Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Lower Right |
| Weight | 0.235 kg |
| Inner diameter 1 | 42 mm |
| Inner diameter 2 | 41 mm |
| Function | Radiator Hose |
| Cooling Hose | from thermostat to radiator |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Seal Diameter | 70 mm |
| Weight | 0.43 kg |
| Type | Fuel filter |
| Filter type | Spin-on Filter, with water separator |
| Height | 152 mm |
| Outer diameter | 85 mm |
| Function | Fuel filter |
| Internal Thread Size | M10 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Type | Filter, cabin air |
| Length | 213 mm |
| Height | 47 mm |
| Width | 193 mm |
| Filter type | Pollen Filter |
| Weight | 0.112 kg |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Joint Type | Tripod Joint |
| Weight | 0.21 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 102 mm |
| Material | Rubber |
| Inner diameter 2 | 76 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (01047)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
£12.08
Important compatibility info
| Weight | 0.460 kg |
| Placement on Vehicle | Left Rear, Right Rear |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Replaces | 22734 |
| Length | 1700 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Filter type | Filter Insert |
| Length | 277 mm |
| Height | 43 mm |
| Width | 198 mm |
| Weight | 0.244 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 10 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 48 mm |
| Inner diameter | 35 mm |
| Function | Shaft Seal, crankshaft |
| Weight | 0.01 kg |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Function | Cap, wheel bearing |
| Inner diameter | 54 mm |
| Weight | 0.04 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Cap, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | PU (Polyurethane) |
| Thickness | 134 mm |
| Function | Rubber Buffer, suspension |
| Weight | 0.1 kg |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.05 kg |
| Additional Information | with gasket/seal |
| Outer diameter | 44 mm |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.013 kg |
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Paired article numbers | 106500 |
| Type | Gasket, timing case cover |
| Function | Gasket, timing case cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.014 kg |
| Placement on Vehicle | transmission sided |
| Outer diameter | 110 mm |
| Thickness | 7 mm |
| Inner diameter | 90 mm |
| Material | FPM (fluoride rubber) |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Length | 79 mm |
| Material | Rubber |
| Inner diameter 1 | 21 mm |
| Inner diameter 2 | 79 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.34 kg |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03183)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Circlip (03215)
- 1x Febi Molybdenum Grease (02582)
£12.08
Important compatibility info
| Length | 55 mm |
| Width | 61 mm |
| Material | Rubber/Metal |
| Outer diameter | 60.5 mm |
| Thickness | 60 mm |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Weight | 0.13 kg |
| Function | Mounting, control/trailing arm |
| Inner diameter | 12 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.384 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 308 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Surface | Zinc-coated |
| Thread Length | 23 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Thickness | 62 mm |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Length | 1170 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Weight | 0.153 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Material | Paper |
| Colour | Green |
| Weight | 0.010 kg |
| Function | Gasket, automatic transmission oil sump |
| Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Internal Thread Size | M16 |
| Length | 254 mm |
| Function | Holder, Wheel Chock |
| Type | Holder, Wheel Chock |
| Weight | 0.150 kg |
| Material | PA (polyamide) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.02 kg |
| Placement on Vehicle | frontal sided |
| Width | 7 mm |
| Outer diameter | 65 mm |
| Function | Shaft Seal, camshaft |
| Colour | Brown |
| Inner diameter | 51 mm |
| Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Height | 85 mm |
| Outer diameter | 65.4 mm |
| Weight | 0.22 kg |
| Type | Oil Filter, transmission (E-Axle) |
| Function | Oil Filter, transmission (E-Axle) |
| Gasket outer diameter | 62.3 mm |
| Gasket inner diameter | 53.9 mm |
| Internal Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023