Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 276 mm |
| Height | 64 mm |
| Width | 186 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Weight | 0.22 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Height | 123 mm |
| Additional Information | with gaskets/seals |
| Outer diameter | 67 mm |
| Filter type | Filter Insert |
| Weight | 0.091 kg |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket outer diameter | 80.5 mm |
| Gasket inner diameter | 74.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.164 kg |
| Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
| Length | 105 mm |
| Material | Thermoplast |
| Inner diameter 2 | 82 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100640)
- 1x Febi Clamping Clip (45643)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (100869)
£12.77
Important compatibility info
| Weight | 0.62 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 150 mm |
| Material | Steel |
| Colour | Silver |
| Surface | Zinc-coated |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Inner diameter | 58 mm |
| Inner diameter 2 | 61 mm |
| Function | Radiator Hose |
| Weight | 0.5 kg |
| Type | Radiator Hose |
| Hose Length | 184 mm |
| Wall Thickness | 6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Paired article numbers | 21584 |
| Placement on Vehicle | Front Axle Left |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Weight | 0.4 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.540 kg |
| Placement on Vehicle | Left Rear |
| Length | 1674 mm |
| Function | Cable Pull, parking brake |
| Paired article numbers | 101804 |
| Type | Cable Pull, parking brake |
| Replaces | 16918 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 181 mm |
| Material | Steel |
| Paired article numbers | 34756 |
| Colour | Black |
| Surface | Painted |
| Weight | 0.55 kg |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.203 kg |
| Function | Mounting, stabiliser bar |
| Inner diameter | 39 mm |
| Thickness | 62 mm |
| Outer diameter | 63 mm |
| Material | Rubber/Metal |
| Width | 67 mm |
| Length | 53 mm |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Placement on Vehicle | Rear Axle, Upper |
| Material | PU (Polyurethane) |
| Outer diameter | 135 mm |
| Thickness | 74 mm |
| Colour | Yellow |
| Function | Rubber Buffer, suspension |
| Weight | 0.13 kg |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.360 kg |
| Height | 140 mm |
| Outer diameter | 175 mm |
| Inner diameter | 96 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Placement on Vehicle | Front Axle Right, transmission sided |
| Length | 120 mm |
| Material | Rubber |
| Inner diameter 1 | 36 mm |
| Inner diameter 2 | 100 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (05239)
- 1x Febi Clamping Clip (38760)
- 1x Febi High Temperature Lubricant (03630)
£12.77
Important compatibility info
| Length | 359 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.607 kg |
| for OE number | 3812.E5 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Function | Gasket, automatic transmission oil sump |
| Colour | Green |
| Material | Paper |
| Weight | 0.020 kg |
| Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Placement on Vehicle | engine sided |
| Length | 775 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 3 |
| Weight | 0.033 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Function | Gasket, cylinder head cover |
| Weight | 0.04 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.400 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 308 mm |
| Paired article numbers | 26634 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.600 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 213 mm |
| Paired article numbers | 28710 |
| Surface | Zinc-coated |
| Function | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 274 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Weight | 0.596 kg |
| Spanner Size | 30 |
| for OE number | 45503-19255 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| External Thread Size | M18 x 1,5, M12 x 1,5 |
| Additional Information | with lock nut |
| Function | Angled Ball Joint, steering push rod |
| Thread Type | with right-hand thread |
| Paired article numbers | 10111 |
| Weight | 0.312 kg |
| Type | Angled Ball Joint, steering push rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Inner diameter 2 | 62 mm |
| Function | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 210 mm |
| Material | Thermoplast |
| Inner diameter 1 | 16 mm |
| Weight | 0.200 kg |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (40058)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi High Temperature Lubricant (03630)
£12.77
Important compatibility info
| Length | 208 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Weight | 0.270 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.515 kg |
| Function | Tie Rod End |
| for OE number | 1306716080 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Length | 100 mm |
| Function | Bolt, wheel alignment |
| External Thread Size | M38 x 1,5 LHT |
| Weight | 0.28 kg |
| Type | Bolt, wheel alignment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Outer diameter | 20 mm. 25 mm |
| Inner diameter | 19 mm. 14 mm |
| Function | Radiator Hose |
| Weight | 0.163 kg |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.313 kg |
| Placement on Vehicle | Lower Front Axle, both sides |
| Function | Repair Kit, guide strut |
| Type | Repair Kit, guide strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (04192)
- 1x Febi Screw (04225)
- 1x Febi Nut (05161)
