Proud to be a UK-based company
Contact us
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Front Axle |
| Width | 115 mm |
| Outer diameter | 127 mm |
| Inner diameter | 68 mm |
| Weight | 6.2 kg |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 6.574 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 580 mm |
| Wheel Sided Joint Diameter | 85.5 mm |
| Transmission-side joint diameter | 60.4 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Type | Hydraulic Pump, steering |
| Rotation Direction | Clockwise rotation |
| Number of mounting bores | 3 |
| Weight | 3.200 kg |
| Operating Mode | Hydraulic |
| Inner diameter | 20 mm |
| Internal Thread Size | M16 x 1,5 |
| Operating pressure to | 11 bar |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Weight | 0.99 kg |
| Number of Connectors / Ports | 6 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Function | Tilt Pump, driver cab |
| Weight | 2.5 kg |
| Internal Thread Size | M10 x 1,5 |
| External Thread Size | M12 x 1,5 |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Hole Spacing | 75 mm |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Weight | 6.054 kg |
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Alternator Charge Current | 124 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 7.231 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 703 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Length | 900 mm |
| Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Weight | 14.800 kg |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 62 mm |
| Bolt / Nut Version | with ENKO® lock nut |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Function | Alternator |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 56 mm |
| Weight | 5.88 kg |
| Type | Alternator |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Weight | 2.07 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Length | 903 mm |
| Cone Size | 28.6 mm |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Weight | 10.400 kg |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Outer diameter | 44 mm |
| Additional Information 2 | with Temperature Switch |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Function | Thermostat, coolant |
| Housing Type | with housing |
| Opening Temperature | 105 °C |
| Weight | 0.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 66 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with integrated ABS sensor |
| Bolt Hole Circle Diameter | 114.3 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 3.63 kg |
| Outer diameter 1 | 60 mm |
| Outer diameter 2 | 139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Weight | 1.272 kg |
| Type | Valve Plate, air compressor |
| Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.48
Important compatibility info
| Weight | 0.051 kg |
| Housing Type | without housing |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.55
Important compatibility info
| Length | 196 mm |
| Number of Connectors / Ports | 4 |
| Function | Air Suspension Valve |
| Weight | 0.82 kg |
| Internal Thread Size | M16 x 1,5 |
| Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.68
Important compatibility info
| Length | 1120 mm |
| Material | Steel |
| Outer diameter | 276 mm |
| Number of Connectors / Ports | 4 |
| Weight | 16.4 kg |
| Capacity | 60 l |
| Operating Pressure | 15.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.69
Important compatibility info
| Fill Medium | Mineral Oil |
| Function | Clutch Booster |
| Weight | 2.738 kg |
| Type | Clutch Booster |
| Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.74
Important compatibility info
| Extra Description | febi Plus |
| Function | Fitting, intake manifold |
| Type | Fitting, intake manifold |
| Weight | 1.820 kg |
| Number of Connectors / Ports | 4 |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.77
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 155 mm. 280 mm |
| Thickness | 155 mm. 310 mm |
| Function | Bellow, air suspension |
| Weight | 8.5 kg |
| Port / Connector type | Voss 232 |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.92
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023