Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 205 mm |
Material | Steel |
Paired article numbers | 29287 |
Thread Type | with right-hand thread |
Function | Tie Rod End |
External Thread Size | M10 x 1,25 |
Weight | 0.75 kg |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 65.2 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Material | Aluminium |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Type | Mounting, control/trailing arm |
Weight | 0.45 kg |
Replaces | 29346 |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower, Front, Rear Axle Right |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.156 kg |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Inner diameter | 12.3 mm |
Thickness | 60 mm |
Outer diameter | 60 mm |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.493 kg |
Outer diameter | 38 mm |
Type | Inner Tie Rod |
Spanner Size | 35 |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5, M12 x 1,5 |
Additional Information | with counter nut |
Length | 181 mm |
Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.489 kg |
Additional Information | with counter nut |
External Thread Size | M16 x 1, M12 x 1,25 |
Placement on Vehicle | Front Axle Right |
Length | 212 mm |
Paired article numbers | 24969 |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Length | 38 mm |
Function | Stop- /Mounting Buffer |
Outer diameter | 75 mm |
Thickness | 45 mm |
Weight | 0.414 kg |
External Thread Size | M12 x 1,5 |
Type | Stop- /Mounting Buffer |
Buffer Design | A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.75 kg |
Length | 205 mm |
Placement on Vehicle | Front Axle Left |
Material | Steel |
Paired article numbers | 29288 |
Thread Type | with right-hand thread |
External Thread Size | M10 x 1,25 |
Function | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 211 mm |
Paired article numbers | 24968 |
Function | Inner Tie Rod |
Additional Information | with counter nut |
Weight | 0.487 kg |
Extra Description | ProKit |
External Thread Size | M16 x 1, M12 x 1,25 |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.173 kg |
Length | 248 mm |
Height | 30 mm |
Width | 180 mm |
Filter type | Filter Insert, Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Air Filter |
Weight | 0.326 kg |
Filter type | Filter Insert |
Width | 200 mm |
Height | 46 mm |
Length | 294 mm |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 180 mm |
Weight | 0.03 kg |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Material | Metal |
Type | Link/Coupling Rod, stabiliser bar |
Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 110 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.305 kg |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Placement on Vehicle | Rear Axle Left |
Length | 75 mm |
Material | Steel |
Paired article numbers | 28462 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Pipe Diameter | 9 mm |
Extra Description | ProKit |
Additional Information | with nuts |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M10 x 1,5 |
Length | 325 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Colour | Silver |
Function | Link/Coupling Rod, stabiliser bar |
Thickness | 47.5 mm |
Spanner Size | 17 |
Additional Information | with nuts |
Weight | 0.300 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Diameter | 1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (22579)
- 2x Febi Nut (22263)
Important compatibility info
Weight | 0.2 kg |
Cooling Hose | from expansion tank to water pipe |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.192 kg |
Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 47 mm |
Thickness | 49 mm |
Inner diameter | 14 mm |
Shape/Form | slotted |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.263 kg |
Placement on Vehicle | Front Axle Left, Rear, Lower, Outer, Front Axle Right |
Length | 50 mm |
Outer diameter | 43 mm |
Inner diameter | 14 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 75 mm |
Outer diameter | 54 mm |
Inner diameter | 14.5 mm |
Steering arm type | for semi-trailing arm |
Function | Mounting, control/trailing arm |
Weight | 0.272 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Weight | 0.300 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 65 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Pump Type | Dual Pump |
Weight | 0.108 kg |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Replaces | 24453; 26471 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Brake Cylinder |
Weight | 0.157 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Piston Diameter | 17.8 mm |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Placement on Vehicle | Rear Axle |
Length | 64 mm |
Width | 72 mm |
Material | Rubber |
Thickness | 70 mm |
Inner diameter | 27 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 194 mm |
Outer diameter | 96 mm |
Filter type | Spin-on Filter |
Function | Oil Filter |
Internal Thread Size | 3/4" - 16 UNF |
Weight | 0.665 kg |
Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 174 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter 1 | 2 mm |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Material | Thermoplastic polyester elastomer |
Additional Information 2 | with clamps |
Inner diameter 2 | 61 mm |
Weight | 0.062 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.44 kg |
Length | 109 mm |
Material | Thermoplast |
Inner diameter 1 | 26 mm |
Inner diameter 2 | 78 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (03185)
