Important compatibility info
Weight | 0.035 kg |
Number of Connectors / Ports | 4 |
Function | Relay, fuel pump |
Relay Number | 67, 80, 167 |
Type | Relay, fuel pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Weight | 0.4 kg |
Type | Thermostat, coolant |
Seal Material | PTFE (polytetrafluoroethylene) |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (46333)
- 1x Febi Seal, thermostat (47288)
Important compatibility info
Function | Sensor, exhaust pressure |
Number of Connectors / Ports | 3 |
Weight | 0.021 kg |
Type | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 48102 |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Lower, Front Axle Left |
Material | Steel |
Steering arm type | Control Arm |
Weight | 10.76 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.836 kg |
Type | Master Cylinder, clutch |
Function | Master Cylinder, clutch |
for OE number | 00 4128 5311 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 0.047 kg |
for OE number | BRK FITTING KIT 153 |
Type | Accessory Kit, disc brake pad |
Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake caliper piston diameter | 41 mm |
Type | Brake Caliper |
Function | Brake Caliper |
Paired article numbers | 183213 |
Additional Information | with electric motor |
Material | Cast Iron |
Weight | 3.0 kg |
Placement on Vehicle | Rear Axle Left |
Brake Caliper Type | Brake Caliper (1 piston) |
Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Intake Side |
Additional Information 2 | without screw |
Number of Teeth | 42 |
Weight | 0.612 kg |
Type | Camshaft Adjuster |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rated Power | 5.5 kW |
Weight | 9.70 kg |
Number of Teeth | 12 |
Voltage | 24 V |
for OE number | 21164603 |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head Cover |
Colour | Black |
Material | ACM (Polyacrylate), Plastic |
for OE number | 25203036 |
Weight | 1.34 kg |
Extra Description | febi Plus |
Type | Cylinder Head Cover |
Additional Information | with gasket/seal |
Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.353 kg |
Placement on Vehicle | Front Axle |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09225)
- 2x Febi Screw (05140)
- 2x Febi Nut (05139)
- 1x Febi Nut (37722)
- 1x Febi Rolling Bearing, suspension strut support mount (01111)
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.551 kg |
Type | Hydraulic Hose, steering |
Function | Hydraulic Hose, steering |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 363 mm |
Height | 76 mm |
Width | 105 mm |
Filter type | Filter Insert |
Function | Air Filter |
Weight | 0.22 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.417 kg |
Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
Length | 69 mm |
Material | Rubber |
Outer diameter | 35 mm |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.83 kg |
Type | Throttle body |
Height | 112 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 5 |
Function | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tilt Cylinder, driver cab |
Pressure side external thread size | M14 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Length | 1342 mm |
Weight | 9.0 kg |
Outer diameter | 50 mm. 52 mm |
Number of Connectors / Ports | 2 |
Stroke | 596 mm |
Mounting points diameter | 20 mm. 30 mm |
Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 1150 mm |
Function | Sensor, wheel speed |
Weight | 0.054 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, housing cover (crankcase) |
Weight | 0.31 kg |
Type | Gasket, housing cover (crankcase) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electronic |
Number of Connectors / Ports | 2 |
Function | Boost Pressure Control Valve |
Weight | 0.21 kg |
Type | Boost Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Right |
Weight | 0.650 kg |
for OE number | 22 11 6 859 414 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket Set, cylinder head cover |
Weight | 0.102 kg |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Weight | 0.47 kg |
Placement on Vehicle | Front Axle Left |
Length | 341 mm |
Material | Steel |
Paired article numbers | 28576 |
Rod/Strut | Coupling Rod |
Colour | Black |
Surface | Painted |
Spanner Size | 19 |
Function | Link/Coupling Rod, stabiliser bar |
Replaces | 41673 |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Water pump impeller material | Metal |
Weight | 1.1 kg |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
for OE number | 16100-39565 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.068 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 950 mm |
Function | Sensor, wheel speed |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of circuits | 2 |
Function | Cable Repair Set, central electrics |
Cable Length | 250 mm |
Extra Description | febi Plus |
Type | Cable Repair Set, central electrics |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 967 241 10 13 |
Placement on Vehicle | Rear, both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 2.500 kg |
Type | Mounting, engine |
Replaces | 108061 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.5 kg |
Outer diameter | 270 mm |
Operating Mode | Electronic |
Function | Clutch, radiator fan |
Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 960 300 00 04 |
Operating Mode | Electronic |
Weight | 0.445 kg |
Type | Accelerator Pedal |
Function | Accelerator Pedal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with sensor |
Type | Housing, oil filter |
Function | Housing, oil filter |
Extra Description | febi Plus |
Weight | 1.5 kg |
Additional Information | with gasket/seal, with oil cooler, with oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner length 1 | 868 mm |
Weight | 1.108 kg |
Outer length 1 | 1143 mm |
Inner length 2 | 900 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Outer length 2 | 1122 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023