Important compatibility info
Material | Rubber |
Length | 87 mm |
Inner diameter 2 | 66 mm |
Inner diameter 1 | 20 mm |
Function | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Weight | 0.279 kg |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100211)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.400 kg |
Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
Length | 71 mm |
Material | Steel |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.009 kg |
Width | 15 mm |
Outer diameter | 21 mm |
Inner diameter | 15 mm |
Bearing Type | Needle Bearing |
Function | Pilot Bearing, clutch |
Type | Pilot Bearing, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.1 kg |
Material | Plastic |
Function | Coolant Flange |
Additional Information | with gasket/seal |
Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | frontal sided |
Width | 7 mm |
Outer diameter | 68 mm |
Inner diameter | 48 mm |
Function | Shaft Seal, crankshaft |
Weight | 0.023 kg |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.33 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing Kit |
Width 2 | 17 mm |
Outer diameter 2 | 59 mm |
Width 1 | 14 mm |
Outer diameter 1 | 40 mm |
Inner diameter 2 | 32 mm |
Inner diameter 1 | 17.5 mm |
Type | Wheel Bearing Kit |
Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (04941)
- 1x Febi Wheel Bearing (08392)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 170 mm |
Material | Thermoplast |
Inner diameter 1 | 21 mm |
Inner diameter 2 | 57 mm |
Function | Bellow Kit, steering |
Weight | 0.08 kg |
Additional Information 2 | with clamps |
Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (38737)
- 1x Febi Clamping Clip (02092)
- 1x Febi Clamping Clip (33359)
Important compatibility info
Type | Valve Seat |
for OE number | 20530103 |
Function | Valve Seat |
Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.31 kg |
Length | 449 mm |
Height | 32 mm |
Width | 120 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 910 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.050 kg |
Height | 125 mm |
Outer diameter | 53 mm |
Filter type | Filter Insert |
Seal Diameter | 58 mm |
Type | Oil Filter |
Function | Oil Filter |
Additional Information | with gasket/seal, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.038 kg |
Function | Gasket, exhaust manifold |
Material | Sheet Steel |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.126 kg |
Type | Filter, cabin air |
Function | Filter, cabin air |
Filter type | Pollen Filter |
Height | 57 mm |
Width | 235 mm |
Length | 226 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 17008 |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Weight | 0.355 kg |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Replaces | 18496; 19346 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.025 kg |
Length | 78 mm |
Width | 28 mm |
Thickness | 25 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Function | Stop Light Switch |
Type | Stop Light Switch |
Housing Colour | black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 103 mm |
Rod/Strut | Coupling Rod |
Weight | 0.162 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 174 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter 1 | 2 mm |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Material | Thermoplastic polyester elastomer |
Additional Information 2 | with clamps |
Inner diameter 2 | 61 mm |
Weight | 0.062 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.142 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 460 mm |
Spanner Size | 17 |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 194 mm |
Outer diameter | 96 mm |
Filter type | Spin-on Filter |
Function | Oil Filter |
Internal Thread Size | 3/4" - 16 UNF |
Weight | 0.665 kg |
Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 0.36 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 102 mm |
Thickness | 76 mm |
Spanner Size | 19 |
Function | Tie Rod End |
Extra Description | ProKit |
Additional Information | with lock nut |
Type | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023