Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.662 kg |
| Additional Information 2 | with bore for oil-level sensor, with seal ring |
| Wet Sump Material | Cast Aluminium |
| External Thread Size | M12 x 1,5 |
| Length | 456 mm |
| Additional Information | with oil drain plug |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| Additionally required parts | Sealant |
| Additionally recommended article | Mounting Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.10
Important compatibility info
| Replaces | 48389 |
| Function | Timing Chain Kit |
| Number of Chain Links | 190 |
| Chain Type | Duplex, with chain lock |
| Weight | 2.436 kg |
| Type | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
| Timing Chain Size | D67HR, D67HP |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide Rails Kit, timing chain (30279)
- 1x Febi Timing Chain (25445)
- 1x Febi Tensioner, timing chain (26750)
£162.10
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 48 mm |
| Length | 860 mm |
| Weight | 8.600 kg |
| Additional Information 2 | with crown nut |
| Adjustable | Adjustable on one side |
| Extra Description | ProKit |
| Type | Tie Rod |
| Paired article numbers | 178495 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.10
Important compatibility info
| for OE number | 059 145 950 R |
| Type | Throttle body |
| Function | Throttle body |
| Voltage | 12 V |
| Operating Mode | Electric |
| Weight | 0.70 kg |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.10
Important compatibility info
| Mounting points diameter | 9 mm |
| Function | Oil Cooler, engine oil |
| Length | 252 mm |
| Height | 135 mm |
| Width | 148 mm |
| Internal Thread Size | M10 x 1,5 |
| Weight | 4.762 kg |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.10
Important compatibility info
| Weight | 0.866 kg |
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 42 |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (181070)
- 1x Febi Tensioner, timing chain (49391)
- 1x Febi Guide, timing chain (49393)
- 1x Febi Guide, timing chain (49395)
- 1x Febi Guide, timing chain (49396)
£162.21
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Front |
| Weight | 7.611 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.26
Important compatibility info
| Placement on Vehicle | Rear, Left |
| Weight | 8.276 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.27
Important compatibility info
| Weight | 5.6 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 770 mm |
| Min. Length | 466 mm |
| Pipe Diameter | 75 mm. 63 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.31
Important compatibility info
| Weight | 5.91 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 770 mm |
| Min. Length | 476 mm |
| Pipe Diameter | 73 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.36
Important compatibility info
| Weight | 0.188 kg |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Number of Connectors / Ports | 6 |
| Type | Mass Air Flow Sensor |
| for OE number | 82 00 280 065 |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.39
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 60 mm |
| Weight | 6.85 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.40
Important compatibility info
| Weight | 3.9 kg |
| Extra Description | febi Plus |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 485 mm |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 75 mm. 63 mm |
| Min. Length | 323 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.42
Important compatibility info
| Weight | 0.218 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.56
Important compatibility info
| Weight | 3.788 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.69
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Water Recirculation Pump, parking heater |
| Operating Mode | Electric |
| Weight | 0.32 kg |
| Type | Water Recirculation Pump, parking heater |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.76
Important compatibility info
| Weight | 4.8 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 748 mm |
| Min. Length | 450 mm |
| Pipe Diameter | 75 mm. 63 mm |
| Mounting points diameter | 20 mm. 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.89
Important compatibility info
| Weight | 16.4 kg |
| Placement on Vehicle | Rear Axle |
| Length | 625 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Pipe Diameter | 46 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Wishbone Angle Measurement | 49 ° |
| for OE number | 960 350 34 05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£162.91
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 48 mm |
| Weight | 7.3 kg |
| Current Strength | 140 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.05
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Weight | 0.562 kg |
| Type | Camshaft Adjuster |
| Number of Teeth | 42 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.05
Important compatibility info
| External Thread Size | M80 x 2,5 |
| Weight | 0.216 kg |
| Height | 101 mm |
| Number of Connectors / Ports | 4 |
| Type | Water Separator, fuel system |
| Function | Water Separator, fuel system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.05
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 6.6 kg |
| for OE number | 1 506 300 |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.05
Important compatibility info
| Weight | 0.715 kg |
| Function | Throttle body |
| Number of Connectors / Ports | 4 |
| Operating Mode | Electric |
| Voltage | 12 V |
| Height | 73 mm |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.05
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Number of Ribs | 6 |
| Weight | 4.5 kg |
| Voltage | 12 V |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 60 mm |
| Pulleys | with freewheel belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.05
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 6.0 kg |
| Current Strength | 70 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.05
Important compatibility info
| Length | 1269 mm |
| Cone Size | 30 mm |
| Rod/Strut | Push Rod |
| Diameter 1 | 60 mm |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Weight | 19.876 kg |
| Material | Steel |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.09
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Max. Length | 429 mm |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Weight | 3.6 kg |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Pipe Diameter | 44 mm |
| Min. Length | 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.09
Important compatibility info
| Weight | 3.232 kg |
| Additional Information 2 | with spacer plate |
| Length | 247 mm |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.09
Important compatibility info
| Weight | 3.9 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 360 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 62 mm. 45 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.09
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 7 |
| Function | Throttle body |
| Weight | 0.961 kg |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.09
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023