Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.3 kg |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.56
Important compatibility info
| Function | Timing Belt Kit |
| Weight | 1.59 kg |
| Type | Timing Belt Kit |
| Number of Teeth | 122. 81 |
| Replaces | 27498 |
Additional Information
Technical Information
The diamond-coated washer included in this kit has to be used to replace the formerly fitted washer.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (22738)
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (11559)
- 1x Febi Tensioner Pulley, timing belt (11561)
- 1x Febi Tensioner Pulley, timing belt (14734)
- 1x Febi Washer, crankshaft pulley (31815)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178781)
£116.57
Important compatibility info
| Parameter | Typ 44 |
| Internal Thread Size | M22 x 1,5 |
| Type | Diaphragm Brake Cylinder |
| Function | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Thread | M20 x 1,5 |
| Weight | 8.7 kg |
| Stroke | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.58
Important compatibility info
| Weight | 9.6 kg |
| Placement on Vehicle | Rear Axle |
| Length | 523 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.61
Important compatibility info
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Weight | 2.700 kg |
| Number of mounting bores | 3 |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.62
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 1.501 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.72
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.800 kg |
| External Thread Size | M12 x 1,75 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.72
Important compatibility info
| Placement on Vehicle | Right, Lower |
| Weight | 2.145 kg |
| for OE number | 21810-2S900 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.75
Important compatibility info
| Type | Interior Blower |
| Function | Interior Blower |
| Weight | 1.6 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.77
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Bolt Hole Circle Diameter | 131.3 mm |
| Bore Diameter | 10.8 mm |
| External Teeth, Wheel Side | 29 |
| Weight | 12.440 kg |
| Number of mounting bores | 2 |
| External Teeth, Diff.Side | 29 |
| Min. Length | 1006 mm |
| Wheel Sided Joint Diameter | 100.4 mm |
| Transmission-side joint diameter | 94 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.77
Important compatibility info
| Outer diameter | 137 mm |
| Inner diameter | 50 mm |
| Inner diameter 1 | 12 mm |
| Function | Joint, propshaft |
| Screw length below head | 65 mm |
| Weight | 0.860 kg |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| External Thread Size | M12 x 1,5 |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (45722)
- 3x Febi Screw (09759)
- 1x Febi Assembly Kit, propshaft joint (22118)
£116.80
Important compatibility info
| Weight | 1.464 kg |
| Surface | Coated |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 130 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49583)
- 1x Febi Tensioner, timing chain (12119)
- 1x Febi Guide Rails Kit, timing chain (46414)
- 1x Febi Gear Set, engine timing (33033)
- 1x Febi Screw Set, gears (timing chain) (46415)
- 1x Febi Sleeve (46469)
- 1x Febi Gasket Kit, crankcase (46470)
£116.82
Important compatibility info
| Function | Timing Belt Kit |
| Weight | 1.500 kg |
| Type | Timing Belt Kit |
| Number of Teeth | 122. 81 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (14732)
- 1x Febi Timing Belt (22738)
- 1x Febi Tensioner Pulley, timing belt (11561)
- 1x Febi Tensioner Pulley, timing belt (14734)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178781)
£116.86
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 395 mm |
| Thickness | 62 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Weight | 18.9 kg |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.86
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 395 mm |
| Thickness | 62 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Weight | 18.9 kg |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.86
Important compatibility info
| Weight | 1.370 kg |
| Outer diameter | 420 mm |
| Thickness | 74 mm |
| Inner diameter | 10.5 mm |
| Inner diameter 1 | 17.5 mm |
| Number of Wings | 7 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| for OE number | 000 200 96 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.97
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle |
| Weight | 12.100 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.99
Important compatibility info
| Length | 620 mm |
| Material | Steel |
| Outer diameter | 310 mm |
| Number of Connectors / Ports | 5 |
| Weight | 13.0 kg |
| Capacity | 40 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.03
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 50.8 mm |
| Outer diameter | 90 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 115 mm |
| Function | Wheel Bearing Kit |
| Weight | 3.079 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
| Outer diameter 1 | 79 mm |
| Outer diameter 2 | 139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.05
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 8.4 kg |
| Function | Bellow, air suspension |
| Thickness | 290 mm. 405 mm |
| Outer diameter | 227 mm. 204 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Placement on Vehicle | Rear Axle |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.16
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023