Important compatibility info
Paired article numbers | 174781 |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Placement on Vehicle | Left |
Weight | 1.0 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.170 kg |
Material | Thermoplast |
Placement on Vehicle | Wheel Side, Front Axle Right |
Length | 116 mm |
Joint Type | CV Joint |
Inner diameter 2 | 86 mm |
Paired article numbers | 175143 |
Inner diameter 1 | 38 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174812)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.320 kg |
Hole Spacing | 110 mm |
Placement on Vehicle | Rear |
Length | 165 mm |
Material | Cast Aluminium |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Function | Sensor, crankshaft pulse |
Number of Connectors / Ports | 3 |
Length | 580 mm |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
Cable Length | 552 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without ball bearing |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Suspension Strut Support Mount |
Material | Rubber/Metal |
Type | Suspension Strut Support Mount |
Weight | 0.32 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 7.8 kg |
Rim Hole Number | 6 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 324 mm |
Thickness | 82.5 mm |
Brake Disc Thickness | 18 mm |
Minimum thickness | 16 mm |
Bolt Hole Circle Diameter | 139.7 mm |
Centering Diameter | 96.3 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | Standard Medium Kit |
Chain Type | Duplex, Closed chain |
Number of Chain Links | 132 |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
for OE number | 1 099 874 S3 |
Weight | 2.955 kg |
Additional Information | with slide rails, with chain tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (36295)
- 1x Febi Tensioner, timing chain (36297)
- 1x Febi Guide, timing chain (40151)
- 1x Febi Guide, timing chain (46256)
- 1x Febi Guide, timing chain (102201)
- 1x Febi Guide, timing chain (102199)
- 2x Febi Gear/Sprocket, camshaft (102200)
Important compatibility info
Placement on Vehicle | Right |
Weight | 0.58 kg |
Material | Plastic |
Paired article numbers | 05821 |
Colour | Black |
Function | Exterior Door Handle |
Type | Exterior Door Handle |
Lock System | with lock barrel, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Holder, exhaust pipe |
Weight | 0.373 kg |
Type | Holder, exhaust pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 14.0 kg |
Outer diameter | 325 mm |
Placement on Vehicle | Front Axle |
Thickness | 103 mm |
Brake Disc Thickness | 30 mm |
Brake Disc Type | Internally Vented |
Number of Holes | 10 |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 158 mm |
Surface | Coated |
Type | Brake Disc |
Function | Brake Disc |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Rubber Buffer, suspension |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 60 mm |
Width | 51 mm |
Material | PU (Polyurethane) |
Weight | 0.037 kg |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Length | 512 mm |
Paired article numbers | 193253 |
Weight | 0.2 kg |
Housing Diameter | 26 mm |
Eject Force | 175 N |
Stroke | 182 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, bonnet |
Function | Gas Spring, bonnet |
Housing length | 300.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Paper, Rubber |
Water pump impeller material | Grey Cast Iron |
Function | Water Pump, engine cooling |
Material | Grey Cast Iron |
Number of Wings | 12 |
Type | Water Pump, engine cooling |
Weight | 10.05 kg |
Additional Information | with gaskets/seals |
for OE number | 51.06500.6708 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.41 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front |
Length | 63.5 mm. 80 mm |
Outer diameter | 60 mm |
Inner diameter | 16.5 mm |
Function | Bush, driver cab suspension |
Type | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Outer diameter | 322 mm |
Thickness | 134 mm |
Brake Disc Thickness | 30 mm |
Brake Disc Type | Internally Vented |
Number of Holes | 8 |
Minimum thickness | 27.75 mm |
Bolt Hole Circle Diameter | 275 mm |
Surface | Coated |
Function | Brake Disc |
Weight | 17.8 kg |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with adjuster |
Number of Connectors / Ports | 3 |
Weight | 0.4 kg |
for OE number | 4F5 827 505 D |
Type | Tailgate Lock |
Function | Tailgate Lock |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Function | Lock Cylinder Kit |
Type | Lock Cylinder Kit |
Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 15.9 kg |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle Right |
Outer diameter | 374 mm |
Thickness | 66.3 mm |
Brake Disc Thickness | 36 mm |
Minimum thickness | 34.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 75 mm |
Paired article numbers | 171459 |
Surface | Coated |
Number of mounting bores | 1 |
Machining | High-carbon |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | Internally Vented |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.702 kg |
Placement on Vehicle | Rear |
Inner diameter | 22.5 mm |
Length | 96 mm |
Function | Bush, spring eye |
Type | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Fulfils test standard | VG 96917 |
Function | Plug |
Cross Section | 35 mm² |
Type | Plug |
Voltage | 24 V |
Number of Connectors / Ports | 2 |
Protection Type (IP Code) | X4, X7, 54 |
Weight | 0.251 kg |
Current Strength | 135 A |
Version | OE Standard |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023