Proud to be a UK-based company
Contact us
Important compatibility info
| Extra Description | febi Plus |
| Weight | 3.24 kg |
| Placement on Vehicle | Rear |
| Function | Door Lock, driver cab |
| Type | Door Lock, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.66
Important compatibility info
| Height | 146 mm |
| Outer diameter | 108 mm |
| Inner diameter | 88 mm |
| Number of Connectors / Ports | 3 |
| Function | Water Separator, fuel system |
| Weight | 0.27 kg |
| Type | Water Separator, fuel system |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.77
Important compatibility info
| Function | Timing Chain Kit |
| Weight | 0.72 kg |
| Type | Timing Chain Kit |
| for OE number | 24321-04005 S1 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 122 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (177813)
- 1x Febi Tensioner, timing chain (179358)
- 1x Febi Guide, timing chain (179397)
- 1x Febi Guide, timing chain (179400)
£155.82
Important compatibility info
| Function | Cylinder Head Cover |
| Weight | 3.237 kg |
| Height | 147 mm |
| Width | 329 mm |
| Length | 697 mm |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.84
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| Weight | 0.041 kg |
| Number of Connectors / Ports | 5 |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.87
Important compatibility info
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Min. Length | 530 mm |
| Pipe Diameter | 80 mm. 71 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear Axle |
| Max. Length | 892 mm |
| Shock Absorber Type | Oil Pressure |
| Weight | 6.8 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20228 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.91
Important compatibility info
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Pipe Diameter | 60 mm. 70 mm |
| Mounting points diameter | 16 mm |
| Max. Length | 853 mm |
| Min. Length | 504 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| Weight | 7.9 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.91
Important compatibility info
| Weight | 5.0 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 395 mm |
| Min. Length | 275 mm |
| Pipe Diameter | 69.5 mm. 75 mm |
| Mounting points diameter | 30 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.91
Important compatibility info
| Length | 610 mm |
| Weight | 13.920 kg |
| Pipe Diameter | 50 mm |
| Placement on Vehicle | Rear Axle |
| Hole Pitch 1/ Hole Pitch 2 | 152/152 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | febi Plus |
| Steering arm type | Trailing Arm |
| Bore Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.96
Important compatibility info
| Weight | 3.478 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 153 mm |
| Thickness | 111 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Inner diameter | 38 mm |
| Width | 85 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.07
Important compatibility info
| Height | 631 mm |
| Outer diameter | 355 mm |
| Inner diameter | 139 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Weight | 4.200 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.07
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 195 |
| Weight | 2.019 kg |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Units / Pulleys | incl. tensioner pulley, incl. guide pulleys |
| for OE number | 0816.K2 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (101047)
- 1x Febi Tensioner Pulley, timing belt (29301)
- 2x Febi Deflection Pulley/Guide Pulley, timing belt (100349)
£156.12
Important compatibility info
| Number of Connectors / Ports | 2 |
| Thickness | 147 mm |
| Function | Interior Blower |
| Outer diameter | 149.5 mm |
| Weight | 1.8 kg |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.12
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Function | Oil Separator, crankcase ventilation |
| Weight | 0.636 kg |
| Additional Information | with venting hoses |
| Number of hoses | 3 |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.15
Important compatibility info
| Type | Oil Cooler, engine oil |
| Weight | 1.55 kg |
| Material | Aluminium |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.16
Important compatibility info
| Material | Plastic |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Weight | 0.36 kg |
| for OE number | 7P0 965 561 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.19
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Weight | 1.3 kg |
| Function | EGR Valve |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.21
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 564 mm |
| Min. Length | 355 mm |
| Pipe Diameter | 73 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 6.48 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.21
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 6.0 kg |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.30
Important compatibility info
| Weight | 6.170 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 135 mm |
| Outer diameter | 148 mm |
| Inner diameter | 94 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.40
Important compatibility info
| Weight | 1.26 kg |
| Outer diameter | 71 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 36 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.44
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 3.2 kg |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.45
Important compatibility info
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 723 mm |
| Min. Length | 443 mm |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Weight | 6.36 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| for OE number | 006 326 60 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.58
Important compatibility info
| Function | Stabiliser Bar, suspension |
| Stabiliser Diameter | 33 mm |
| Weight | 5.53 kg |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171136)
- 1x Febi Link/Coupling Rod, stabiliser bar (21357)
- 1x Febi Link/Coupling Rod, stabiliser bar (21358)
- 2x Febi Screw (22248)
- 4x Febi Nut (06877)
£156.65
Important compatibility info
