Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 80 A |
Belt Pulley Diameter | 54 mm |
Weight | 5.9 kg |
Current Strength | 80 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with screw |
Thread Size | M10x1,5 |
External Teeth, Wheel Side | 40 |
Type | Drive Shaft |
Transmission-side joint diameter | 93.5 mm |
Wheel Sided Joint Diameter | 102.8 mm |
Weight | 11.832 kg |
External Teeth, Diff.Side | 28 |
Min. Length | 1028 mm |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Placement on Vehicle | Right |
Paired article numbers | 104398 |
Weight | 2.277 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head, air compressor |
Length | 152 mm |
Width | 140 mm |
Thickness | 64 mm |
Type | Cylinder Head, air compressor |
Weight | 2.204 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.500 kg |
Bore Diameter | 19 mm |
Placement on Vehicle | Rear Axle |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Trailing Arm |
Length | 540 mm |
Material | Steel |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.982 kg |
for OE number | 21789668 |
Inner Length | 3055 mm |
Outer Length | 3322 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 5 |
Pulleys | with belt pulley |
Alternator Charge Current | 100 A |
Belt Pulley Diameter | 54 mm |
Number of Connectors / Ports | 2 |
Weight | 6.6 kg |
Current Strength | 100 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Intake Side |
Number of Teeth | 36 |
Weight | 0.740 kg |
Type | Camshaft Adjuster |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pump Type | Mono Pump |
Number of Connectors / Ports | 2 |
Voltage | 24 V |
for OE number | 1606929 |
Type | Washer Fluid Pump, headlight cleaning / Washer Fluid Pump, window cleaning |
Function | Washer Fluid Pump, headlight cleaning / Washer Fluid Pump, window cleaning |
Weight | 0.45 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pulleys | with freewheel belt pulley |
Weight | 6.8 kg |
Type | Alternator |
Belt Pulley Diameter | 56 mm |
Alternator Charge Current | 140 A |
Function | Alternator |
Voltage | 12 V |
Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | EGR Valve |
Weight | 1.444 kg |
Type | EGR Valve |
Additional Information | with gaskets/seals |
Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with belt pulley |
Alternator Charge Current | 120 A |
Belt Pulley Diameter | 50 mm |
Weight | 6.5 kg |
Current Strength | 120 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 16 mm |
Piston conrod diameter | 16 mm |
Function | Shock Absorber |
Weight | 2.13 kg |
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 662 mm |
Min. Length | 402 mm |
Pipe Diameter | 60 mm. 50 mm |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.906 kg |
for OE number | 21789684 |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 1689 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Pipe Diameter | 50 mm |
Function | Tie Rod |
Extra Description | ProKit |
Weight | 13.53 kg |
External Thread Size | M20 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Function | Housing, fuel filter |
Additional Information 2 | with pressure sensor |
Housing material | Aluminium |
Weight | 1.56 kg |
Type | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Housing, fuel filter (179567)
- 1x Febi Sensor, oil pressure (100939)
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Cone Size | 14 mm |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.397 kg |
External Thread Size | M14 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Hub, engine cooling fan wheel |
Function | Hub, engine cooling fan wheel |
Weight | 3.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Max. Length | 760 mm |
Min. Length | 460 mm |
Pipe Diameter | 65 mm. 76 mm |
Mounting points diameter | 16 mm |
Function | Shock Absorber |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Design | Telescopic Shock Absorber |
Piston conrod diameter | 20 mm |
External Thread Size | M16 x 1,5 |
Type | Shock Absorber |
Extra Description | febi Plus |
Weight | 6.01 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Weight | 10.3 kg |
Length | 570 mm |
Inner diameter | 19 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Guide Rod |
Function | Control/Trailing Arm, wheel suspension |
Mounting points diameter | 19 mm |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, control/trailing arm (35324)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023