Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 9 |
| Rated Power | 5.5 kW |
| Function | Starter |
| Type | Starter |
| Weight | 8.40 kg |
| Replaces | 48966 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.47
Important compatibility info
| Weight | 3.3 kg |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.47
Important compatibility info
| Weight | 8.30 kg |
| Voltage | 24 V |
| Number of Teeth | 10 |
| Rated Power | 4 kW |
| Function | Starter |
| Type | Starter |
| for OE number | 58 0157 7135 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.47
Important compatibility info
| Width | 49 mm |
| Outer diameter | 188 mm |
| Inner diameter | 55 mm |
| Weight | 1.777 kg |
| Parameter | 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.47
Important compatibility info
| Additional Information 2 | Brushless Motor |
| Driver Position | for right-hand drive vehicles |
| Type | Interior Blower |
| Function | Interior Blower |
| Number of Connectors / Ports | 6 |
| Weight | 1.5 kg |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.47
Important compatibility info
| Weight | 1.805 kg |
| for OE number | SH02-12-201 S2 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 108 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49597)
- 1x Febi Tensioner, timing chain (175991)
- 1x Febi Guide, timing chain (174607)
- 1x Febi Guide, timing chain (174608)
- 1x Febi Gear/Sprocket, camshaft (174521)
- 1x Febi Sprocket, crankshaft (175992)
- 1x Febi Shaft Seal, crankshaft (106964)
- 1x Febi Bolt, crankshaft gear (173810)
£200.48
Important compatibility info
| Weight | 2.276 kg |
| Type | Air Suspension Valve |
| Function | Air Suspension Valve |
| Number of Connectors / Ports | 4 |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.60
Important compatibility info
| Additional Information 2 | switchable water pump |
| Function | Water Pump, engine cooling |
| Weight | 1.34 kg |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.70
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 777 mm |
| Operating Mode | Electric |
| Weight | 1.0 kg |
| Housing Diameter | 42 mm |
| Stroke | 222 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.71
Important compatibility info
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 132 mm |
| Weight | 2.60 kg |
| Oil Fill Quantity | 165 ml |
| Number of grooves | 2 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.71
Important compatibility info
| Width | 16 mm |
| Additional Information | with oil, with oil drain plug, with oil filter |
| Number of Teeth | 118 |
| Weight | 5.179 kg |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (183696)
- 1x Febi Screw Plug, oil sump (180960)
- 1x Febi Seal Ring, oil drain plug (44850)
- 1x Febi Oil Filter (32223)
- 1x Febi Engine Oil (172189)
£200.82
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| Weight | 0.043 kg |
| Number of Connectors / Ports | 5 |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£200.96
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Function | EGR Valve |
| Weight | 1.1 kg |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£201.01
Important compatibility info
| Length | 1065 mm |
| Number of Ribs | 7 |
| Weight | 1.443 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (179766)
- 1x Febi Belt Tensioner, v-ribbed belt (186123)
£201.19
Important compatibility info
| Type | Solenoid Valve, urea tank |
| Weight | 0.5 kg |
| Function | Solenoid Valve, urea tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£201.39
Important compatibility info
| Weight | 2.693 kg |
| Type | Oil Pump |
| Additional Information | with gasket/seal |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£201.46
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 180 A |
| Belt Pulley Diameter | 56 mm |
| Weight | 8.1 kg |
| Current Strength | 180 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£201.46
Important compatibility info
| Weight | 3.87 kg |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 136 mm |
| Thickness | 89 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 29 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 64 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 88 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£201.46
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 84 |
| Function | Chain Kit, oil pump drive |
| Weight | 1.65 kg |
| Type | Chain Kit, oil pump drive |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.20
Important compatibility info
| Weight | 1.377 kg |
| Additional Information | with gasket/seal |
| Colour | Black |
| Extra Description | febi Plus |
| Function | Fitting, intake manifold |
| Type | Fitting, intake manifold |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£202.27
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023