Important compatibility info
Length | 41 mm |
Material | Rubber/Metal |
Outer diameter | 41 mm |
Inner diameter | 12 mm |
Placement on Vehicle | Rear Axle, Rear |
Function | Mounting, control/trailing arm |
Steering arm type | for trailing arm |
Weight | 0.105 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.68 kg |
Width of castor bearing surface | 24 mm |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.27 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 130 |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Extra Description | Full Kit |
for OE number | 03C 109 158 A S8 |
Additional Information | with slide rails, with chain tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (36484)
- 1x Febi Camshaft Adjuster (45084)
- 1x Febi Guide, timing chain (36224)
- 1x Febi Guide, timing chain (36085)
- 1x Febi Screw (101125)
- 1x Febi Bolt, camshaft gear (46364)
- 1x Febi Quill, cylinder head (101129)
- 2x Febi Screw (101128)
- 4x Febi Sliding Rail Bolts, timing chain (101126)
- 1x Febi Gear/Sprocket, camshaft (105997)
- 1x Febi Sprocket, crankshaft (107818)
- 1x Febi Pulley Bolt (106509)
- 1x Febi Gasket, timing case cover (102422)
- 2x Febi Gasket, timing case (106575)
- 1x Febi Shaft Seal, crankshaft (32471)
Important compatibility info
Width | 157 mm |
Placement on Vehicle | Upper Left |
Function | Mounting, automatic transmission |
Length | 193 mm |
Number of Connectors / Ports | 2 |
Weight | 1.997 kg |
Type | Mounting, automatic transmission |
Bearing/Mounting Type | electrically adjustable hydro mount |
Height | 153 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178203 |
Weight | 1.67 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear |
Length | 1782 mm |
Paired article numbers | 188408 |
Weight | 0.537 kg |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Material | Plastic |
Colour | Black |
Number of Connectors / Ports | 8 |
Control Type | Button Actuation |
Function | Switch, park brake actuation |
Extra Description | febi Plus |
Type | Switch, park brake actuation |
Switch Lighting | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.65 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 37 mm |
Outer diameter | 68 mm |
Inner diameter | 39 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Bolt, ball joint (03973)
- 1x Febi Bolt, brake disc (04511)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Nut (05360)
- 1x Febi Nut (04504)
- 2x Febi Circlip (04687)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Thread Size | M24x1,5 |
Paired article numbers | 188153 |
External Teeth, Wheel Side | 29 |
Weight | 7.448 kg |
External Teeth, Diff.Side | 26 |
Min. Length | 685 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 85 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.600 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 37 mm |
Outer diameter | 68 mm |
Inner diameter | 35 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (07599)
- 2x Febi Circlip (04687)
Important compatibility info
Width | 203 mm |
Function | Brake Lining, drum brake |
Inner Brake Drum Diameter | 413 mm |
Number of Holes | 16 |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Rear Axle, Front Axle |
Type | Brake Lining, drum brake |
Number of pads | 4 |
Weight | 8.0 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.53 kg |
Placement on Vehicle | Front |
Inner diameter | 30 mm |
Type | Suspension, propshaft |
Function | Suspension, propshaft |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (05261)
Important compatibility info
Weight | 10.200 kg |
Charge Type | Exhaust Turbocharger, Turbocharger Exhaust Manifold Unit (integral manifold) |
Type | Charger, charging (supercharged/turbocharged) |
Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
Part number of recommended accessories | 191192, 192373 |
Function | Charger, charging (supercharged/turbocharged) |
Extra Description | Garrett Turbo NEW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Opening Temperature | 89 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 85 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Weight | 0.260 kg |
Additional Information | with gasket/seal |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.58 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for turbocharger (art. no.) | 186689 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.307 kg |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.141 kg |
Width | 25.4 mm |
Number of Teeth | 127 |
Belts | with rounded tooth profile |
Type | Timing Belt |
Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.146 kg |
Engine Management | Timing Chain |
Function | Guide, timing chain |
Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.01 kg |
Placement on Vehicle | Rear Axle |
Width | 25 mm |
Outer diameter | 180 mm |
Inspection Tag | ECE R90 Approved |
Function | Brake Shoe Set, parking brake |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.295 kg |
Width of castor bearing surface | 32 mm |
Width | 32 mm |
Material | Metal |
Outer diameter | 60 mm |
Type | Tensioner Pulley, timing belt |
Function | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Type | Pressure Switch, air conditioning |
Function | Pressure Switch, air conditioning |
Weight | 0.016 kg |
for OE number | 4 673 935 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Weight | 3.384 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 172561 |
