Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 60 mm |
| Weight | 5.6 kg |
| Current Strength | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.20
Important compatibility info
| Function | Alternator |
| Type | Alternator |
| Alternator Charge Current | 100 A |
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 57 mm |
| Weight | 5.58 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.20
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 5 |
| Belt Pulley Diameter | 54 mm |
| Weight | 7.3 kg |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.20
Important compatibility info
| Weight | 8.263 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter 1 | 170 mm |
| Width 1 | 47 mm |
| Outer diameter 2 | 157 mm |
| Width 2 | 42 mm |
| Inner diameter 1 | 110 mm |
| Inner diameter 2 | 100 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| for OE number | 942 350 39 35 S1 |
| Bearing Type | Rolling Bearing |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (23314)
- 1x Febi Wheel Bearing (45806)
- 1x Febi Shaft Seal, wheel hub (24758)
- 1x Febi Circlip (24757)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Ring, wheel hub (22842)
- 1x Febi Sensor Ring, ABS (18612)
£148.24
Important compatibility info
| Function | Timing Chain |
| Type | Timing Chain |
| Number of Chain Links | 180 |
| Chain Type | Silent Chain, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.475 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 1.3 kg |
| Paired article numbers | 177798 |
| Operating Mode | Electric |
| Additional Information | with electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Weight | 6.5 kg |
| Pulleys | with freewheel belt pulley |
| Belt Pulley Diameter | 56 mm |
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
| Alternator Charge Current | 110 A |
| Current Strength | 110 A |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| for OE number | 50 01 855 204 |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Weight | 1.298 kg |
| Outer length 1 | 3285 mm |
| Inner length 1 | 2855 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Weight | 0.936 kg |
| Placement on Vehicle | Upper, Left, Right |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 54 |
| Timing Chain Size | G80VCO |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Timing Chain (25165)
- 1x Febi Tensioner, timing chain (12510)
- 1x Febi Tensioner, timing chain (12511)
£148.24
Important compatibility info
| Weight | 15.625 kg |
| Length | 1025 mm |
| Outer diameter | 60 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 28.8 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Type | Alternator |
| Weight | 5.22 kg |
| Alternator Charge Current | 80 A |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 55 mm |
| Function | Alternator |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Type | Hydraulic Pump, steering |
| Weight | 2.515 kg |
| Function | Hydraulic Pump, steering |
| Number of Teeth | 23 |
| Operating Mode | Hydraulic |
| Internal Thread Size | M16 x 1,5 |
| Rotation Direction | Clockwise rotation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Weight | 7.57 kg |
| Belt Pulley Diameter | 77 mm |
| Alternator Charge Current | 80 A |
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Number of Ribs | 9 |
| Function | Alternator |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Function | Alternator |
| Type | Alternator |
| for OE number | 010 154 92 02 |
| Weight | 7.27 kg |
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 60 mm |
| Weight | 6.2 kg |
| Current Strength | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Outer diameter | 158 mm |
| Weight | 2.961 kg |
| Inner diameter | 38 mm |
| Width | 157 mm |
| Type | Belt Pulley, crankshaft |
| Parameter | 6 PK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.27
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter, exhaust control |
| Weight | 0.17 kg |
| Extra Description | febi Plus |
| Type | Pressure Converter, exhaust control |
| for OE number | 58 51 030 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.33
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Weight | 12.66 kg |
| Placement on Vehicle | Rear Axle |
| Pipe Diameter | 48 mm |
| Length | 531 mm |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.43
Important compatibility info
| Mounting points diameter | 6 mm |
| Function | Washer Fluid Reservoir, window cleaning |
| Fill quantity | 9.8 l |
| Length | 402 mm |
| Type | Washer Fluid Reservoir, window cleaning |
| Weight | 1.348 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.65
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 772 mm |
| Min. Length | 453 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Weight | 6.9 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.75
Important compatibility info
| Function | Steering Lock |
| Additional Information 2 | with switch |
| Weight | 0.820 kg |
| Type | Steering Lock |
| Lock System | with two keys, with lock barrel |
| Number of Connectors / Ports | 9 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.82
Important compatibility info
| Type | Bellow, air suspension |
| Weight | 6.2 kg |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Port / Connector type | Voss 232 |
| Thickness | 235 mm. 660 mm |
| Outer diameter | 258 mm. 200 mm |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M22 x 1,5, M16 x 1,5 |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.85
Important compatibility info
| Weight | 2.4 kg |
| External Thread Size | M15 x 1,5 |
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.00
Important compatibility info
| Additional Information 2 | with nut |
| Type | Drive Shaft |
| Thread Size | M22x1,5 |
| Additional Information | with axle nut |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 30 |
| Weight | 6.292 kg |
| Min. Length | 640 mm |
| Wheel Sided Joint Diameter | 78 mm |
| Transmission-side joint diameter | 82 mm |
