Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 777 mm |
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 11.4 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Additional Information | with fastening/mounting material |
| Number of Wings | 8 |
| Weight | 3.466 kg |
| Function | Water Pump, engine cooling |
| Material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Placement on Vehicle | Centre |
| Weight | 4.500 kg |
| Number of mounting bores | 4 |
| Mounting points diameter | 11 mm |
| Type | Manifold, exhaust system |
| Function | Manifold, exhaust system |
| Internal Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.48
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.500 kg |
| Type | Mounting, engine |
| for OE number | 222 240 61 00 |
| Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.49
Important compatibility info
| External Teeth, Diff.Side | 22 |
| Min. Length | 605 mm |
| Thread Size | M20x1,5 |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 25 |
| Wheel Sided Joint Diameter | 76.4 mm |
| Transmission-side joint diameter | 76 mm |
| Weight | 4.680 kg |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.51
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 348 mm |
| Thickness | 62.2 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Machining | High-carbon |
| Rotor Style | Internally Vented |
| Weight | 12.125 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.53
Important compatibility info
| External Thread Size | M16 x 2, M10 x 1,5, M22 x 1,5 |
| Weight | 6.25 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 191 mm |
| Thickness | 194 mm. 600 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.54
Important compatibility info
| Weight | 1.701 kg |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 190 |
| Additional Information 2 | Requires special tools for mounting |
| Timing Chain Size | D67HR, D67HP |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.57
Important compatibility info
| Number of Teeth | 141 |
| Function | Water Pump & Timing Belt Kit |
| Weight | 1.1 kg |
| Water pump impeller material | Plastic |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with fastening/mounting material |
| for OE number | 038 109 119 D S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21720)
- 1x Febi Water Pump, engine cooling (17938)
£124.57
Important compatibility info
| Placement on Vehicle | Left |
| Number of Connectors / Ports | 2 |
| Weight | 1.150 kg |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.57
Important compatibility info
| Weight | 11.5 kg |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 62 mm |
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Length | 914 mm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.57
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 7.044 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 637 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.58
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 8.796 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 1020 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.58
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 4.60 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.59
Important compatibility info
| Weight | 0.645 kg |
| Number of Teeth | 54 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side, Exhaust Side |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (103895)
- 1x Febi Bolt, camshaft gear (103894)
£124.61
Important compatibility info
| Function | Timing Chain Kit |
| Weight | 1.150 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 108 |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (177616)
- 1x Febi Tensioner, timing chain (177343)
- 1x Febi Guide, timing chain (177339)
- 1x Febi Guide, timing chain (177340)
£124.62
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| Paired article numbers | 188158 |
| External Teeth, Wheel Side | 29 |
| Weight | 9.317 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 950 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.63
Important compatibility info
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 615 mm |
| Number of Connectors / Ports | 3 |
| Weight | 0.74 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.65
Important compatibility info
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle |
| Length | 705 mm |
| Material | Steel |
| Steering arm type | Semi-trailing Arm |
| Weight | 11.550 kg |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.66
Important compatibility info
| Colour Coding | Yellow |
| Weight | 0.04 kg |
| Number of Connectors / Ports | 2 |
| Type | Injector |
| Function | Injector |
| Additional Information | with gaskets/seals |
Additional Information
Technical Information
Please compare the colour coding.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.66
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023