Important compatibility info
Length | 696 mm |
Outer diameter | 55 mm |
Number of Connectors / Ports | 2 |
Stroke | 357 mm |
Mounting points diameter | 25 mm. 26 mm |
Function | Tilt Cylinder, driver cab |
Pressure side external thread size | M14 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Type | Tilt Cylinder, driver cab |
Weight | 7.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tilt Cylinder, driver cab (44936)
- 1x Febi Cover, driver cab tilt cylinder (40798)
- 1x Febi Cable Tie (07026)
Important compatibility info
Function | Water Separator, fuel system |
Weight | 0.379 kg |
Type | Water Separator, fuel system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Function | Air Suspension Valve |
Internal Thread Size | M22 x 1,5 |
Type | Air Suspension Valve |
Weight | 2.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.03 kg |
Outer diameter 2 | 175 mm |
Number of Holes | 6 |
Bolt Hole Circle Diameter | 130 mm |
Function | Wheel Bearing Kit |
Bearing Type | Tapered Roller Bearing |
Inner diameter | 41.5 mm |
Outer diameter | 98 mm |
Width | 62 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter 1 | 85 mm |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with crown nut, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with belt pulley |
Alternator Charge Current | 180 A |
Belt Pulley Diameter | 50 mm |
Weight | 7.2 kg |
Current Strength | 180 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 694 mm. 674 mm |
Width | 70 mm |
Spring Design | Leaf spring |
Function | Spring Pack |
Type | Spring Pack |
Number of spring leaves | 2 |
Weight | 23.0 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Starter |
Type | Starter |
for OE number | 58 0152 0336 |
Weight | 8.0 kg |
Rated Power | 4 kW |
Number of Teeth | 10 |
Voltage | 24 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Length | 715 mm |
Weight | 3.524 kg |
Type | Propshaft, axle drive |
Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Function | Control Element, parking brake caliper |
Extra Description | febi Plus |
Type | Control Element, parking brake caliper |
Weight | 0.49 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Type | Dosing Module, urea injection |
Function | Dosing Module, urea injection |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Exterior Mirror |
Length | 495 mm |
Width | 230 mm |
Thickness | 130 mm |
Operating Mode | Electric |
Driver Position | for left-hand/right-hand drive vehicles |
Outer/Inner Mirror | for electric mirror adjustment, Heatable, with wide angle mirror, with main mirror |
Weight | 2.087 kg |
Type | Mirror System |
Function | Mirror System |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Exterior Mirror |
Length | 495 mm |
Width | 228 mm |
Thickness | 130 mm |
Operating Mode | Electric |
Driver Position | for left-hand/right-hand drive vehicles |
Outer/Inner Mirror | Heatable, with wide angle mirror, with main mirror |
Weight | 2.099 kg |
Type | Mirror System |
Camber Radius | 1200 mm. 300 mm |
Function | Mirror System |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Weight | 1.6 kg |
Type | Cooler, exhaust gas recirculation |
Function | Cooler, exhaust gas recirculation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Vehicle Equipment | for vehicles with steering angle sensor |
Number of Connectors / Ports | 14. 2. 12. 5 |
Type | Clock Spring, airbag |
Extra Description | febi Plus |
Weight | 0.206 kg |
Colour | Black |
Function | Clock Spring, airbag |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Number of Wings | 6 |
Number of grooves | 8 |
Material | Aluminium |
Type | Water Pump, engine cooling |
Weight | 2.982 kg |
Additional Information 2 | with seal ring |
for OE number | 2104 579 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Extra Description | febi Plus |
Stroke | 175 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Placement on Vehicle | Right Rear |
Length | 659 mm |
Paired article numbers | 179300 |
Weight | 1.0 kg |
Housing Diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 120 mm |
Inner diameter | 23 mm |
Rotation Direction | Anticlockwise rotation |
Function | Hydraulic Pump, steering |
Height | 130 mm |
Length | 150 mm |
Weight | 2.218 kg |
Internal Thread Size | M16 x 1,5 |
Type | Hydraulic Pump, steering |
for OE number | 1401 813 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wishbone Angle Measurement | 47 ° |
Inner diameter | 25 mm. 23 mm |
Steering arm type | Triangular Control Arm (CV) |
Pipe Diameter | 48 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 19.73 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.0 kg |
Type | Oil Line, charger |
Forward- /Backflow | Supply Line |
Function | Oil Line, charger |
for turbocharger (art. no.) | 192621, 191884 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Material | Steel |
Additional Information 2 | with rubber mount, with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 42136 |
Weight | 6.65 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.3 kg |
Type | Control, swirl covers (induction pipe) |
Function | Control, swirl covers (induction pipe) |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 370 mm |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Function | Brake Disc |
Type | Brake Disc Rotor |
Number of mounting bores | 1 |
Weight | 11.5 kg |
Surface | Coated |
Bolt Hole Circle Diameter | 112 mm |
Minimum thickness | 22.4 mm |
Thickness | 64 mm |
Brake Disc Thickness | 24 mm |
Placement on Vehicle | Rear Axle |
Centering Diameter | 67 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Weight | 0.616 kg |
Function | Camshaft Adjuster |
Type | Camshaft Adjuster |
Placement on Vehicle | Intake Side |
Number of Teeth | 30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 06 36 176 |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 148 |
Function | Timing Chain Kit |
Weight | 2.190 kg |
Type | Timing Chain Kit |
Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33043)
- 1x Febi Tensioner, timing chain (33044)
- 1x Febi Guide, timing chain (173887)
- 1x Febi Guide, timing chain (173890)
- 1x Febi Guide, timing chain (106667)
- 1x Febi Gear/Sprocket, camshaft (173894)
- 1x Febi Gear/Sprocket, camshaft (173895)
