Important compatibility info
Weight | 2.237 kg |
Material | Cast Aluminium |
Number of Wings | 4 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
for OE number | 103 200 37 01 |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint, with bearing |
Placement on Vehicle | Rear Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 23952 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.370 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.097 kg |
Function | Mounting, stabiliser bar |
Length | 58 mm |
Placement on Vehicle | Rear Axle |
Width | 31 mm |
Thickness | 59 mm |
Material | Rubber/Metal |
Inner diameter | 22.7 mm |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Additional Information 2 | with ball bearing |
Weight | 1.18 kg |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (181308)
- 1x Febi Rolling Bearing, suspension strut support mount (44799)
Important compatibility info
Weight | 0.14 kg |
Opening Temperature | 84 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 378.5 mm |
Mounting points diameter | 16.5 mm |
Weight | 0.321 kg |
Placement on Vehicle | both sides |
Length | 715 mm |
Eject Force | 160 N |
Stroke | 318 mm |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.104 kg |
Type | Oil Line, charger |
Forward- /Backflow | Supply Line |
Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 152 mm |
Inner diameter | 16 mm |
Placement on Vehicle | Front Axle |
Weight | 0.433 kg |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 66 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Weight | 0.860 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter (31431)
- 1x Febi Oil Filter (35421)
- 1x Febi Filter Kit, crankcase ventilation (172336)
- 1x Febi Seal, oil filter housing (05970)
- 1x Febi Gasket, centrifugal cleaner flange (35616)
- 1x Febi Seal Ring, oil drain plug (35640)
- 1x Febi Oil Filter (172139)
Important compatibility info
Additional Information | with oil supply line |
Additional Information 2 | with mounting kit |
Weight | 10.0 kg |
Charge Type | Exhaust Turbocharger |
Type | Charger, charging (supercharged/turbocharged) |
Function | Charger, charging (supercharged/turbocharged) |
Extra Description | Garrett Turbo ProKit NEW |
Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charger, charging (supercharged/turbocharged) (187027)
- 1x Febi Mounting Kit, charger (187848)
- 1x Febi Oil Line, charger (187849)
Important compatibility info
Weight | 0.02 kg |
Length | 54.5 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 51840909 |
Placement on Vehicle | Rear Axle |
Width | 44.5 mm |
Outer diameter | 249.5 mm |
Thickness | 61 mm |
Inner diameter | 203.2 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 60 mm |
Weight | 4.39 kg |
Number of mounting bores | 2 |
Max.skimmed drum measure | 204.7 mm |
Rim Hole Number | 4 -Hole |
Type | Brake Drum |
Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.130 kg |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 23808 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of circuits | 4 |
Cable Length | 400 mm |
Spanner Size | 22 |
Weight | 0.092 kg |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M8 x 1,25 |
Weight | 0.08 kg |
Length | 70 mm. 34 mm |
Width | 30 mm |
Material | Rubber/Metal |
Outer diameter | 47 mm. 50 mm |
Colour Coding | Green |
Placement on Vehicle | Rear, both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, automatic transmission |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.288 kg |
Cone Size | 17.2 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 177843 |
Additional Information 2 | with ball joint |
External Thread Size | M12 x 1,25 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | without adjusting element |
Paired article numbers | 197215 |
Number of Connectors / Ports | 6 |
Weight | 0.5 kg |
Type | Door Lock |
Function | Door Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Material | Cast Aluminium |
Placement on Vehicle | Rear Axle Right |
Brake Caliper Type | Brake Caliper (1 piston) |
Type | Brake Caliper |
Weight | 1.68 kg |
Paired article numbers | 181962 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Placement on Vehicle | Left Rear, Right Rear |
Length | 1780 mm |
Brake Type | Drum Brake |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Air Filter |
Height | 45 mm |
Length | 285 mm |
Weight | 0.315 kg |
Width | 215 mm |
Filter type | Filter Insert |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023