- 2x Febi Washer (04191)
£12.77
Important compatibility info
| Height | 86.3 mm |
| Outer diameter | 106.4 mm |
| Weight | 0.155 kg |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cover, fuel filter |
| Function | Cover, fuel filter |
| Gasket outer diameter | 108 mm |
| Gasket inner diameter | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Spanner Size | 19 |
| Paired article numbers | 10110 |
| Thread Type | with left-hand thread |
| Function | Angled Ball Joint, steering push rod |
| External Thread Size | M18 x 1,5, M12 x 1,5 |
| Weight | 0.312 kg |
| Type | Angled Ball Joint, steering push rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Length | 105 mm |
| Material | Steel |
| Paired article numbers | 15411 |
| Rod/Strut | Coupling Rod |
| Weight | 0.100 kg |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Length | 229 mm. 235 mm |
| Height | 16 mm |
| Width | 87 mm. 92 mm |
| Filter type | Pollen Filter |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
| Weight | 0.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Placement on Vehicle | Rear Axle Right, outer |
| Length | 185 mm |
| Weight | 0.080 kg |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Paired article numbers | 185032 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.586 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 90 mm |
| Material | Rubber/Metal |
| Outer diameter | 57 mm |
| Inner diameter | 12 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.48 kg |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 25 mm |
| Rod/Strut | Coupling Rod |
| Thickness | 52.5 mm |
| Outer diameter | 10 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 335 mm |
| Additional Information | with nuts |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Length | 252 mm |
| Height | 60 mm |
| Width | 204 mm |
| Filter type | Filter Insert |
| Weight | 0.65 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Function | Oil Filter |
| Filter type | Filter Insert |
| Weight | 0.063 kg |
| Inner diameter | 20 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 62 mm |
| Height | 95 mm |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.077 kg |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 61 mm |
| Material | PU (Polyurethane) |
| Length | 76 mm |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Length | 405 mm |
| Height | 34 mm |
| Width | 174 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Weight | 0.260 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.153 kg |
| Length | 99 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 74 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (48808)
- 1x Febi Clamping Clip (12852)
- 1x Febi Clamping Clip (45641)
- 1x Febi Molybdenum Grease (02582)
£12.77
Important compatibility info
| Weight | 0.012 kg |
| Function | Gasket Set, hydraulic pump |
| Extra Description | febi Plus |
| Type | Gasket Set, hydraulic pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Paired article numbers | 10657 |
| Weight | 0.400 kg |
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M10 x 1,25 |
| Additional Information | with counter nut |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Weight | 0.55 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 181 mm |
| Material | Steel |
| Paired article numbers | 34755 |
| Colour | Black |
| Surface | Painted |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 0.352 kg |
| Spanner Size | 18 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 333 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (36043)
- 2x Febi Nut, stabiliser bar (22264)
£12.78
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 0.047 kg |
| for OE number | BRK FITTING KIT 153 |
| Type | Accessory Kit, disc brake pad |
| Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.78
Important compatibility info
| Weight | 0.13 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 540 mm |
| Outer diameter | 10 mm |
| Inner diameter | 3 mm |
| Spanner Size | 14 |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.78
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M10 x 1 |
| Length | 475 mm |
| Weight | 0.135 kg |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.78
Important compatibility info
| Length | 116 mm |
| Material | Rubber |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 100 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.127 kg |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38364)
- 1x Febi Clamping Clip (38757)
- 1x Febi High Temperature Lubricant (03630)
£12.78
Important compatibility info
| Weight | 0.212 kg |
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 86 mm |
| Material | Rubber |
| Inner diameter 1 | 20 mm |
| Inner diameter 2 | 80 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173209)
- 1x Febi Molybdenum Grease (02582)
£12.79
Important compatibility info
| Weight | 0.055 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.79
Important compatibility info
| Thread Length | 23.4 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 288 mm |
| Material | Steel |
| Outer diameter | 9 mm |
| Weight | 0.336 kg |
| External Thread Size | M10 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.79
Important compatibility info
| Thickness | 63 mm |
| Inner diameter | 14.3 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Outer diameter | 67 mm |
| Placement on Vehicle | Lower, Front, Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Weight | 0.377 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.79
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023