Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 6.6 kg |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.88
Important compatibility info
| Operating Mode | Mechanical |
| Function | Fuel Pump |
| Type | Fuel Pump |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.89
Important compatibility info
| Hole Spacing | 115 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 7.755 kg |
| Bore Diameter | 17 mm |
| Steering arm type | Control Arm, Trailing Arm |
| Length | 665 mm |
| Placement on Vehicle | Rear Axle |
| Pipe Diameter | 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.91
Important compatibility info
| Weight | 1.336 kg |
| Number of Teeth | 46 |
| Colour Coding | Green |
| Engine Management | Timing Belt |
| Function | Camshaft Adjuster |
| Additional Information 2 | with screw |
| Placement on Vehicle | Exhaust Side |
| Paired article numbers | 46118 |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (46088)
- 1x Febi Bolt, camshaft gear (46098)
- 1x Febi Tensioner, timing chain (46119)
£135.91
Important compatibility info
| Operating Mode | Hydraulic |
| Function | Hydraulic Pump, steering |
| Mounting points diameter | 9 mm |
| Number of Teeth | 18 |
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Material | Aluminium |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| Weight | 2.938 kg |
| Number of mounting bores | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.94
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 2.152 kg |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.96
Important compatibility info
| Weight | 2.974 kg |
| Width of castor bearing surface | 22 mm |
| Outer diameter | 70 mm. 76 mm. 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£135.97
Important compatibility info
| Material | Metal |
| Outer diameter | 60 mm |
| Weight | 1.273 kg |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Width | 185 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.10
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| External Thread Size | M14 x 1,5 |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 4.3 kg |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 753 mm |
| Min. Length | 443 mm |
| Pipe Diameter | 63 mm. 55 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Piston conrod diameter | 14 mm |
| Mounting points diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.11
Important compatibility info
| Weight | 5.37 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Min. Length | 292 mm |
| Max. Length | 426 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.11
Important compatibility info
| Weight | 5.6 kg |
| Pipe Diameter | 65 mm. 76 mm |
| Mounting points diameter | 30 mm. 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Max. Length | 723 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Min. Length | 450 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear Axle, 2nd rear axle, non-steered trailing axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.11
Important compatibility info
| Weight | 0.29 kg |
| Length | 105 mm |
| Outer diameter | 75 mm |
| Number of Connectors / Ports | 4 |
| Function | Mass Air Flow Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.17
Important compatibility info
| Outer diameter | 396 mm |
| Material | Steel |
| Type | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Function | Air Tank, compressed-air system |
| Weight | 20.8 kg |
| Capacity | 100 l |
| Length | 915 mm |
| Number of Connectors / Ports | 4 |
| Operating Pressure | 10 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.18
Important compatibility info
| Function | Connecting Rod |
| Type | Connecting Rod |
| Weight | 3.580 kg |
| for OE number | 51.02400.6279 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.19
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 197 mm. 258 mm |
| Thickness | 213 mm. 600 mm |
| Weight | 8.6 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.24
Important compatibility info
| Number of Connectors / Ports | 6 |
| Ignition Coil | 4 Spark |
| Type | Ignition Coil |
| Function | Ignition Coil |
| Weight | 1.58 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.32
Important compatibility info
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.748 kg |
| Bore Diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Length | 667 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.35
Important compatibility info
| Weight | 1.6 kg |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Number of Chain Links | 142 |
| Function | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Weight | 0.290 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Additional Information 2 | with gear |
| Weight | 1.822 kg |
| Type | Oil Pump |
| Function | Oil Pump |
| Number of Teeth | 41 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Weight | 0.284 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 86.0 mm |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 7.478 kg |
| External Teeth, Diff.Side | 29 |
| Min. Length | 804 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 6.4 kg |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
| for OE number | 1 708 322 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Function | Clutch, radiator fan |
| Weight | 1.157 kg |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 2.753 kg |
| for OE number | 2 374 003 |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Weight | 4.730 kg |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with bolts/screws |
| Additional Information | with clamping elements |
| Units / Pulleys | incl. deflection pulley |
| Length 1 | 1342 mm |
| Length 2 | 1526 mm |
