Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.146 kg |
| Function | Coolant Flange |
| Type | Coolant Flange |
| Additional Information | with gasket/seal |
| for OE number | 03L 121 132 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.226 kg |
| Placement on Vehicle | transmission sided, Front Axle |
| Length | 91 mm |
| Material | Rubber |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 67 mm |
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100302)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (29820)
- 1x Febi Molybdenum Grease (02582)
£13.07
Important compatibility info
| Width | 19 mm |
| Number of Teeth | 122 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
| Weight | 0.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Material | Steel |
| Weight | 0.030 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 86 mm |
| Thickness | 6.8 mm |
| Inner diameter | 70 mm |
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Material | Rubber |
| Function | Gasket, oil sump |
| Weight | 0.05 kg |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.26 kg |
| Pipe Diameter | 9 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 89 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.064 kg |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.08 kg |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Thickness | 119 mm |
| Placement on Vehicle | Rear Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.244 kg |
| Function | Hydraulic Filter, automatic transmission |
| Width | 157 mm |
| Length | 195 mm |
| Type | Hydraulic Filter, automatic transmission |
| Height | 21 mm |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Voltage | 12 V |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
| Weight | 0.105 kg |
| Replaces | 04800 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Length | 104 mm |
| Valve stem diameter | 6 mm |
| Notches / Holes Number | 3 |
| Function | Intake Valve |
| Weight | 0.045 kg |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.599 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 358 mm |
| Material | Steel |
| Paired article numbers | 19667 |
| Rod/Strut | Coupling Rod |
| External Thread Size | M12 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.421 kg |
| Length | 82 mm |
| Material | Rubber |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 83 mm |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Right |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (02414)
- 1x Febi Circlip (03185)
- 1x Febi Spring Washer (07254)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38757)
- 1x Febi Screw (03634)
- 1x Febi High Temperature Lubricant (03630)
£13.07
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.83 kg |
| Outer diameter | 52 mm |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.390 kg |
| Cone Size | 15.8 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Additional Information | with lock nut |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.11 kg |
| Placement on Vehicle | Right, outer, Lower |
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.108 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 20.6 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Pipe Diameter | 9 mm |
| Weight | 0.380 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 263 mm |
| Material | Steel |
| Paired article numbers | 24928 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.398 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Metal |
| Inner diameter | 27 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Weight | 0.2 kg |
| Function | Ball Head, gearshift linkage |
| Internal Thread Size | M10 x 1,5 |
| External Thread Size | M10 x 1,5 |
| Length | 36 mm |
| Cone Size | 13 mm |
| Type | Ball Head, gearshift linkage |
| Extra Description | ProKit |
| Placement on Vehicle | transmission sided |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023