Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.03 kg |
| External Thread Size | M14 x 1,5 |
| Length | 52 mm |
| Material | Brass, Plastic |
| Spanner Size | 19 |
| Colour | White |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Screw length below head | 28 mm |
| Type | Sensor, coolant temperature |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.330 kg |
| Length | 131 mm |
| Width | 74 mm |
| Function | Spring Clamp |
| Type | Spring Clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.102 kg |
| External Thread Size | M14 x 1,5 |
| Spanner Size | 19 |
| Number of Connectors / Ports | 2 |
| Switch Point | 130 °C |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| for OE number | 008 542 45 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.25 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 99 mm |
| Material | Rubber |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 84 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17378)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (38765)
- 1x Febi Molybdenum Grease (02582)
£11.09
Important compatibility info
| Width | 18 mm. 22 mm |
| Inner diameter | 30 mm |
| Type | Joint Bearing, driver cab suspension |
| Function | Joint Bearing, driver cab suspension |
| Outer diameter | 47 mm |
| Weight | 0.140 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Length | 1691 mm |
| Brake Type | Disc Brake |
| Function | Cable Pull, parking brake |
| Weight | 0.370 kg |
| Placement on Vehicle | Left Rear, Right Rear |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Weight | 0.38 kg |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Outer diameter | 53 mm |
| Inner diameter | 16 mm |
| Thickness | 50 mm |
| Function | Bush, shock absorber |
| Type | Bush, shock absorber |
| Material | Rubber/Metal |
| Weight | 0.507 kg |
| Width | 105 mm |
| Length | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.015 kg |
| Material | Plastic, Metal |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.301 kg |
| Function | Cable Pull, parking brake |
| Length | 1470 mm |
| Placement on Vehicle | Right Rear, Left Rear |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Additional Information | with holder |
| Placement on Vehicle | Front Axle |
| Weight | 1.22 kg |
| Additional Information 2 | with bolts/screws |
| Function | Mounting Kit, stabiliser bar |
| Inner diameter | 18 mm |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Fastening Bolt, stabiliser bar (29507)
- 2x Febi Mounting, stabiliser bar (31348)
- 2x Febi Bracket, stabiliser mounting (23366)
£11.09
Important compatibility info
| Weight | 0.031 kg |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 60 mm |
| Thickness | 11 mm |
| Outer diameter | 73 mm |
| Function | Shaft Seal, wheel bearing |
| Material | FKM (fluorocarbon rubber) |
| Type | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Placement on Vehicle | Upper |
| Outer diameter | 35 mm |
| Inner diameter | 27 mm |
| Inner diameter 1 | 31 mm |
| Outer diameter 1 | 40 mm |
| Cooling Hose | from distributor to engine cooler |
| Function | Radiator Hose |
| Weight | 0.19 kg |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Weight | 0.13 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, at brake caliper |
| Length | 485 mm |
| Spanner Size | 14, 17 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.02 kg |
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.118 kg |
| Function | Wheel Bolt |
| Screw length below head | 40 mm. 77 mm |
| Spanner Size | 17 |
| Surface | Zink flake coated |
| Thread Length | 20 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 10.9 |
| Wheel Fastening | Ball seat A/G |
| Placement on Vehicle | Rear Axle, Front Axle |
| Length | 95 mm |
| Material | Steel |
| Outer diameter | 22.5 mm |
| External Thread Size | M12 x 1,5 |
| Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Material | Plastic |
| Weight | 0.19 kg |
| Function | Valve, fuel filter |
| Type | Valve, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, fuel filter (02087)
- 1x Febi Spring pin, fuel filter (40607)
- 2x Febi Clamping Clip (38679)
- 1x Febi Seal, fuel filter (39732)
£11.09
Important compatibility info
| Weight | 0.061 kg |
| Function | Membrane, vacuum pump |
| Type | Membrane, vacuum pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.25 kg |
| Type | Air Filter |
| Function | Air Filter |
| Width | 164 mm |
| Length | 342 mm |
| Height | 41 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.350 kg |
| Placement on Vehicle | Outer, Front Axle Left, Front Axle Right |
| Length | 73 mm |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023