Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 16 mm |
| Spanner Size | E8 |
| Thread Length | 20 mm |
| Weight | 0.015 kg |
| Bolt Head/Nut Design | Male Torx |
| Type | Tear-Off Screw, ignition lock |
| Function | Tear-Off Screw, ignition lock |
| External Thread Size | M8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.57
Important compatibility info
| Length | 101 mm |
| Filter type | In-Line Filter |
| Weight | 0.045 kg |
| Outer diameter | 55 mm |
| Pipe Diameter | 8 mm |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.57
Important compatibility info
| Thickness | 18 mm |
| Spanner Size | 30 |
| Placement on Vehicle | Rear Axle Left |
| Surface | Zinc-coated |
| Thread Type | with right-hand thread |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 8 |
| Function | Nut, kingpin |
| Type | Nut, kingpin |
| Weight | 0.105 kg |
| Paired article numbers | 03812 |
| Internal Thread Size | M20 x 1,5 |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.57
Important compatibility info
| Length | 118 mm |
| Outer diameter | 48 mm |
| Filter type | In-Line Filter |
| Function | Fuel filter |
| Weight | 0.02 kg |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.57
Important compatibility info
| Rims | for steel rims |
| Bolt Head/Nut Design | Male Hex |
| Outer diameter | 23 mm |
| Material | Steel |
| Internal Thread Size | M12 x 1,5 |
| Weight | 0.06 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Thickness | 32 mm |
| Spanner Size | 19 |
| Surface | Zinc-coated |
| Quality/ Grade | 10 |
| Wheel Fastening | Conical Seat F |
| Function | Wheel Nut |
| Type | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.58
Important compatibility info
| Material | Rubber |
| Function | Mounting, stabiliser bar |
| Weight | 0.06 kg |
| Placement on Vehicle | Front Axle, inner |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.58
Important compatibility info
| Weight | 0.005 kg |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Gasket, oil filter housing |
| Function | Gasket, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.58
Important compatibility info
| Weight | 0.045 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber |
| Inner diameter | 21.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.58
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber |
| Inner diameter | 17 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.58
Important compatibility info
| Internal Thread Size | M12 x 1,5 |
| Material | Steel |
| Weight | 0.058 kg |
| Placement on Vehicle | Rear Axle, Front Axle |
| Outer diameter | 28 mm |
| Thickness | 27.5 mm |
| Spanner Size | 19 |
| Surface | Zinc-coated |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 8 |
| Wheel Fastening | Conical Seat F |
| Function | Wheel Nut |
| Rims | for light alloy rims |
| Type | Wheel Nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.58
Important compatibility info
| Filter type | Spin-on Filter |
| Seal Diameter | 62.5 mm |
| Height | 87 mm |
| Outer diameter | 69 mm |
| Internal Thread Size | M20 x 1,5 |
| Function | Oil Filter |
| Weight | 0.250 kg |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.59
Important compatibility info
| Function | Seal Ring, oil drain plug |
| Type | Seal Ring, oil drain plug |
| Weight | 0.009 kg |
| Inner diameter | 23.6 mm |
| Outer diameter | 26.3 mm |
| Material | FKM (fluorocarbon rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.59
Important compatibility info
| Rims | for steel rims |
| Screw length below head | 26 mm |
| Bolt Head/Nut Design | Male Hex |
| Material | Steel |
| External Thread Size | M12 x 1,25 |
| Weight | 0.06 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 50.5 mm |
| Spanner Size | 17 |
| Surface | Zink flake coated |
| Thread Length | 24 mm |
| Quality/ Grade | 10.9 |
| Wheel Fastening | Conical Seat F |
| Function | Wheel Bolt |
| Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.59
Important compatibility info
| Height | 9 mm |
| Material | ACM (Polyacrylate) |
| Function | Shaft Seal, manual transmission |
| Outer diameter | 43 mm |
| Inner diameter | 27 mm |
| Weight | 0.0175 kg |
| Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.60
Important compatibility info
| Length | 26 mm |
| Material | Plastic |
| Seal Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 23 mm |
| Inner diameter | 13 mm |
| Colour | Black |
| Cooling Hose | from oil cooler to engine block |
| Type | Coolant Pipe |
| Function | Coolant Pipe |
| Extra Description | febi Plus |
| Weight | 0.062 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.60
Important compatibility info
| Placement on Vehicle | Rear, Centre |
| Length | 77 mm |
| Width | 51 mm |
| Material | Rubber |
| Thickness | 40 mm |
| Type | Mount, exhaust system |
| Function | Mount, exhaust system |
| Weight | 0.096 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.60
Important compatibility info
| Function | Valve Guide |
| Length | 36.5 mm |
| Outer diameter | 12 mm |
| Inner diameter | 7.8 mm |
| Weight | 0.019 kg |
| Type | Valve Guide |
| Valve type | for inlet valves, for exhaust valves |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.60
Important compatibility info
| Weight | 0.078 kg |
| Material | Rubber/Metal |
| Outer diameter | 47 mm. 23 mm |
| Thickness | 40 mm |
| Inner diameter | 10 mm |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Replaces | 19926 |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.60
Important compatibility info
| Length | 34.2 mm |
| Material | Rubber/Metal |
| Outer diameter | 30 mm. 40 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.32 kg |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.60
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 250 mm |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Weight | 0.022 kg |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.60
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023