Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Opening Temperature | 84 °C |
| Weight | 1.151 kg |
| Outer diameter | 61.1 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Weight | 6.5 kg |
| Pulleys | with freewheel belt pulley |
| Belt Pulley Diameter | 56 mm |
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
| Alternator Charge Current | 110 A |
| Current Strength | 110 A |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Function | Cylinder Head Cover |
| Weight | 3.237 kg |
| Height | 147 mm |
| Width | 329 mm |
| Length | 697 mm |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.36
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 58 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Inner diameter | 24 mm |
| Outer diameter | 85 mm |
| Length | 1815 mm |
| Placement on Vehicle | Front Axle |
| Weight | 14.500 kg |
| Mounting points diameter | 24 mm |
| Rod/Strut | Pull Rod |
| Steering arm type | Trailing Arm |
| Hole Spacing | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.54
Important compatibility info
| Weight | 1.072 kg |
| Number of Teeth | 145 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Timing Belt (48288)
- 1x Febi Tensioner Pulley, timing belt (47604)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (181517)
£146.69
Important compatibility info
| Thread Size | M16x1,5 |
| Number of mounting bores | 6 |
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 97.8 mm |
| Transmission-side joint diameter | 109.3 mm |
| Type | Drive Shaft |
| Min. Length | 603 mm |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Weight | 7.614 kg |
| Bolt Hole Circle Diameter | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.82
Important compatibility info
| Weight | 1.810 kg |
| Width | 50 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 88 mm |
| Inner diameter | 49 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.86
Important compatibility info
| Weight | 1.250 kg |
| Width | 30 mm |
| Belts | with rounded tooth profile |
| Number of Teeth | 150 |
| Surface | Coated |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Units / Pulleys | incl. hydraulic belt tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (31725)
- 1x Febi Tensioner, timing belt (34610)
- 1x Febi Tensioner Pulley, timing belt (27004)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26982)
£146.89
Important compatibility info
| Additional Information 2 | with valves |
| Type | Bearing Bracket, camshaft |
| Weight | 0.950 kg |
| Extra Description | febi Plus |
| Function | Bearing Bracket, camshaft |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bearing Bracket, camshaft (176249)
- 2x Febi Control Valve, camshaft adjustment (180080)
- 2x Febi Central Magnet, camshaft adjustment (40198)
- 1x Febi Gasket, timing case cover (171915)
£146.89
Important compatibility info
| Paired article numbers | 176931 |
| Weight | 2.235 kg |
| Placement on Vehicle | Exhaust Side |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.97
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.7 kW |
| Weight | 3.3 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.12
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Paired article numbers | 41079 |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.15
Important compatibility info
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Type | Alternator |
| Voltage | 12 V |
| Function | Alternator |
| Alternator Charge Current | 90 A |
| Weight | 5.40 kg |
| Belt Pulley Diameter | 55 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.19
Important compatibility info
| Weight | 1.33 kg |
| Width | 44 mm |
| Inner diameter | 94 mm |
| Number of Ribs | 6. 8 |
| Outer diameter 1 | 168 mm |
| Parameter | 4PK + 6PK |
| Outer diameter 2 | 144 mm |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.20
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Weight | 1.3 kg |
| Function | EGR Valve |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.21
Important compatibility info
| Weight | 1.67 kg |
| Width of castor bearing surface | 35 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Outer diameter | 81 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Material | Grey Cast Iron |
| Number of Wings | 5 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals, with lock nut |
| Weight | 5.930 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Weight | 1.4 kg |
| Number of Wings | 7 |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 12 |
| Seal Material | Rubber/Metal, Rubber |
| Weight | 10.8 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Alternator Charge Current | 90 A |
| Weight | 5.662 kg |
| Belt Pulley Diameter | 50 mm |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| Weight | 8.584 kg |
| External Teeth, Diff.Side | 31 |
| Min. Length | 580 mm |
| Wheel Sided Joint Diameter | 102.8 mm |
| Transmission-side joint diameter | 93.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Vehicle Equipment | for vehicles with start-stop function |
| Number of Wings | 9 |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Additional Information 2 | switchable water pump |
| Operating Mode | Vacuum-controlled |
| Weight | 2.07 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Weight | 8.0 kg |
| External Thread Size | M30 x 1,5 |
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm, Control Arm |
| Cone Size | 42 mm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 4.95 kg |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Weight | 3.56 kg |
| Paired article numbers | 08747 |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Placement on Vehicle | Lower Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 28019 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 9.98 kg |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.26
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 995 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Weight | 12.500 kg |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 62 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.26
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 990 mm |
| Additional Information 2 | with crown nut |
| Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Brake Type | Disc Brake |
| Weight | 10.400 kg |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.26
Important compatibility info
| Function | Shock Absorber |
| Min. Length | 415 mm |
| Pipe Diameter | 73 mm. 64 mm |
| Weight | 6.36 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Max. Length | 650 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Piston conrod diameter | 20 mm |
| Mounting points diameter | 20 mm. 30 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.41
Important compatibility info
| Operating Mode | Mechanical |
| Function | Pump, fuel pre-supply |
| Weight | 0.821 kg |
| Length | 129 mm |
| Internal Thread Size | M16 x 1,5 |
| Type | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023