Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
Length | 88 mm |
Material | Rubber |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 92 mm |
Function | Bellow Kit, drive shaft |
Weight | 0.34 kg |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (07997)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (07995)
- 1x Febi Spring Washer (07253)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Cone Size | 13.7 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M12 x 1,25 |
Weight | 0.31 kg |
Mounting points diameter | 8.5 mm |
Function | Ball Joint |
Additional Information | with fastening/mounting material |
Type | Ball Joint |
Steering arm type | for control arm |
for OE number | 7082812 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M10 x 1 |
Weight | 0.10 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 344 mm. 315 mm |
Function | Brake Hose |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.108 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 435 mm |
Spanner Size | 14 |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.164 kg |
Placement on Vehicle | Centre |
Length | 1643 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Replaces | 16922 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.008 kg |
Function | Air Filter, traction battery casing |
Type | Air Filter, traction battery casing |
Length | 258 mm |
Width | 114 mm |
Height | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.086 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 206 mm |
Material | Thermoplast |
Inner diameter 1 | 12 mm |
Inner diameter 2 | 54 mm |
Function | Bellow Kit, steering |
Additional Information 2 | with clamps |
Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (101694)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38763)
Important compatibility info
Material | Plastic |
Weight | 0.19 kg |
Function | Valve, fuel filter |
Type | Valve, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, fuel filter (02087)
- 1x Febi Spring Split Pin, fuel filter (thermostat) (40607)
- 2x Febi Clamping Clip (38679)
- 1x Febi Seal, fuel filter (39732)
Important compatibility info
Weight | 0.011 kg |
Outer diameter | 55 mm |
Inner diameter | 40 mm |
Rotation Direction | Clockwise rotation |
Function | Shaft Seal, crankshaft |
Material | PTFE (polytetrafluoroethylene), FPM (fluoride rubber) |
Height | 5.9 mm |
Placement on Vehicle | frontal sided |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.118 kg |
Function | Wheel Bolt |
Screw length below head | 40 mm. 77 mm |
Spanner Size | 17 |
Surface | Zink flake coated |
Thread Length | 20 mm |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 10.9 |
Wheel Fastening | Ball seat A/G |
Placement on Vehicle | Rear Axle, Front Axle |
Length | 95 mm |
Material | Steel |
Outer diameter | 22.5 mm |
External Thread Size | M12 x 1,5 |
Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
Material | Plastic, Metal |
Number of Connectors / Ports | 2 |
Function | Sensor, coolant temperature |
Type | Sensor, coolant temperature |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.350 kg |
Placement on Vehicle | Front Axle Left, Lower |
Paired article numbers | 12660 |
External Thread Size | M12 x 1,5 |
Function | Ball Joint |
Cone Size | 15 mm |
Mounting points diameter | 8.1 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Material | Rubber |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 40.7 mm |
Thickness | 16.2 mm |
Inner diameter | 22 mm |
Colour | Grey |
Function | Mounting, crankcase ventilation valve |
Weight | 0.015 kg |
Type | Mounting, crankcase ventilation valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter, cabin air |
Length | 438 mm |
Height | 57 mm |
Width | 182 mm |
Filter type | Pollen Filter |
Type | Filter, cabin air |
Weight | 0.20 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 91 mm |
Thickness | 72 mm |
Spanner Size | 17 |
Function | Tie Rod End |
Internal Thread Size | M12 x 1,25 |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.205 kg |
Placement on Vehicle | Upper |
Cooling Hose | from engine cooler to water pump |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.170 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 51 mm. 40 mm |
Thickness | 37 mm |
Inner diameter | 12 mm |
Bearing Type | Spherical Roller Bearing |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Placement on Vehicle | Front Axle Right |
Length | 285 mm |
Material | Steel |
Paired article numbers | 28735 |
Rod/Strut | Coupling Rod |
Colour | Black |
Surface | Painted |
Thread Length | 21 mm |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Spanner Size | 17 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right, Front |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Weight | 0.172 kg |
Material | Rubber/Metal |
Outer diameter | 37.6 mm |
Thickness | 60 mm |
Inner diameter | 14.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023