Important compatibility info
Weight | 0.26 kg |
Pipe Diameter | 9 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 89 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.108 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Replaces | 08027 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with valve cover gasket |
Weight | 0.02 kg |
Material | Rubber |
Function | Gasket Set, cylinder head cover |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (15196)
- 1x Febi Gasket Set, cylinder head cover (15192)
Important compatibility info
Colour | Silver |
Function | Link/Coupling Rod, stabiliser bar |
Inner diameter | 10 mm |
Rod/Strut | Coupling Rod |
Material | Steel |
Length | 119 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.31 kg |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 22 mm |
Material | Plastic |
Outer diameter | 65 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
for OE number | 640 202 04 19 |
Weight | 0.104 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.480 kg |
Additional Information | with counter nut |
Length | 241 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M16 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25, M10 x 1,25 |
Weight | 0.31 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 135 mm |
Material | Steel |
Spanner Size | 19, 17 |
Rod/Strut | Coupling Rod |
Colour | Silver |
Thread Length | 29.2 mm |
Pipe Diameter | 9 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with washers |
Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Gasket inner diameter | 70 mm |
Function | Oil Filter |
Gasket outer diameter | 78 mm |
Type | Oil Filter |
Filter type | Filter Insert |
Weight | 0.078 kg |
Additional Information 2 | with seal ring |
Outer diameter | 64 mm |
Inner diameter | 32 mm |
Height | 123 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 59 mm |
Weight | 0.18 kg |
Width | 170 mm |
Type | Air Filter |
Function | Air Filter |
Filter type | Filter Insert |
Length | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Weight | 0.38 kg |
Placement on Vehicle | Front Axle Left |
Length | 285 mm |
Paired article numbers | 28672 |
Rod/Strut | Coupling Rod |
Thread Length | 26.7 mm |
Additional Information | with nuts |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 10658 |
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front Axle Left |
Weight | 0.426 kg |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.226 kg |
Placement on Vehicle | transmission sided, Front Axle |
Length | 91 mm |
Material | Rubber |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 67 mm |
Function | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100302)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (29820)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Type | Oil Filter |
Function | Oil Filter |
Additional Information | with gaskets/seals |
Thickness | 0.5 mm |
Length | 375 mm |
Seal Diameter | 133 mm. 110 mm |
Filter type | Centrifuge |
Width | 63 mm |
Weight | 0.030 kg |
for OE number | 2 386 074 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (172139)
- 1x Febi Gasket, centrifugal cleaner flange (35616)
- 1x Febi Gasket, oil filter housing (05970)
Important compatibility info
Weight | 0.244 kg |
Function | Hydraulic Filter, automatic transmission |
Width | 157 mm |
Length | 195 mm |
Type | Hydraulic Filter, automatic transmission |
Height | 21 mm |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.116 kg |
Length | 1370 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 5 |
DIN / ISO | 7867 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.028 kg |
Function | Repair Kit, relay valve |
Type | Repair Kit, relay valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 545 mm |
Spanner Size | 14 |
Thread Length | 14 mm |
Internal Thread Size | M10 x 1 |
Weight | 0.125 kg |
Function | Brake Hose |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.296 kg |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Placement on Vehicle | Front Axle |
Length | 140 mm |
Width | 86 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.39 kg |
Material | Metal |
Outer diameter | 130 mm |
Thickness | 26 mm |
Inner diameter | 12 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Rolling Bearing, suspension strut support mount |
Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.51 kg |
Placement on Vehicle | Right Rear |
Length | 2160 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Paired article numbers | 04671 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023