- 1x Febi Sprocket, crankshaft (174669)
- 1x Febi Oil Jet, timing chain (174153)
- 2x Febi Screw (33067)
- 2x Febi Screw (33068)
- 2x Febi Screw (33069)
- 2x Febi Bolt, camshaft gear (172269)
Important compatibility info
Function | Fan, engine cooling |
Weight | 1.455 kg |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Type | Alternator |
Function | Alternator |
Weight | 7.2 kg |
Number of Ribs | 8 |
Belt Pulley Diameter | 73 mm |
Alternator Charge Current | 80 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.83 kg |
Type | Crankshaft, air compressor |
Function | Crankshaft, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 13.300 kg |
Placement on Vehicle | Front Axle |
Function | Repair Kit, control arm |
Extra Description | ProKit |
Type | Repair Kit, control arm |
Additional Information 2 | with coupling rod |
Steering | with tie rod ends |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Control/Trailing Arm, wheel suspension (11350)
- 1x Febi Control/Trailing Arm, wheel suspension (11137)
- 1x Febi Control/Trailing Arm, wheel suspension (11138)
- 1x Febi Link/Coupling Rod, stabiliser bar (17214)
- 1x Febi Link/Coupling Rod, stabiliser bar (17216)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (21498)
- 2x Febi Tie Rod End (22044)
- 1x Febi Control/Trailing Arm, wheel suspension (21906)
- 1x Febi Control/Trailing Arm, wheel suspension (21904)
- 1x Febi Control/Trailing Arm, wheel suspension (21198)
- 1x Febi Control/Trailing Arm, wheel suspension (21196)
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 3.969 kg |
Type | Compressor, compressed-air system |
Function | Compressor, compressed-air system |
Extra Description | febi Plus |
for OE number | 164 320 12 04 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | High Pressure Pump |
Type | High Pressure Pump |
Weight | 0.794 kg |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.094 kg |
Fill Medium | Mineral Oil |
Type | Clutch Booster |
Function | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Function | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Type | Mass Air Flow Sensor |
Weight | 0.0180 kg |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Length | 667 mm |
Weight | 2.850 kg |
Multi-piece | one-piece |
Type | Propshaft, axle drive |
Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.146 kg |
Type | Oil Line, charger |
Forward- /Backflow | Supply Line |
Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.2 kg |
Type | Cylinder Head, air compressor |
Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Stroke | 175 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Placement on Vehicle | Left Rear |
Length | 659 mm |
Operating Mode | Electric |
Paired article numbers | 179299 |
Weight | 1.0 kg |
Housing Diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Clutch Release Bearing |
Type | Clutch Release Bearing |
Weight | 1.438 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Pump, steering |
Weight | 3.57 kg |
Length | 210 mm |
Height | 180 mm |
Width | 160 mm |
Internal Thread Size | M26 x 1,5, M16 x 1,5 |
Type | Hydraulic Pump, steering |
for OE number | 21488865 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M26 x 1,5 |
Min. Length | 448 mm |
Weight | 5.915 kg |
Max. Length | 698 mm |
Outer diameter | 70 mm |
Length | 448 mm |
Placement on Vehicle | Front Axle |
Piston conrod diameter | 28 mm |
Function | Slave Cylinder, power steering |
Type | Slave Cylinder, power steering |
Stroke | 250 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Pump |
Function | Oil Pump |
Weight | 5.602 kg |
for OE number | 50 10 412 711 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Weight | 1.5 kg |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.62 kg |
Type | Dosing Module, urea injection |
Function | Dosing Module, urea injection |
for OE number | 58 0173 0656 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with slide rails |
Weight | 2.480 kg |
Width | 19 mm |
Number of Teeth | 84 |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
for OE number | 1 562 244 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (46282)
- 1x Febi Tensioner, timing belt (46371)
Important compatibility info
Number of Connectors / Ports | 5 |
Function | EGR Valve |
Additional Information | with gasket/seal |
Weight | 0.82 kg |
Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi EGR Valve (109641)
- 1x Febi Gasket, EGR valve (170908)
Important compatibility info
Additional Information | with gasket/seal |
Function | Cylinder Head, air compressor |
Type | Cylinder Head, air compressor |
Weight | 3.7 kg |
Additional Information 2 | with bolts/screws, with spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.5 kg |
Operating Mode | Manual |
Number of Connectors / Ports | 3 |
Type | Tilt Pump, driver cab |
Function | Tilt Pump, driver cab |
Pressure side external thread size | M12 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
Voltage | 24 V |
Number of Ribs | 10 |
Pulleys | with belt pulley |
Alternator Charge Current | 120 A |
Belt Pulley Diameter | 64 mm |
Weight | 6.75 kg |
Current Strength | 120 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Stroke | 455 mm |
Mounting points diameter | 20.3 mm. 35 mm |
Function | Tilt Cylinder, driver cab |
Weight | 11.6 kg |
Pressure side external thread size | M12 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Length | 677 mm |
Outer diameter | 60 mm |
Number of Connectors / Ports | 3 |
Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Number of Connectors / Ports | 5 |
Function | EGR Valve |
Weight | 0.91 kg |
Additional Information 2 | Control Unit/Software must be trained/updated |
Additional Information | with seal |
Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi EGR Valve (34925)
- 1x Febi Gasket, intake manifold housing (36755)
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 318 mm |
Thickness | 67.5 mm |
Brake Disc Thickness | 30 mm |
Minimum thickness | 28 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 69.1 mm |
Surface | Coated |
Weight | 10.0 kg |
Number of mounting bores | 1 |
Machining | High-carbon |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | perforated/vented, two-piece brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023