Important compatibility info
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Weight | 1.046 kg |
Driver Position | for right-hand drive vehicles |
Inner length 2 | 796 mm |
Inner length 1 | 796 mm |
Outer length 1 | 1051 mm |
Outer length 2 | 1073 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Hub |
Type | Wheel Hub |
Weight | 18.0 kg |
Bolt Hole Circle Diameter | 335 mm |
Outer diameter | 380 mm |
Additional Information 2 | without wheel bearing |
Placement on Vehicle | Rear Axle |
Inner diameter | 110 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1269 mm |
Cone Size | 30 mm |
Rod/Strut | Push Rod |
Diameter 1 | 60 mm |
Extra Description | ProKit |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Adjustable | Adjustable on one side |
Weight | 19.876 kg |
Material | Steel |
Placement on Vehicle | Front Axle |
External Thread Size | M24 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Weight | 7.090 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring (40687)
- 1x Febi Filter, cabin air (18759)
- 1x Febi Fuel filter (101080)
- 1x Febi Fuel filter (47974)
- 1x Febi Air Filter (170711)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
- 1x Febi Oil Filter (49868)
- 1x Febi Fuel filter (31397)
Important compatibility info
Piston conrod diameter | 12.4 mm |
Function | Shock Absorber, driver cab suspension |
Max. Length | 320 mm |
Shock Absorber Mounting Type | Bottom eye, Top eye |
Placement on Vehicle | Rear |
Weight | 2.6 kg |
Min. Length | 238 mm |
Mounting points diameter | 12 mm |
Operating Mode | Pneumatic |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 6 |
Function | Oil Cooler, engine oil |
Weight | 3.214 kg |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Additional Information | with gasket/seal |
Extra Description | febi Plus |
Placement on Vehicle | Cylinder Head Cover |
for OE number | 22410-2G100 |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Colour | Black |
Weight | 1.620 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 76.1 mm |
Weight | 1.46 kg |
Placement on Vehicle | Rear Axle |
Length | 85.4 mm |
Brake System | Brembo |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
Function | EGR Valve |
Operating Mode | Electric |
Weight | 0.785 kg |
Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black, Green |
Number of Connectors / Ports | 3 |
Function | Control, swirl covers (induction pipe) |
Extra Description | febi Plus |
Type | Control, swirl covers (induction pipe) |
Weight | 0.248 kg |
for OE number | 11 61 7 560 538 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5, M12 x 1,75 |
Weight | 10.8 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information | with piston, with piston rod |
Outer diameter | 227 mm. 240 mm |
Thickness | 568 mm. 190 mm |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Number of Ribs | 8 |
Pulleys | without belt pulley |
Alternator Charge Current | 80 A |
Belt Pulley Diameter | 79 mm |
Weight | 6.70 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.687 kg |
Internal Thread Size | M14 x 1,5, M16 x 1,5, M20 x 1,5, M14 x 1 |
Additional Information 2 | with seal ring |
Outer diameter | 27 mm |
Operating Mode | Mechanical |
Number of Connectors / Ports | 4 |
Pipe Diameter | 27 mm |
Type | Pump, fuel pre-supply |
Function | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.47 kg |
Additional Information | with holder, with hose |
Voltage | 12 V |
Operating Mode | Electric |
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belts | with rounded tooth profile |
Additional Information 2 | switchable water pump |
Function | Water Pump & Timing Belt Kit |
Type | Water Pump & Timing Belt Kit |
Weight | 1.979 kg |
Number of Teeth | 145 |
Water pump impeller material | Plastic |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (100790)
- 1x Febi Water Pump, engine cooling (180948)
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 150 A |
Belt Pulley Diameter | 53 mm |
Weight | 6.39 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.35 kg |
Material | Grey Cast Iron |
Number of grooves | 2 |
Number of Wings | 6 |
Seal Material | Rubber/Metal |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Pulleys | with belt pulley |
for OE number | 50 01 837 288 |
Replaces | 33196 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Fill Medium | Brake Fluid |
Function | Clutch Booster |
Weight | 2.740 kg |
Type | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Alternator |
Type | Alternator |
Weight | 7.2 kg |
Number of Ribs | 6 |
Pulleys | with belt pulley |
Belt Pulley Diameter | 54 mm |
Alternator Charge Current | 150 A |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belt Pulley Diameter | 54 mm |
Weight | 6.58 kg |
Voltage | 12 V |
Function | Alternator |
Number of Ribs | 6 |
Pulleys | with belt pulley |
Alternator Charge Current | 150 A |
Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023