Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 79 °C |
Heating / Cooling | with vent hole |
Weight | 0.113 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (24643)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
Outer diameter | 60 mm |
Material | FPM (fluoride rubber) |
Additional Information 2 | with mounting sleeve |
Height | 8.5 mm |
Placement on Vehicle | frontal sided |
Inner diameter | 44 mm |
Weight | 0.03 kg |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 109 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Weight | 0.110 kg |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (03335)
- 1x Febi Spring Washer (03336)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
External Thread Size | M12 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Weight | 0.38 kg |
Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
Length | 106 mm |
Thickness | 76 mm |
Spanner Size | 17 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Weight | 0.53 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 88 mm |
Inner diameter 1 | 24 mm |
Length | 84 mm |
Replaces | 38337 |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Weight | 0.09 kg |
Replaces | 03490 |
Voltage | 12 V |
Function | Washer Fluid Pump, headlight cleaning |
Type | Washer Fluid Pump, headlight cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.075 kg |
Length | 95 mm |
Width | 95 mm |
Thickness | 27 mm |
Inner diameter 1 | 77 mm |
Colour | Black |
Outer diameter 1 | 93 mm |
Type | Cap, power steering fluid reservoir |
Function | Cap, power steering fluid reservoir |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chemical Properties | Elastic |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Length | 701 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Weight | 0.062 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Length | 294 mm |
Spanner Size | 30 |
Weight | 0.591 kg |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5, M16 x 1 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Weight | 0.07 kg |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.385 kg |
Placement on Vehicle | Rear Axle |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 65 mm |
Material | Steel |
Paired article numbers | 27359 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 12 mm |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Weight | 0.390 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.390 kg |
Placement on Vehicle | Front Axle Left |
Length | 65 mm |
Material | Steel |
Paired article numbers | 27360 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 12 mm |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.255 kg |
Placement on Vehicle | Lower Front Axle |
Outer diameter | 64 mm |
Thickness | 48 mm |
Inner diameter | 16 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Bulb Type | H3 |
Bulb Fitment Code | H3 |
Weight | 0.006 kg |
Function | Bulb / Bulb, front fog light |
Type | Bulb / Bulb, front fog light |
Rated Power | 70 W |
Fulfils ECE norm | R37 |
Base design light bulb | PK22s |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.149 kg |
Function | V-Ribbed Belt |
Number of Ribs | 6 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1463 mm |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.490 kg |
Height | 35 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Length | 354 mm |
Width | 236 mm |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 297 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Thread Length | 24.5 mm |
DIN / ISO | 985 |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Height | 52 mm |
Width | 240 mm |
Length | 241 mm |
Filter type | Filter Insert |
Weight | 0.40 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.392 kg |
Placement on Vehicle | Front Axle |
Length | 115 mm |
Width | 90 mm |
Material | Rubber |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Ignition Switch |
Number of Connectors / Ports | 7 |
Weight | 0.051 kg |
Type | Ignition Switch |
Control Type | Rotary Operation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.290 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Outer diameter | 65 mm |
Thickness | 80 mm |
Inner diameter | 12 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rated Power | 70 W |
Bulb Fitment Code | H1 |
Fulfils ECE norm | R37 |
Type | Bulb / Bulb, front fog light |
Voltage | 24 V |
Bulb Type | H1 |
Function | Bulb / Bulb, front fog light |
Weight | 0.006 kg |
Base design light bulb | P14.5s |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 174 mm |
Height | 30 mm |
Width | 140 mm |
Filter type | Pollen Filter |
Function | Filter Set, cabin air |
Weight | 0.05 kg |
Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Internal Thread Size | M12 x 1,5 |
Weight | 0.48 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 174 mm |
Thickness | 50 mm |
Spanner Size | 17 |
Type | Tie Rod End |
Function | Tie Rod End |
Extra Description | ProKit |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.491 kg |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Cone Size | 22 mm |