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.09
Important compatibility info
| Function | Thermostat, coolant |
| Weight | 1.217 kg |
| Opening Temperature | 74 °C |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| Outer diameter | 66.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.13
Important compatibility info
| Paired article numbers | 48101 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Steel |
| Steering arm type | Control Arm |
| Weight | 10.71 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.19
Important compatibility info
| Weight | 1.368 kg |
| Number of Connectors / Ports | 5 |
| Ignition Coil | 4 Spark |
| Type | Ignition Coil |
| Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.19
Important compatibility info
| Weight | 5.800 kg |
| Outer diameter | 362 mm |
| Number of Teeth | 10 |
| Type | Clutch Disc |
| Function | Clutch Disc |
| for OE number | 81.30301.0529 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.19
Important compatibility info
| Alternator Charge Current | 90 A |
| Weight | 5.662 kg |
| Belt Pulley Diameter | 50 mm |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Material | Grey Cast Iron |
| Number of Wings | 5 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with lock nut, with gaskets/seals |
| Weight | 5.930 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 238 mm. 227 mm |
| Thickness | 460 mm. 260 mm |
| Weight | 5.5 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| External Thread Size | M16 x 1,5, M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 12 |
| Seal Material | Rubber/Metal, Rubber |
| Weight | 10.8 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Vehicle Equipment | for vehicles with start-stop function |
| Number of Wings | 9 |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Additional Information 2 | switchable water pump |
| Operating Mode | Vacuum-controlled |
| Weight | 2.07 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Weight | 3.56 kg |
| Paired article numbers | 08747 |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 4.95 kg |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Weight | 1.4 kg |
| Number of Wings | 7 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Weight | 8.0 kg |
| External Thread Size | M30 x 1,5 |
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm, Control Arm |
| Cone Size | 42 mm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Additional Information | with gasket/seal, with fuel sender unit |
| Function | Fuel Feed Unit |
| Weight | 0.95 kg |
| Pipe Diameter | 8 mm |
| Type | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.24
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 613 mm |
| Min. Length | 363 mm |
| Pipe Diameter | 57 mm. 50 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Weight | 3.1 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.26
Important compatibility info
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 58 mm |
| Weight | 4.400 kg |
| Type | Wheel Bearing Kit |
| Outer diameter | 115 mm |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 57.8 mm |
| Width | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.28
Important compatibility info
| Weight | 18.22 kg |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Length | 1977 mm |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.32
Important compatibility info
| Outer diameter | 260 mm. 286 mm |
| Additional Information | with piston |
| Thickness | 140 mm. 543 mm |
| External Thread Size | 3/4" - 16 UNF, 1/4" - 18 NPT, 1/2" - 13 UNC |
| Rolling piston material | Plastic |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Weight | 8.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.39
Important compatibility info
| Weight | 10.87 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 285 mm. 190 mm |
| Thickness | 558 mm. 185 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M14 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.53
Important compatibility info
| Weight | 2.0 kg |
| for OE number | 17 21 7 647 315 |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.68
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 60 mm |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| Weight | 16.960 kg |
| Length | 1726 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.73
Important compatibility info
| Weight | 23.960 kg |
| Number of hub fastening holes | 8 |
| Pitch circle diameter, clutch pressure plate | 375 mm |
| External diameter, clutch pressure plate | 395 mm |
| Running surface internal diameter | 190 mm |
| Hub external diameter | 130 mm |
| Hub internal diameter | 78 mm |
| Pitch circle diameter, hub | 105 mm |
| Function | Flywheel |
| Hub fastening hole diameter | 12.5 mm |
| Number of clutch pressure plate fastening holes | 18 |
| Number of Teeth | 133 |
| Additional Information | with starter motor sprocket |
| Type | Flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.06
Important compatibility info
| Function | Fifth Wheel Kingpin |
| Diameter | 2 Inch |
| Fulfils ECE norm | E1 R55 |
| Weight | 14.71 kg |
| Type | Fifth Wheel Kingpin |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fifth Wheel Kingpin (03437)
- 1x Febi Backplate, fifth wheel kingpin (03439)
- 8x Febi Screw (03436)
£150.07
Important compatibility info
| Weight | 5.3 kg |
| Placement on Vehicle | Right Front |
| Operating Mode | Electric |
| Paired article numbers | 105906 |
| Function | Window Regulator |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.10
Important compatibility info
| Weight | 5.3 kg |
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
| Paired article numbers | 105907 |
| Function | Window Regulator |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.10
Important compatibility info
| Weight | 0.158 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£150.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023