Proud to be a UK-based company
Contact us
Important compatibility info
| Bolt Head/Nut Design | Male Torx |
| Function | Camber Correction Screw |
| Screw length below head | 120 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Weight | 0.235 kg |
| Length | 136 mm |
| Steering arm type | Control Arm |
| Type | Camber Correction Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
£17.02
Important compatibility info
| Material | Thermoplastic polyester elastomer |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Function | Bellow Kit, steering |
| Length | 181 mm |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 12 mm |
| Inner diameter 2 | 55 mm |
| Weight | 0.063 kg |
| Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.30
Important compatibility info
| Function | Seal Kit, injector pump |
| Weight | 0.010 kg |
| Type | Seal Kit, injector pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.37
Important compatibility info
| Notches / Holes Number | 1 |
| Type | Exhaust Valve |
| Length | 201.7 mm |
| Weight | 0.170 kg |
| Valve head diameter | 42 mm |
| Valve stem diameter | 8.975 mm |
| Function | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.02
Important compatibility info
| Length | 455 mm |
| Width | 177 mm |
| Thickness | 152 mm |
| Weight | 4.268 kg |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
| Extra Description | febi Plus |
| for OE number | 4E0 616 007 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£386.30
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 12 |
| Rated Power | 5.5 kW |
| Weight | 9.34 kg |
| for OE number | 51.26201.7239 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£275.71
Important compatibility info
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Weight | 0.068 kg |
| External Thread Size | M14 x 1,5 |
| Cable Length | 510 mm |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.42
Important compatibility info
| Function | Mounting, automatic transmission |
| Weight | 0.62 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.08
Important compatibility info
| Type | Sensor, boost pressure |
| Weight | 0.02 kg |
| Function | Sensor, boost pressure |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.51
Important compatibility info
| Height | 201 mm |
| Outer diameter | 107 mm |
| Weight | 0.99 kg |
| Chemical Properties | Contains silicate |
| Type | Coolant Filter |
| Function | Coolant Filter |
| Gasket outer diameter | 71.7 mm |
| Gasket inner diameter | 62.3 mm |
| Internal Thread Size | 1 1/16" - 16 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.58
Important compatibility info
| Weight | 0.34 kg |
| Height | 82 mm |
| Length | 247 mm |
| Width | 168 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.96
Important compatibility info
| Weight | 0.02 kg |
| Placement on Vehicle | frontal sided |
| Width | 7 mm |
| Material | FPM (fluoride rubber) |
| Outer diameter | 85 mm |
| Inner diameter | 70 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Weight | 6.5 kg |
| Placement on Vehicle | Front Axle, steered trailing axle |
| Length | 281 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Mounting points diameter | 22 mm. 40 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.66
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| Weight | 0.447 kg |
| Paired article numbers | 102847 |
| External Thread Size | M12 x 1,5 |
| Length | 94 mm |
| Type | Tie Rod End |
| Additional Information 2 | with nut |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (102848)
- 1x Febi Nut (45868)
£17.81
Important compatibility info
| Weight | 0.4 kg |
| Placement on Vehicle | Front Axle |
| Height | 30 mm |
| Material | Rubber/Metal |
| Outer diameter | 120 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.23
Important compatibility info
| Material | Plastic |
| Outer diameter | 60 mm |
| Thickness | 46.5 mm. 70 mm |
| Inner diameter | 12.5 mm |
| Weight | 0.185 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.45
Important compatibility info
| Weight | 1.873 kg |
| Placement on Vehicle | Front Axle Left |
| Height | 103 mm |
| Material | Rubber/Metal |
| Outer diameter | 150 mm |
| Paired article numbers | 102047 |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (176428)
- 1x Febi Rolling Bearing, suspension strut support mount (177290)
£56.96
Important compatibility info
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Right |
| Type | Tie Rod End |
| Weight | 0.643 kg |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Paired article numbers | 183433 |
| Spanner Size | 22 |
| Length | 162 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.12
Important compatibility info
| Weight | 0.27 kg |
| Outer diameter | 38.5 mm |
| Opening Temperature | 90 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.35
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 7 |
| Function | Throttle body |
| Weight | 0.961 kg |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.83
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023