Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.380 kg |
| Length | 263 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Surface | Zinc-coated |
| Function | Link/Coupling Rod, stabiliser bar |
| Outer diameter | 10.9 mm |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Weight | 0.43 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 57 mm |
| Inner diameter 1 | 24 mm |
| Material | Rubber |
| Length | 100 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08019)
- 1x Febi Clamping Clip (38764)
- 1x Febi Gasket, transfer case (08020)
- 1x Febi Circlip (05336)
- 1x Febi High Temperature Lubricant (03630)
£11.89
Important compatibility info
| Piston Diameter | 20.6 mm |
| Function | Wheel Brake Cylinder |
| Weight | 0.35 kg |
| Type | Wheel Brake Cylinder |
| Paired article numbers | 12390 |
| Material | Grey Cast Iron |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Weight | 0.160 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 470 mm |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 140 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| External Thread Size | M10 x 1,25 |
| Weight | 0.21 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Weight | 0.30 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 170 mm |
| Material | Steel |
| Spanner Size | 14 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Surface | Painted |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Replaces | 41626 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Length | 230 mm |
| Weight | 0.240 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 8 mm |
| Material | Steel |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Opening Temperature | 82 °C |
| Function | Thermostat, coolant |
| Weight | 0.06 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Weight | 0.177 kg |
| Length | 1735 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
| Outer diameter | 150 mm |
| Material | MVQ (silicone rubber) |
| Thickness | 12 mm |
| Inner diameter | 127 mm |
| Weight | 0.125 kg |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 100 mm |
| Inner diameter | 10.3 mm |
| Spanner Size | 16 |
| Rod/Strut | Coupling Rod |
| Thread Length | 25 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.304 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.89
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Weight | 0.518 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Steel |
| Paired article numbers | 31971 |
| Thread Type | with right-hand thread |
| DIN / ISO | 985 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| External Thread Size | M10 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.90
Important compatibility info
| Height | 140 mm |
| Outer diameter | 65 mm |
| Additional Information 2 | with seal ring |
| Filter type | Filter Insert |
| Weight | 0.08 kg |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket outer diameter | 81 mm |
| Gasket inner diameter | 73 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.90
Important compatibility info
| Weight | 0.600 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 213 mm |
| Paired article numbers | 28711 |
| Surface | Zinc-coated |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.90
Important compatibility info
| Extra Description | ProKit |
| Function | Mounting, control/trailing arm |
| Weight | 0.219 kg |
| Type | Mounting, control/trailing arm |
| Inner diameter | 13 mm |
| Additional Information 2 | with bolts/screws |
| Thickness | 50 mm |
| Material | Rubber/Metal |
| Outer diameter | 60 mm |
| Placement on Vehicle | Rear, Front Axle Left, Front Axle Right |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (108377)
- 2x Febi Fastening Bolt, control arm (173406)
- 1x Febi Nut (103239)
- 1x Febi Nut (39159)
£11.90
Important compatibility info
| Weight | 0.030 kg |
| Placement on Vehicle | Rear Axle |
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.90
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
| Weight | 0.297 kg |
| Inner diameter | 42.9 mm |
| Thickness | 56 mm |
| Material | Rubber |
| Width | 70 mm |
| Length | 82 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.90
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 271 mm |
| Material | Steel |
| Paired article numbers | 27514 |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 9 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.340 kg |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.90
Important compatibility info
| Function | Tie Rod End |
| Thread Type | with right-hand thread |
| Surface | Zinc-coated |
| Colour | Silver |
| Spanner Size | 19 |
| Material | Steel |
| Length | 71 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.30 kg |
| Internal Thread Size | M12 x 1,25 |
| External Thread Size | M12 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.90
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,5 |
| Weight | 0.518 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Steel |
| Paired article numbers | 31972 |
| Thread Type | with right-hand thread |
| DIN / ISO | 985 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.90
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023