Important compatibility info
Outer diameter 2 | 61.2 mm |
Type | Shaft Seal, manual transmission |
Material | ACM (Polyacrylate) |
Height | 8.9 mm. 14.7 mm |
Function | Shaft Seal, manual transmission |
Outer diameter 1 | 54.9 mm |
Weight | 0.04 kg |
Inner diameter | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.075 kg |
Function | Bellow Kit, steering |
Length | 218 mm |
Material | Thermoplast |
Inner diameter 1 | 16 mm |
Inner diameter 2 | 67 mm |
Additional Information 2 | with clamps |
Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (103033)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (45634)
Important compatibility info
Weight | 0.020 kg |
Function | Shaft Seal, differential |
Height | 8 mm |
Placement on Vehicle | both sides |
Inner diameter | 34.9 mm |
Thickness | 15 mm |
Outer diameter | 54.9 mm |
Material | ACM (Polyacrylate) |
Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Spanner Size | 14, 15 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 379 mm |
Weight | 0.100 kg |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.043 kg |
Length | 45 mm |
Thickness | 16 mm |
Function | Finger Follower, engine timing |
Type | Finger Follower, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.175 kg |
Placement on Vehicle | Rear Axle |
Material | Rubber/Metal |
Outer diameter | 80 mm |
Inner diameter | 10 mm |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 40 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Length | 17 mm |
Function | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 375 mm |
Spanner Size | 15 |
Weight | 0.094 kg |
Type | Brake Hose |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 295 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 50 mm |
Thickness | 63 mm |
Inner diameter | 24 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Weight | 0.041 kg |
Type | Rubber Buffer, suspension |
Width | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.306 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Cone Size | 17 mm |
Mounting points diameter | 8.5 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 36.4 mm |
Thickness | 50 mm |
Inner diameter | 12.4 mm |
Weight | 0.147 kg |
Placement on Vehicle | Rear Axle Left, Lower, outer, Rear Axle Right, Rear |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.470 kg |
Piston Diameter | 19.1 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Cast Iron |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.094 kg |
Replaces | 06284 |
Material | Plastic |
Outer diameter | 60 mm |
Type | Cap, fuel tank |
Function | Cap, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Cast Steel |
Piston Diameter | 17.4 mm |
Function | Wheel Brake Cylinder |
Weight | 0.315 kg |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
Placement on Vehicle | Left Front |
Paired article numbers | 18308 |
Number of Connectors / Ports | 5 |
Function | Switch, window regulator |
Control Type | Rocker Actuation |
Extra Description | febi Plus |
Type | Switch, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Weight | 0.119 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.064 kg |
Placement on Vehicle | Front Axle |
Material | Thermoplast |
Thickness | 228.5 mm |
Type | Protective Cap/Bellow, shock absorber |
Function | Protective Cap/Bellow, shock absorber |
for OE number | 1H0 413 175 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.092 kg |
Surface | Phosphatized |
Type | Finger Follower, engine timing |
Function | Finger Follower, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Radiator Hose |
Weight | 0.23 kg |
Placement on Vehicle | Upper |
Material | Rubber, Rubber with fabric lining |
Outer diameter | 43 mm. 39 mm |
Inner diameter | 31 mm. 35 mm |
Colour | Black |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
Placement on Vehicle | Right Front |
Paired article numbers | 18307 |
Number of Connectors / Ports | 5 |
Function | Switch, window regulator |
Extra Description | febi Plus |
Control Type | Rocker Actuation |
Type | Switch, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023