Mounting points diameter | 11 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Width | 25 mm |
Material | Rubber/Metal |
Outer diameter | 37 mm. 40 mm |
Thickness | 60 mm |
Inner diameter | 14 mm |
Function | Mounting, control/trailing arm |
Weight | 0.17 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Type | Mounting, support frame/subframe |
Placement on Vehicle | both sides, Lower, Front |
Length | 98 mm |
Outer diameter 1 | 13 mm |
Outer diameter 2 | 52.5 mm |
Function | Mounting, support frame/subframe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Outer diameter | 40.2 mm |
Type | Mounting, control/trailing arm |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Length | 133 mm |
Material | Rubber/Metal |
Weight | 0.346 kg |
Hole Spacing | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.108 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Function | Wheel Brake Cylinder |
Piston Diameter | 20.6 mm |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 104 mm |
Valve stem diameter | 6 mm |
Notches / Holes Number | 3 |
Function | Intake Valve |
Weight | 0.045 kg |
Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.398 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Metal |
Inner diameter | 27 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.105 kg |
Length | 46 mm. 65 mm |
Material | Rubber/Metal |
Outer diameter | 56 mm |
Inner diameter | 14 mm |
Placement on Vehicle | Rear Axle, Front |
Function | Mounting, control/trailing arm |
Steering arm type | for trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Weight | 0.38 kg |
Placement on Vehicle | Front Axle Left |
Length | 285 mm |
Paired article numbers | 28672 |
Rod/Strut | Coupling Rod |
Thread Length | 26.7 mm |
Additional Information | with nuts |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.39 kg |
Material | Metal |
Outer diameter | 130 mm |
Thickness | 26 mm |
Inner diameter | 12 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Rolling Bearing, suspension strut support mount |
Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | frontal sided |
Height | 6 mm |
Outer diameter | 52 mm |
Inner diameter | 40 mm |
Weight | 0.013 kg |
Type | Shaft Seal, crankshaft |
Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.247 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Outer diameter | 60 mm. 23 mm |
Thickness | 54 mm |
Inner diameter | 14 mm |
Width | 60 mm |
Length | 60 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Type | with right-hand thread |
Function | Tie Rod End |
Weight | 0.35 kg |
Additional Information | with lock nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Internal Thread Size | M12 x 1,25 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.480 kg |
Additional Information | with counter nut |
Length | 241 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M16 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.36 kg |
Inner diameter | 45 mm |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Function | Gasket, oil sump |
Weight | 0.05 kg |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod End |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left |
Length | 171 mm |
Paired article numbers | 108856 |
Weight | 0.49 kg |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M16 x 1,5 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.51 kg |
Placement on Vehicle | Right Rear |
Length | 2160 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Paired article numbers | 04671 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.064 kg |
Material | NBR (nitrile butadiene rubber) |
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.108 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Replaces | 08027 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with valve cover gasket |
Weight | 0.02 kg |
Material | Rubber |
Function | Gasket Set, cylinder head cover |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (15196)
- 1x Febi Gasket Set, cylinder head cover (15192)
Important compatibility info
Length | 288 mm |
Outer diameter | 161 mm |
Inner diameter | 86 mm |
Filter type | Filter Insert |
Weight | 0.500 kg |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.556 kg |
Placement on Vehicle | Front Axle |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 50 mm |
Outer diameter | 97 mm. 154 mm |
Additional Information 2 | without ball bearing |
Inner diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
for OE number | 34 41 0 410 823 |
Function | Accessory Kit, brake shoes |
Type | Accessory Kit, brake shoes |
Weight | 0.080 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.059 kg |
Material | Rubber/Metal |
Bolt Hole Circle Diameter | 50 mm |
Inner diameter | 21.5 mm |
Outer diameter | 72 mm |
Function | Joint, steering column |
Mounting points diameter | 8.4 mm |
Thickness | 12 mm |
Width | 65 mm |
Type | Joint, steering column |
Hole Spacing | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023