Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.154 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186663, 186735 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.71
Important compatibility info
| Belt Pulley Diameter | 56 mm |
| for OE number | 028 903 028 DX |
| Alternator Charge Current | 90 A |
| Function | Alternator |
| Type | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Weight | 5.6 kg |
| Pulleys | with freewheel belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.72
Important compatibility info
| Weight | 6.47 kg |
| Material | Grey Cast Iron |
| Number of Wings | 11 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| for OE number | 51.06500.6432 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.76
Important compatibility info
| External Teeth, Diff.Side | 22 |
| Min. Length | 605 mm |
| Thread Size | M20x1,5 |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Wheel Sided Joint Diameter | 76.4 mm |
| Transmission-side joint diameter | 76 mm |
| Weight | 4.680 kg |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.84
Important compatibility info
| External Thread Size | M16 x 2, M10 x 1,5, M22 x 1,5 |
| Weight | 6.25 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 191 mm |
| Thickness | 194 mm. 600 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.87
Important compatibility info
| Additional Information | with gaskets/seals, with oil filter, with oil cooler |
| Weight | 1.5 kg |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.87
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.512 kg |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.92
Important compatibility info
| Weight | 0.19 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.95
Important compatibility info
| Weight | 8.7 kg |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 104.5 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 52.3 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.97
Important compatibility info
| Width | 23 mm |
| Number of Teeth | 150 |
| Surface | Coated |
| Water pump impeller material | Plastic |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Weight | 1.401 kg |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173220)
- 1x Febi Water Pump, engine cooling (15900)
£118.99
Important compatibility info
| Outer diameter | 73 mm |
| Weight | 3.520 kg |
| Bearing Type | Tapered Roller Bearing |
| Width | 55 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 40 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.99
Important compatibility info
| Weight | 8.38 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Inner Length | 606 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 690 mm |
| Outer diameter | 42 mm |
| Pipe Diameter | 42 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.01
Important compatibility info
| Additional Information | with rubber mounts |
| for OE number | 204 326 04 65 S1 |
| Function | Stabiliser Bar, suspension |
| Placement on Vehicle | Rear Axle |
| Stabiliser Diameter | 16 mm |
| Type | Stabiliser Bar, suspension |
| Weight | 4.41 kg |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171135)
- 1x Febi Link/Coupling Rod, stabiliser bar (29695)
- 1x Febi Link/Coupling Rod, stabiliser bar (29694)
- 2x Febi Nut (06859)
£119.01
Important compatibility info
| Placement on Vehicle | steered leading axle |
| Outer diameter | 228 mm. 197 mm |
| Thickness | 193 mm. 493 mm |
| Function | Bellow, air suspension |
| Weight | 7.3 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.01
Important compatibility info
| Weight | 0.102 kg |
| Type | Oxygen Sensor |
| Number of circuits | 4 |
| Cable Length | 625 mm |
| Lambda Sensor | Heated |
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.02
Important compatibility info
| Extra Description | febi Plus |
| Heating / Cooling | with jiggle pin |
| Weight | 2.022 kg |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gasket/seal |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 32 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Outer diameter 2 | 150 mm |
| Outer diameter 1 | 70 mm |
| Function | Wheel Bearing Kit |
| Outer diameter | 92 mm |
| Width | 54 mm |
| Additional Information | with fastening/mounting material |
| Bearing Type | Angular Ball Bearing |
| Weight | 3.535 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.07
Important compatibility info
| Rolling piston material | Plastic |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 201 mm |
| Thickness | 650 mm. 400 mm |
| Weight | 6.7 kg |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M22 x 1,5, M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.14
Important compatibility info
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 960 241 97 13 |
| Placement on Vehicle | Front |
| Weight | 6.635 kg |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.14
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Weight | 9.5 kg |
| Thickness | 192 mm. 526 mm |
| Outer diameter | 228 mm. 249 mm |
| Placement on Vehicle | Front Axle, non-steered leading axle |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023