Important compatibility info
Weight | 0.653 kg |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Right |
Length | 200 mm |
Paired article numbers | 24815 |
Function | Tie Rod End |
Extra Description | ProKit |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M10 x 1,25 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Number of Connectors / Ports | 6 |
Control Type | Push Actuation |
Switch Lighting | Red |
Function | Switch, rear window heating |
Weight | 0.035 kg |
Extra Description | febi Plus |
Type | Switch, rear window heating |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Material | Steel |
Spanner Size | 17, 13 |
Length | 105 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Colour | Black |
Weight | 0.19 kg |
Additional Information | with rubber mounts |
External Thread Size | M10 x 1,25, M8 x 1,25 |
Rod/Strut | Coupling Rod |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with nut, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.010 kg |
Width | 12 mm |
Number of Teeth | 54 |
Surface | PTFE (Polytetrafluorethylene) coated |
Function | Toothed Belt, power take-off |
Belts | with rounded tooth profile |
Type | Toothed Belt, power take-off |
Units / Pulleys | Water Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link, timing chain |
Chain Type | Silent Chain |
Weight | 0.0043 kg |
Timing Chain Size | Z53 |
Type | Link, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.124 kg |
Placement on Vehicle | Rear Axle |
Function | Accessory Kit, brake shoes |
Type | Accessory Kit, brake shoes |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 9 mm |
Weight | 0.380 kg |
Placement on Vehicle | Front Axle Left |
Length | 263 mm |
Material | Steel |
Paired article numbers | 24928 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M12 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.040 kg |
Spanner Size | 24 |
Colour | Blue |
Number of Connectors / Ports | 3 |
Function | Switch, reverse light |
External Thread Size | M14 x 1,5 |
Type | Switch, reverse light |
Additional Information
Technical Information
Please note colour of connector
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.380 kg |
Placement on Vehicle | Front Axle Right |
Length | 263 mm |
Material | Steel |
Paired article numbers | 24929 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M12 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 968 mm |
Tensile Cord Material | Aramid |
Weight | 0.044 kg |
Alternator type | for starter generator |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Number of Ribs | 3 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hazard Warning Light Relay |
Voltage | 24 V |
Number of Connectors / Ports | 11 |
Thickness | 70 mm |
Width | 40 mm |
Length | 95 mm |
Weight | 0.115 kg |
Type | Hazard Warning Light Relay |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (21840)
- 1x Febi Nut (22263)
- 1x Febi Screw (21478)
Important compatibility info
Weight | 0.04 kg |
Operating Mode | Mechanical |
Function | Switch, reverse light |
Spanner Size | 19 |
Number of Connectors / Ports | 2 |
Type | Switch, reverse light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Weight | 0.168 kg |
Width | 206 mm |
Height | 44 mm |
Length | 237 mm |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 18 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Thickness | 57 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.262 kg |
Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.078 kg |
Length | 920 mm |
Type | Oil Dipstick, automatic transmission |
Function | Oil Dipstick, automatic transmission |
Extra Description | febi Plus |
Length from grip collar to max. marking | 790 mm |
Length from grip collar to min. marking | 845 mm |
Colour | Green |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.385 kg |
Placement on Vehicle | Rear Axle |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Length | 294 mm |
Spanner Size | 30 |
Weight | 0.591 kg |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5, M16 x 1 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length | 1584 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 312 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle |
Weight | 0.470 kg |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023