- 1x Febi Bellow, drive shaft (03596)
- 1x Febi Spring Washer (07254)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi Nut, kingpin (08023)
Important compatibility info
Height | 110 mm |
Outer diameter | 94 mm |
Weight | 0.50 kg |
Function | Hydraulic Filter, automatic transmission |
Gasket outer diameter | 71.05 mm |
Internal Thread Size | M33 x 1,5 |
Gasket inner diameter | 62.75 mm |
Filter type | Spin-on Filter |
Type | Hydraulic Filter, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.31 kg |
Length | 449 mm |
Height | 32 mm |
Width | 120 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 50 mm |
Inner diameter | 10.4 mm |
Material | Rubber/Metal |
Outer diameter | 45.1 mm |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
Type | Mounting, control/trailing arm |
Weight | 0.179 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 0.290 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
for OE number | 1300716080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Material | ACM (Polyacrylate) |
Weight | 0.024 kg |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.126 kg |
Type | Filter, cabin air |
Function | Filter, cabin air |
Filter type | Pollen Filter |
Height | 57 mm |
Width | 235 mm |
Length | 226 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.065 kg |
for OE number | LR 010965 |
Opening Pressure | 2.0 bar |
Type | Cap, coolant tank |
Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.142 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 460 mm |
Spanner Size | 17 |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front Axle Right |
Length | 229 mm |
Material | Steel |
Paired article numbers | 31250 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 0.30 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 100 mm |
Height | 14 mm |
Material | ACM (Polyacrylate) |
Function | Shaft Seal, external planetary gearbox |
Type | Shaft Seal, external planetary gearbox |
Inner diameter | 86 mm |
Weight | 0.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.009 kg |
Width | 15 mm |
Outer diameter | 21 mm |
Inner diameter | 15 mm |
Bearing Type | Needle Bearing |
Function | Pilot Bearing, clutch |
Type | Pilot Bearing, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.30 kg |
Placement on Vehicle | Front Axle Left |
Length | 229 mm |
Material | Steel |
Paired article numbers | 31251 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 8 mm |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Wheel Side |
Weight | 0.198 kg |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 44 mm |
Inner diameter 1 | 30 mm |
Length | 77 mm |
Type | Bellow Kit, drive shaft |
Bellows Material | Polychloroprene (Neoprene) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (26840)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (38763)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Circlip (03196)
Important compatibility info
Outer diameter | 44.2 mm |
Thickness | 59 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, outer |
Material | Rubber/Metal |
Inner diameter | 14.3 mm |
Weight | 0.262 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 17008 |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Weight | 0.355 kg |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Replaces | 18496; 19346 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.110 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 195 mm |
Material | Thermoplast |
Function | Bellow Kit, steering |
Inner diameter 2 | 64 mm |
Additional Information 2 | with clamps |
Type | Bellow Kit, steering |
Inner diameter 1 | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (26506)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38764)
Important compatibility info
Outer diameter | 162 mm |
Height | 351 mm |
Inner diameter | 93 mm |
Filter type | Filter Insert |
Weight | 0.856 kg |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 261 mm |
Height | 29 mm |
Width | 218 mm |
Weight | 0.190 kg |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 140 mm |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Rear Axle |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.333 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,75 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 105 mm |
Thickness | 10 mm. 11 mm |
Inner diameter | 88 mm |
Function | Seal Ring, drive shaft mounting |
Weight | 0.080 kg |
Type | Seal Ring, drive shaft mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.057 kg |
Placement on Vehicle | Front Axle Right |
Length | 185 mm |
Material | Thermoplast |
Inner diameter 2 | 39 mm |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Inner diameter 1 | 13 mm |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (101865)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38760)
Important compatibility info
Placement on Vehicle | Rear Axle Upper, Rear, inner, Outer |
Outer diameter | 48 mm. 25 mm |
Thickness | 48 mm |
Inner diameter | 20 mm |
Function | Mounting, control/trailing arm |
Weight | 0.157 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.075 kg |
Placement on Vehicle | Front Axle Left, only fitted on one side |
Length | 955 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.165 kg |
Function | Radiator Hose |
Cooling Hose | from engine to oil cooler and water pump |
Type | Radiator Hose |
Hose Length | 133 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023