| Number of ribs 2 | 8 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (34350)
- 1x Febi V-Ribbed Belt (40707)
- 2x Febi Belt Tensioner, v-ribbed belt (106501)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (38983)
£136.36
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Material | Grey Cast Iron |
| Weight | 10.33 kg |
| Seal Material | Rubber |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 65 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.41
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 6.83 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.45
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Length | 413 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 35 mm |
| Mounting points diameter | 15 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.0 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.50
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 61 mm |
| Outer diameter | 74 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Weight | 3.065 kg |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.63
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Weight | 8.5 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 226 mm. 150 mm |
| Thickness | 205 mm. 640 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.64
Important compatibility info
| Thread Size | M24x1,5 |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 92.3 mm |
| Paired article numbers | 183832 |
| Weight | 7.836 kg |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with axle nut |
| Min. Length | 610 mm |
| ABS Ring Diameter | 97 mm |
| External Teeth, Diff.Side | 30 |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 92.3 mm |
| External Teeth, Wheel Side | 31 |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.70
Important compatibility info
| Weight | 1.94 kg |
| Additional Information 2 | with lid |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.85
Important compatibility info
| Weight | 0.68 kg |
| Height | 100 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Function | Throttle body |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.87
Important compatibility info
| Weight | 0.31 kg |
| Type | Repair Set, retarder |
| Function | Repair Set, retarder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.89
Important compatibility info
| for OE number | 11 12 7 588 412 |
| Weight | 2.122 kg |
| Material | Plastic |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.91
Important compatibility info
| Voltage | 12 V |
| Function | Throttle body |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| for OE number | 03F 133 062 B |
| Weight | 0.847 kg |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.93
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197341 |
| Number of Connectors / Ports | 2. 5 |
| Weight | 1.5 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.13
Important compatibility info
| Placement on Vehicle | Right Front |
| Weight | 1.245 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.19
Important compatibility info
| Number of Teeth | 36 |
| Placement on Vehicle | Intake Side |
| Additional Information 2 | without screw |
| Paired article numbers | 177847 |
| Weight | 0.610 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.20
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Weight | 0.738 kg |
| Paired article numbers | 178916 |
| Additional Information 2 | without screw |
| Placement on Vehicle | Exhaust Side |
| Number of Teeth | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.20
Important compatibility info
| Weight | 2.885 kg |
| Width | 60 mm |
| Outer diameter | 172 mm |
| Inner diameter | 40 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.32
Important compatibility info
| Weight | 16.78 kg |
| Placement on Vehicle | Front Axle |
| Length | 1700 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 32 mm |
| Pipe Diameter | 52 mm |
| External Thread Size | M27 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Paired article numbers | 41745 |
| Steering arm type | Control Arm |
| Material | Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 5.62 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Weight | 13.32 kg |
| Placement on Vehicle | Front Axle |
| Length | 1645 mm |
| Width | 62 mm |
| Cone Size | 30 mm |
| Extra Description | ProKit |
| Type | Tie Rod |
| Function | Tie Rod |
| Pipe Diameter | 48 mm |
| Rod/Strut | Guide Rod |
| Thickness | 115 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Number of Ribs | 6 |
| Function | V-Ribbed Belt Set |
| Weight | 0.995 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Length | 1199 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184943)
- 1x Febi Belt Tensioner, v-ribbed belt (180827)
£137.35
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 29 mm |
| Bolt Hole Circle Diameter | 64 mm |
| Outer diameter | 136 mm |
| Thickness | 90 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 3.800 kg |
| Width | 136 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Pulleys | with belt pulley |
| Alternator Charge Current | 105 A |
| Voltage | 12 V |
| Weight | 6.57 kg |
| Function | Alternator |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Length | 108 mm |
| Height | 78 mm |
| Width | 117 mm |
| Type | Housing, fuel filter |
| Function | Housing, fuel filter |
| Weight | 0.546 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Type | Alternator |
| Alternator Charge Current | 150 A |
| Pulleys | with belt pulley |
| Function | Alternator |
| Belt Pulley Diameter | 54 mm |
| Weight | 7.2 kg |
| for OE number | 5705.GC |
| Voltage | 12 V |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023