Important compatibility info
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Width | 64 mm |
Placement on Vehicle | Rear Axle |
Weight | 5.5 kg |
Inner diameter | 32 mm |
Outer diameter | 85 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Additional Information | with gasket/seal |
Replaces | 172491 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.303 kg |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Chain Type | Silent Chain, Closed chain |
Extra Description | Standard Medium Kit |
Number of Chain Links | 158 |
Additional Information | with slide rails, with chain tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49730)
- 1x Febi Guide, timing chain (109152)
- 1x Febi Guide, timing chain (109153)
- 1x Febi Sprocket, crankshaft (109154)
- 1x Febi Gear/Sprocket, camshaft (109155)
- 1x Febi Tensioner, timing chain (104198)
- 1x Febi Shaft Seal, crankshaft (106963)
Important compatibility info
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Weight | 3.8 kg |
Number of grooves | 8 |
Number of Wings | 7 |
Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Throttle body |
Weight | 0.682 kg |
Type | Throttle body |
Additional Information | with gasket/seal |
Voltage | 12 V |
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Height | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Quantity | 1 |
Function | Timing Chain |
Weight | 0.562 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 106 |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 15 |
Rated Power | 2.0 kW |
Weight | 4.4 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electronic |
Number of Connectors / Ports | 6 |
Weight | 0.6 kg |
Connector Shape | angular |
Type | Accelerator Pedal |
Function | Accelerator Pedal |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | Basic Short Kit |
Placement on Vehicle | Lower |
Weight | 1.221 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 82 |
Timing Chain Size | G68HRF-5 |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (180442)
- 1x Febi Tensioner, timing chain (188704)
- 1x Febi Guide, timing chain (184853)
- 1x Febi Gear, injection pump (187770)
Important compatibility info
Length | 500 mm |
Outer diameter | 55 mm |
Number of Connectors / Ports | 2 |
Stroke | 250 mm |
Mounting points diameter | 42 mm. 20 mm |
Function | Tilt Cylinder, driver cab |
Pressure side external thread size | M12 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Weight | 5.3 kg |
External Thread Size | M8 x 1,25 |
Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.6 kg |
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 664 mm |
Min. Length | 410 mm |
Pipe Diameter | 70 mm. 60 mm |
Mounting points diameter | 26 mm |
Piston conrod diameter | 16 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.246 kg |
Pulleys | with belt pulley |
Internal Thread Size | M16 x 1,5 |
Length | 125 mm |
Height | 95 mm |
Width | 128 mm |
Type | Hydraulic Pump, steering |
Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.360 kg |
Type | Gear, air compressor |
Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Weight | 5.6 kg |
Outer diameter | 88 mm |
Number of Teeth | 7 |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.4 kg |
Placement on Vehicle | Left, Upper Left |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Operating Mode | Hydraulic |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.745 kg |
Height | 76 mm |
Additional Information | with gasket/seal |
Voltage | 12 V |
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Type | Throttle body |
Function | Throttle body |
for OE number | 4E0 145 950 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.6 kg |
Outer diameter | 76 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Operating Mode | Manual |
Driver Position | for right-hand drive vehicles |
Number of Connectors / Ports | 3 |
Function | Tilt Pump, driver cab |
Weight | 2.4 kg |
Suction side external thread size | M12 x 1,5 |
Pressure side external thread size | M14 x 1,5 |
Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.89 kg |
Height | 81 mm |
Voltage | 12 V |
Operating Mode | Electric |
Number of Connectors / Ports | 7 |
Function | Throttle body |
Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 140 A |
Belt Pulley Diameter | 56 mm |
Weight | 7.15 kg |
for OE number | 36012358 |
Current Strength | 140 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Interior Blower |
Weight | 0.98 kg |
Type | Interior Blower |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023