Cone Size | 20 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.21 kg |
Length | 320 mm |
Height | 34 mm |
Width | 150 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Type | Splash Guard, brake disc |
Weight | 0.145 kg |
Paired article numbers | 176753 |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 1 |
Weight | 0.040 kg |
Connector Shape | rectangular |
Type | Oil Pressure Switch |
Function | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Camshaft Adjuster |
Paired article numbers | 177704 |
Weight | 1.176 kg |
Type | Camshaft Adjuster |
Extra Description | febi Plus |
Placement on Vehicle | Exhaust Side |
Number of Teeth | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, exhaust gas temperature |
Number of Connectors / Ports | 2 |
Weight | 0.070 kg |
for OE number | 2192 598 |
Cable Length | 700 mm |
Type | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.553 kg |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Function | Radiator Hose |
Inner diameter | 31 mm |
Placement on Vehicle | Lower |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.264 kg |
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (29766)
- 2x Febi Protective Cap/Bellow, shock absorber (173638)
Important compatibility info
Weight | 0.052 kg |
Placement on Vehicle | Front Axle |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with valve cover gasket |
Weight | 0.02 kg |
Material | Rubber |
Function | Gasket Set, cylinder head cover |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (15196)
- 1x Febi Gasket Set, cylinder head cover (15192)
Important compatibility info
Weight | 1.3 kg |
Placement on Vehicle | Front Axle |
Length | 131.4 mm |
Width | 54.7 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.8 mm |
Function | Brake Pad Set, disc brake |
Model | CITY CIVIC JAZZ LOGO |
Manufacturer | HONDA |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.87 kg |
Placement on Vehicle | Rear Axle |
Length | 102 mm |
Width | 46 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.6 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.68 kg |
Type | Dosing Module, urea injection |
Function | Dosing Module, urea injection |
Extra Description | febi Plus |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 7.550 kg |
Paired article numbers | 174692 |
Steering arm type | Control Arm |
Inner diameter | 16 mm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Camshaft Adjuster |
Weight | 0.609 kg |
Extra Description | febi Plus |
Function | Camshaft Adjuster |
Number of Teeth | 46 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 22.5 mm |
Material | Rubber |
Outer diameter | 32.5 mm |
Inner diameter | 10 mm |
Weight | 0.015 kg |
Function | Bushing, stabiliser coupling rod |
Type | Bushing, stabiliser coupling rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.050 kg |
Filter type | Filter Insert |
Inner diameter | 21 mm |
Outer diameter | 47 mm |
Gasket inner diameter | 54.2 mm |
Gasket outer diameter | 62.2 mm |
Function | Oil Filter |
Type | Oil Filter |
Height | 161 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 65 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Weight | 0.75 kg |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.173 kg |
Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
Outer diameter | 37 mm. 23 mm |
Thickness | 50 mm |
Inner diameter | 10 mm |
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.06 kg |
Material | Cast Aluminium |
Number of Teeth | 29 |
Number of Wings | 5 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.097 kg |
Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 44 mm. 25 mm |
Thickness | 46 mm |
Inner diameter | 12 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.66 kg |
Placement on Vehicle | Front Axle Right |
Length | 249 mm |
Paired article numbers | 29610 |
Rod/Strut | Suspension Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,5 |
Additional Information | with nuts |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.03 kg |
Length | 46 mm |
Inner diameter | 2.48 mm |
Spanner Size | 24 |
Colour Coding | Red |
Function | Oil Pressure Switch |
Screw length below head | 12 mm |
Switch point from | 2.3 bar |
Switch point to | 2.7 bar |
Number of Connectors / Ports | 1 |
External Thread Size | M10 x 1 |
Type | Oil Pressure Switch |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Weight | 0.622 kg |
Type | Ball Joint |
Function | Ball Joint |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 395 mm |
Weight | 0.44 kg |
Height | 60 mm |
Width | 185 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Outer diameter | 110 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.367 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 28 mm |
Inner diameter | 15 mm |
Mounting points diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Manufacturer Restriction | UFI |
Function | Fuel filter |
Seal Diameter | 74 mm |
Filter type | Filter Insert |
Inner diameter | 11 mm |
Outer diameter | 78 mm |
Height | 137 mm |
Type | Fuel filter |
Weight | 0.166 kg |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.420 kg |
External Thread Size | M6 x 1, M26 x 1,5 |
Internal Thread Size | M12 x 1,5 |
Function | Breather Valve |
Type | Breather Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023