Important compatibility info
Placement on Vehicle | Exhaust Side |
Weight | 1.590 kg |
Type | Camshaft |
Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Number of Wings | 8 |
Weight | 3.466 kg |
Function | Water Pump, engine cooling |
Material | Grey Cast Iron |
Water pump impeller material | Grey Cast Iron |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | AEM (Ethylene Acrylate Rubber) |
Type | Gasket Set, cylinder head cover |
Function | Gasket Set, cylinder head cover |
Weight | 0.47 kg |
Number of screws | 18 |
for OE number | 51.03905.0177 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 777 mm |
Placement on Vehicle | Front Axle |
Steering arm type | Trailing Arm |
Pipe Diameter | 48 mm |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 11.4 kg |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.44 kg |
Material | Grey Cast Iron |
Function | Water Pump, engine cooling |
Seal Material | Paper, Rubber |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 109 mm |
Function | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Bolt Hole Circle Diameter | 108 mm |
Width | 136 mm |
Weight | 3.490 kg |
Inner diameter | 29 mm |
Outer diameter | 136 mm |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.39 kg |
Material | Aluminium |
Number of grooves | 8 |
Number of Wings | 5 |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Centre |
Weight | 4.500 kg |
Number of mounting bores | 4 |
Mounting points diameter | 11 mm |
Type | Manifold, exhaust system |
Function | Manifold, exhaust system |
Internal Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Material | Aluminium |
Water pump impeller material | Plastic |
Seal Material | Rubber/Metal, Rubber |
Number of Wings | 6 |
Number of Teeth | 22 |
Weight | 1.49 kg |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pressure side external thread size | M12 x 1,5 |
Type | Door Lock, driver cab |
Weight | 3.650 kg |
Thickness | 35 mm |
Width | 135.41 mm |
Length | 87.03 mm |
Placement on Vehicle | Rear |
Function | Door Lock, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 25 |
Weight | 6.574 kg |
External Teeth, Diff.Side | 27 |
Min. Length | 580 mm |
Wheel Sided Joint Diameter | 85.5 mm |
Transmission-side joint diameter | 60.4 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 840 mm |
Outer diameter | 52.0 mm |
Rod/Strut | Push Rod |
Outer thread | M27 x 1,5 mm |
Driver Position | for left-hand drive vehicles |
Weight | 9.42 kg |
Inner thread | M30 x 1,5 RHT mm |
Cone Size | 32 mm |
Pipe Diameter | 52 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Important compatibility info
Housing length | 291.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 16.5 mm |
Stroke | 214 mm |
Eject Force | 470 N |
Housing Diameter | 18 mm |
Weight | 0.2 kg |
Length | 537 mm |
Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.30 kg |
Material | Grey Cast Iron |
Number of Wings | 11 |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
for OE number | 51.06500.6515 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 5 |
Width | 37 mm |
Parameter | 6PK |
Outer diameter | 138 mm |
Inner diameter | 27 mm |
Weight | 1.57 kg |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 22 |
Rated Power | 1.8 kW |
Weight | 4.73 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.785 kg |
Rotation Direction | Clockwise rotation |
Function | Hydraulic Pump, steering |
Operating Mode | Hydraulic |
Operating pressure to | 170 bar |
Type | Hydraulic Pump, steering |
for OE number | 2 064 855 |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M26 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Placement on Vehicle | Front Axle |
Width | 115 mm |
Outer diameter | 127 mm |
Inner diameter | 68 mm |
Weight | 6.2 kg |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.500 kg |
Type | Mounting, engine |
for OE number | 222 240 61 00 |
Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Diff.Side | 22 |
Min. Length | 605 mm |
Thread Size | M20x1,5 |
Type | Drive Shaft |
External Teeth, Wheel Side | 25 |
Wheel Sided Joint Diameter | 76.4 mm |
Transmission-side joint diameter | 76 mm |
Weight | 4.680 kg |
Function | Drive Shaft |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 348 mm |
Thickness | 62.2 mm |
Brake Disc Thickness | 30 mm |
Minimum thickness | 28.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 75 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Machining | High-carbon |
Rotor Style | Internally Vented |
Weight | 12.125 kg |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 2, M10 x 1,5, M22 x 1,5 |
Weight | 6.25 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 228 mm. 191 mm |
Thickness | 194 mm. 600 mm |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Rolling piston material | Steel |
Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 141 |
Function | Water Pump & Timing Belt Kit |
Weight | 1.1 kg |
Water pump impeller material | Plastic |
Belts | with rounded tooth profile |
Type | Water Pump & Timing Belt Kit |
Additional Information | with fastening/mounting material |
for OE number | 038 109 119 D S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21720)
- 1x Febi Water Pump, engine cooling (17938)
Important compatibility info
Placement on Vehicle | Left |
Number of Connectors / Ports | 2 |
Weight | 1.150 kg |
Bearing/Mounting Type | electrically adjustable hydro mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.701 kg |
Chain Type | Duplex, with chain lock |
Number of Chain Links | 190 |
Additional Information 2 | Requires special tools for mounting |
Timing Chain Size | D67HR, D67HP |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 11.5 kg |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Pipe Diameter | 62 mm |
Cone Size | 30 mm |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Rod/Strut | Push Rod |
Length | 914 mm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Thread Size | M27x1,5 |
External Teeth, Wheel Side | 30 |
Weight | 7.044 kg |
External Teeth, Diff.Side | 27 |
Min. Length | 637 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 85 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M27x1,5 |
External Teeth, Wheel Side | 30 |
Weight | 8.796 kg |
External Teeth, Diff.Side | 27 |
Min. Length | 1020 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 84 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 4 |
Pulleys | with belt pulley |
Alternator Charge Current | 70 A |
Belt Pulley Diameter | 55 mm |
Weight | 4.60 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.645 kg |
Number of Teeth | 54 |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Type | Camshaft Adjuster |
Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (103895)
- 1x Febi Bolt, camshaft gear (103894)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023