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gaskets/seals, with lock nut |
| Weight | 11.0 kg |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.69
Important compatibility info
| Placement on Vehicle | Driver side |
| Voltage | 24 V |
| Colour | black |
| Number of Connectors / Ports | 4 |
| Weight | 0.16 kg |
| Type | Multi-Function Switch |
| Function | Multi-Function Switch |
| Combi Switch Function | Heated wing mirror on/off, Window Regulator, Door Locking, Folding/tilting exterior mirrors |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.81
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Weight | 0.919 kg |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.93
Important compatibility info
| Weight | 6.6 kg |
| Thickness | 630 mm. 161 mm |
| Type | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 227 mm. 260 mm |
| Additional Information | with piston, with piston rod |
| Function | Bellow, air suspension |
| External Thread Size | 1/2" - 13 UNC, 3/4" - 16 UNF, 1/4" - 18 NPTF |
| Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.95
Important compatibility info
| Number of Connectors / Ports | 7 |
| Height | 84 mm |
| Weight | 1.074 kg |
| Function | Throttle body |
| Voltage | 12 V |
| Type | Throttle body |
| for OE number | 06A 133 064 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.11
Important compatibility info
| Belt Pulley Diameter | 70 mm |
| Type | Alternator |
| Alternator Charge Current | 130 A |
| Pulleys | with belt pulley |
| Voltage | 12 V |
| Number of Ribs | 7 |
| Function | Alternator |
| Weight | 5.94 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.11
Important compatibility info
| Weight | 3.86 kg |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.11
Important compatibility info
| Operating Mode | Electric |
| Function | Fuel Pump |
| Weight | 0.755 kg |
| for OE number | 003 091 53 01 |
| Type | Fuel Pump |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.11
Important compatibility info
| Type | Stabiliser Bar, suspension |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with coupling rod |
| Stabiliser Diameter | 27 mm |
| Weight | 4.14 kg |
| Additional Information | with rubber mounts |
| Function | Stabiliser Bar, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174336)
- 2x Febi Mounting, stabiliser bar (10022)
- 2x Febi Link/Coupling Rod, stabiliser bar (39895)
- 2x Febi Screw (37265)
- 2x Febi Screw (38298)
- 2x Febi Nut (22263)
£157.14
Important compatibility info
| Weight | 0.672 kg |
| for OE number | 132 034 03 10 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 46 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.14
Important compatibility info
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Number of Connectors / Ports | 7 |
| Weight | 1.45 kg |
| Type | Ignition Coil |
| for OE number | 12 08 098 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.15
Important compatibility info
| Placement on Vehicle | Rear |
| Function | Door Lock, driver cab |
| Weight | 2.16 kg |
| Type | Door Lock, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.15
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 1.072 kg |
| Type | Camshaft |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.15
Important compatibility info
| Length | 1122 mm |
| Number of Ribs | 8 |
| Weight | 1.407 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (179891)
- 1x Febi Belt Tensioner, v-ribbed belt (176489)
£157.15
Important compatibility info
| Number of Connectors / Ports | 9 |
| Combi Switch Function | Transmission Mode (automatic/manual) |
| Weight | 0.265 kg |
| Type | Steering Column Switch / Switch, cruise control / Switch, engine brake |
| Function | Steering Column Switch / Switch, cruise control / Switch, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.15
Important compatibility info
| Weight | 0.190 kg |
| Material | AEM (Ethylene Acrylate Rubber) |
| for OE number | 51.03905.0177 S2 |
| Number of screws | 18 |
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.15
Important compatibility info
| Weight | 1.6 kg |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.15
Important compatibility info
| Weight | 0.121 kg |
| Function | Multi-Function Switch |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Combi Switch Function | Window Regulator |
| Type | Multi-Function Switch |
| Placement on Vehicle | Passenger Side |
| Number of Connectors / Ports | 9. 14 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.15
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 65 mm |
| Weight | 4.65 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.20
Important compatibility info
| Placement on Vehicle | Rear, Right |
| Weight | 8.283 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.21
Important compatibility info
| Housing Type | with housing |
| Weight | 0.25 kg |
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.43
Important compatibility info
| Weight | 0.37 kg |
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Water Recirculation Pump, parking heater |
| Function | Water Recirculation Pump, parking heater |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.51
Important compatibility info
| Weight | 0.092 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.51
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Steering arm type | Control Arm |
| Bore Diameter | 19 mm |
| Weight | 13.670 kg |
| Pipe Diameter | 48 mm |
| Length | 630 m |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.60
Important compatibility info
| Weight | 0.917 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Additional Information 2 | with screw |
| Number of Teeth | 19 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (171957)
- 1x Febi Bolt, camshaft gear (173250)
£157.64
Important compatibility info
| Pipe Diameter | 50 mm |
| Mounting points diameter | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle |
| Steering arm type | Trailing Arm |
| Length | 595 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 16.9 kg |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.78
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023