Important compatibility info
Weight | 7.64 kg |
Function | Water Pump, engine cooling |
Number of Wings | 7 |
Material | Grey Cast Iron |
Number of Teeth | 23 |
Seal Material | Rubber |
Water pump impeller material | Grey Cast Iron |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 120 |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Weight | 0.342 kg |
Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48286)
- 1x Febi Tensioner, timing chain (101149)
- 1x Febi Guide, timing chain (107854)
- 1x Febi Guide, timing chain (107855)
- 1x Febi Gear/Sprocket, camshaft (101157)
Important compatibility info
Fill Medium | Brake Fluid |
Weight | 0.350 kg |
Type | Master Cylinder, clutch |
Function | Master Cylinder, clutch |
Bore Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 31 |
Weight | 6.806 kg |
External Teeth, Diff.Side | 27 |
Min. Length | 669 mm |
Wheel Sided Joint Diameter | 85.4 mm |
Transmission-side joint diameter | 84.6 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Paired article numbers | 183463 |
Thread Size | M16x1,5 |
Additional Information 2 | with screw |
Additional Information | with spring, with gasket/seal |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.600 kg |
for OE number | 51.08101.6363 |
Mounting points diameter | 12 mm |
Type | Manifold, exhaust system |
Function | Manifold, exhaust system |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Weight | 18.7 kg |
Length | 1800 mm |
Rod/Strut | Push Rod |
Pipe Diameter | 62 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 7 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 150 A |
Belt Pulley Diameter | 50 mm |
Weight | 6.78 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.089 kg |
Cable Length | 500 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.12 kg |
Function | Belt Pulley, crankshaft |
Parameter | 6PK |
Number of Ribs | 5 |
Outer diameter | 143 mm |
Inner diameter | 26 mm |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Recirculation Pump, parking heater |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Weight | 0.22 kg |
Type | Water Recirculation Pump, parking heater |
Replaces | 174489 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Exhaust Side |
Internal Thread Size | M10 x 1,5 |
for OE number | 0801.EZ |
Type | Camshaft |
Function | Camshaft |
Number of Teeth | 19 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 12 |
Rated Power | 2.2 kW |
Weight | 5.03 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 19.0 kg |
Length | 1784 mm |
Rod/Strut | Push Rod |
Cone Size | 27.1 mm |
Pipe Diameter | 62 mm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Type | Centre Rod Assembly |
External Thread Size | M24 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Camshaft Adjuster |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Weight | 0.947 kg |
Placement on Vehicle | Exhaust Side |
Number of Teeth | 42 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.180 kg |
Extra Description | febi Plus |
Placement on Vehicle | Intake Side |
Number of Teeth | 38 |
Engine Management | Timing Belt |
Function | Camshaft Adjuster |
Internal Thread Size | M30 x 1 |
Type | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, automatic transmission |
Weight | 1.542 kg |
Function | Mounting, automatic transmission |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Parts Set, maintenance service |
Weight | 6.278 kg |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Urea Filter (101852)
- 1x Febi Air Dryer Cartridge, compressed-air system (178819)
- 1x Febi Air Filter (49350)
- 1x Febi Filter, cabin air (17420)
- 1x Febi Fuel filter (176029)
- 1x Febi Oil Filter (35334)
- 1x Febi Screw Plug, oil sump (48401)
- 1x Febi Hydraulic Filter, steering (15761)
Important compatibility info
Voltage | 12 V |
Number of Ribs | 2 |
Pulleys | with belt pulley |
Alternator Charge Current | 80 A |
Belt Pulley Diameter | 71 mm |
Weight | 6.27 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 654 mm |
Additional Information | with rubber-metal mounts |
Steering arm type | Control Arm |
Bore Diameter | 24 mm |
Weight | 9.300 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belt Pulley Diameter | 55 mm |
Function | Alternator |
Type | Alternator |
Voltage | 12 V |
Pulleys | with belt pulley |
Weight | 5.92 kg |
Number of Ribs | 6 |
Alternator Charge Current | 110 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023