Important compatibility info
Weight | 0.123 kg |
Placement on Vehicle | Front Axle Right |
Function | Brake Hose |
Length | 415 mm |
Thread Length | 9 mm |
Type | Brake Hose |
Internal Thread Size | M10 x 1 |
Paired article numbers | 170868, 179088 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.190 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Plastic |
Outer diameter | 110 mm |
Inner diameter | 32 mm |
Function | Rolling Bearing, suspension strut support mount |
Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | CV Joint |
Weight | 0.173 kg |
Placement on Vehicle | Wheel Side, Front Axle |
Length | 110 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 77 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173317)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.047 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 584 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Ignition Switch |
Number of Connectors / Ports | 7 |
Weight | 0.051 kg |
Type | Ignition Switch |
Control Type | Rotary Operation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 422 mm |
Height | 9.4 mm |
Width | 219 mm |
Material | NBR (nitrile butadiene rubber) |
Function | Gasket, cylinder head cover |
Weight | 0.054 kg |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Switch, clutch control (cruise control) |
Type | Switch, clutch control (cruise control) |
Weight | 0.019 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.03 kg |
for OE number | 4 832 217 |
Number of Connectors / Ports | 2 |
Operating Mode | Electric |
Function | Stop Light Switch |
Type | Stop Light Switch |
Housing Colour | black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1 823 388 |
Weight | 0.12 kg |
Width | 22 mm |
Number of Teeth | 117 |
Surface | Coated |
Belts | with rounded tooth profile |
Type | Timing Belt |
Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 105 mm |
Width | 114 mm |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Weight | 0.34 kg |
Type | Suspension Strut Support Mount |
Height | 50 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamps |
Weight | 0.289 kg |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 32 mm |
Cooling Hose | from engine to engine cooler |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Radiator Hose |
Placement on Vehicle | Lower Right |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from thermostat to radiator |
Weight | 0.298 kg |
Type | Radiator Hose |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 301.5 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 18 mm |
Stroke | 211 mm |
Eject Force | 325 N |
Housing Diameter | 19 mm |
Length | 545 mm |
Placement on Vehicle | both sides |
Type | Gas Spring, boot/cargo area |
Weight | 0.31 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 55 mm |
Width | 130 mm |
Function | Hydraulic Filter, automatic transmission |
Length | 185 mm |
Weight | 0.192 kg |
Type | Hydraulic Filter, automatic transmission |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.720 kg |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 72 mm |
Inner diameter | 39 mm |
Additional Information | with axle nut |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Width | 37 mm |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.360 kg |
Placement on Vehicle | Front Axle |
Length | 106 mm |
Material | Rubber/Metal |
Outer diameter | 64 mm |
Inner diameter | 12 mm |
External Thread Size | M8 x 1,25 |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 35 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Nut |
Wheel Fastening | Conical Seat F |
Surface | Chromed |
Spanner Size | 17, 19 |
Thickness | 26 mm |
Placement on Vehicle | Front Axle, Rear Axle |
for OE number | M115 |
Outer diameter | 23.7 mm |
Material | Steel |
Quality/ Grade | 8 |
Type | Wheel Nut |
Weight | 0.26 kg |
Lockable | Lockable |
Internal Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with oil sump gasket |
Weight | 0.192 kg |
Function | Hydraulic Filter Kit, automatic transmission |
Length | 178 mm |
Height | 53 mm |
Width | 128 mm |
Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1 513 111 |
Material | Plastic |
Type | Expansion Tank, coolant |
Weight | 0.465 kg |
Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.760 kg |
Function | Mounting, manual transmission |
Placement on Vehicle | Lower, Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023