
| Number of Teeth | 63 |
| Function | Gear, air compressor |
| Type | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 50 mm |
| Weight | 5.99 kg |
| Current Strength | 90 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Additional Information | with lids |
| Fill quantity | 11.4 l |
| Weight | 2.743 kg |
| Length | 590 mm |
| Width | 230 mm |
| Thickness | 150 mm |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 101.6 mm |
| Outer diameter | 92.2 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 35 mm |
| Weight | 3.482 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Width | 60 mm |
| Inner diameter | 26 mm |
| Outer diameter | 72 mm |
| Paired article numbers | 179849 |
| Weight | 2.972 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.60
Important compatibility info
| Additional Information | with fastening/mounting material |
| Weight | 2.463 kg |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Water pump impeller material | Metal |
| Number of Wings | 4 |
| Material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Replaces | 10647; 12367 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.61
Important compatibility info
| Weight | 0.574 kg |
| Additional Information 2 | with Temperature Switch |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 87 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.61
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rotor Style | Vented |
| Surface | Coated |
| Brake Disc Thickness | 30 mm |
| Weight | 10.9 kg |
| Type | Brake Disc Rotor |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Outer diameter | 335 mm |
| Thickness | 45 mm |
| Centering Diameter | 67 mm |
| Number of mounting bores | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£112.61
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023